[prev in list] [next in list] [prev in thread] [next in thread]
List: openswan-users
Subject: Re: [Openswan Users] Clarification on dpdaction=clear
From: Leto <letoams () gmail ! com>
Date: 2013-09-11 13:29:01
Message-ID: E75367B5-34C1-412C-8EAE-D3CAC539521A () gmail ! com
[Download RAW message or body]
clear means go back to auto=add, loaded but not started. cleartext packets flow. hold means block packet flow until tunnel is back
sent from a tiny device
On 2013-09-11, at 6:17, divya mohan <m.divya.mohan@zoho.com> wrote:
> There is an IPSec connection like : Host A [initiator]--- Host B [responder].
>
> dpdaction=clear is configured on Host A.
>
> The connection between two hosts got broken (assume Host B was shutdown).
>
> Does the 'clear' means clearing IPSec security association, so that
> later if Host B comes up, IPSec tunnel will be re-established?
> Or does 'clear' means that the security policies will be cleared, so
> that later of Host B comes up, plain (un-encrypted) traffic will be
> sent?
> _______________________________________________
> Users@lists.openswan.org
> https://lists.openswan.org/mailman/listinfo/users
> Micropayments: https://flattr.com/thing/38387/IPsec-for-Linux-made-easy
> Building and Integrating Virtual Private Networks with Openswan:
> http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic