[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openswan-cvs
Subject:    [Openswan CVS] openswan-2/programs/starter starter.8.xml,1.1,1.2
From:       <ken () xelerance ! com>
Date:       2004-11-29 18:31:07
Message-ID: 20041129183107.35C0C138039 () tla ! xelerance ! com
[Download RAW message or body]

Update of /xelerance/master/openswan-2/programs/starter
In directory tla.xelerance.com:/tmp/cvs-serv26558

Modified Files:
	starter.8.xml 
Log Message:
doclifter'd output


Index: starter.8.xml
===================================================================
RCS file: /xelerance/master/openswan-2/programs/starter/starter.8.xml,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -d -r1.1 -r1.2
--- starter.8.xml	26 May 2004 17:51:19 -0000	1.1
+++ starter.8.xml	29 Nov 2004 18:31:04 -0000	1.2
@@ -0,0 +1,100 @@
+<?xml version="1.0" encoding="ISO-8859-1"?>
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+                   "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd">
+<!-- lifted from troff+man by doclifter -->
+<refentry id='starter8'>
+<refentryinfo><date>29 Nov 2004</date></refentryinfo>
+<refmeta>
+<refentrytitle>IPSEC_STARTER</refentrytitle>
+<manvolnum>8</manvolnum>
+<refmiscinfo class='date'>29 Nov 2004</refmiscinfo>
+</refmeta>
+<refnamediv id='name'>
+<refname>ipsec starter</refname>
+<refpurpose>start up the IPsec keying daemon (pluto) and load \
configuration</refpurpose> +</refnamediv>
+<!-- body begins here -->
+<refsynopsisdiv id='synopsis'>
+<cmdsynopsis>
+  <command>ipsec</command>    <arg \
choice='plain'><replaceable>starter</replaceable></arg> +    <arg choice='opt'><arg \
choice='plain'>--debug </arg><arg choice='plain'>--auto_reload \
<replaceable>seconds</replaceable></arg></arg> +</cmdsynopsis>
+</refsynopsisdiv>
+
+
+<refsect1 id='description'><title>DESCRIPTION</title>
+<para>Openswan Starter is aimed to replace all the scripts which are used to
+start and stop Openswan, and to do that in a quicker and a smarter way.</para>
+
+<para>It can also reload the configuration file if given a HUP<emphasis remap='B'> \
signal,  +and apply the changes.</emphasis></para>
+
+<para>What it will do:</para>
+
+<para>Load and unload KLIPS, or NETKEY (ipsec kernel module)</para>
+
+<para>Launch and monitor pluto.</para>
+
+<para>Add, initiate, route and delete connections</para>
+
+<para>Attach and detach interfaces according to config file</para>
+
+<para>kill -HUP can be used to reload the config file. New connections will be
+added, old ones will be removed and modified ones will be reloaded.
+Interfaces/Klips/Pluto will be reloaded if necessary.</para>
+
+<para>Upon startup, starter will save its pid to the file \
/var/run/ipsec-starter.pid</para> +
+<para>Upon reloading, dynamic DNS addresses will be resolved and updated. 
+Use --auto_reload to periodicaly check for dynamic DNS changes.</para>
+
+<para>kill -USR1 can be used to reload all connections.  This does a <emphasis \
remap='B'>delete</emphasis>,  +followed by an <emphasis remap='B'>add</emphasis> and \
then either a <emphasis remap='B'>route</emphasis> or <emphasis \
remap='B'>initiate</emphasis> operation.</para> +
+<para>/var/run/dynip/xxxx can be used to use a virtual interface name in
+ipsec.conf. By example, when adsl can be ppp0, ppp1, or some such, one
+can do:</para>
+
+<para><emphasis remap='B'>ipsec.conf: interfaces="ipsec0=adsl</emphasis>
+And use /etc/ppp/ip-up to create /var/run/dynip/adsl
+    /var/run/dynip/adsl:    IP_PHYS=ppp0</para>
+
+<para>%auto can be used to automaticaly name the connections</para>
+
+<para>kill -TERM can be used to stop Openswan. Pluto will be stopped and 
+kernel modules unloaded.</para>
+
+</refsect1>
+
+<refsect1 id='files'><title>FILES</title>
+<para>/etc/ipsec.conf</para>
+</refsect1>
+
+<refsect1 id='see_also'><title>SEE ALSO</title>
+<para><citerefentry><refentrytitle>ipsec</refentrytitle><manvolnum>8</manvolnum></citerefentry>, \
<citerefentry><refentrytitle>ipsec_tncfg</refentrytitle><manvolnum>8</manvolnum></citerefentry>, \
<citerefentry><refentrytitle>ipsec_pluto</refentrytitle><manvolnum>8</manvolnum></citerefentry></para>
 +</refsect1>
+
+<refsect1 id='history'><title>HISTORY</title>
+<para>Original by mlafon@arkoon.net for Arkoon Network Security. Updated for
+FreeS/WAN version 2 by Michael Richardson &lt;mcr@sandelman.ottawa.on.ca&gt;.
+Merged into Openswan 2.2 by Xelerance Corporation</para>
+</refsect1>
+
+<refsect1 id='todobugs'><title>TODO/BUGS</title>
+<para>handle wildcards in include lines -- use glob() fct ex: include \
/etc/ipsec.*.conf</para> +
+<para>handle duplicates keywords and sections</para>
+
+<para>Support also keyword</para>
+
+<para>add unsupported keywords</para>
+
+<para>manually keyed connections</para>
+
+<para>%defaultroute</para>
+
+<para>IPv6</para>
+
+</refsect1>
+</refentry>
+

_______________________________________________
Cvs mailing list
Cvs@openswan.org
http://lists.openswan.org/mailman/listinfo/cvs


[prev in list] [next in list] [prev in thread] [next in thread]