[prev in list] [next in list] [prev in thread] [next in thread]
List: opensuse-hu
Subject: Re: [opensuse-hu] HP scanjet 3670 szkenner
From: Szágyi Károly <szagyi () fotokaresz ! hu>
Date: 2011-06-30 19:07:15
Message-ID: 4E0CC963.1010205 () fotokaresz ! hu
[Download RAW message or body]
2011-06-30 20:09 keltezéssel, Horváth István írta:
> Szágyi Károly írta:
>> Sziasztot !
>>
>> Adott ez a szkenner.
>> A Sane támogatja,benne van a driver listában az lsusb látja a szkennert
>> A yast > szkenner driver beállítás telepíti a drivert de nem talál hozzá
>> szkennert ami egyébként ott van a listában.
>>
>> Ah HP setup semmit nem tud csinálni vele, utána néztem A HP setupnak be
>> kell tudni állítani ezt az eszközt.
>>
>> Windowson működik :)
>>
>> Szóval most passz, esetleg valaki használ ilyen eszközt, vagy van
>> tapasztalat HP szkenner ügyben. Köszönöm, ha tudtok segíteni.
>>
> Szerintem ebből HAL és UDEV konfigfájlok kézi tákolása lesz,
> attól meg szokott oldódni az ilyen hiba.
> (Pontosabbat sajnos nem tudok írni erre a modellre...
> dmesg és lsusb kimenetet tudsz küldeni?)
openSUSE 11.4
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 03f0:1405 Hewlett-Packard ScanJet 3670
__________________
dmesg
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 03f0:1405 Hewlett-Packard ScanJet 3670
apa@suseapa:~> dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37.6-0.5-default (geeko@buildhost) (gcc
version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) )
#1 SMP 2011-04-25 21:48:33 +0200
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff40000 (usable)
[ 0.000000] BIOS-e820: 000000007ff40000 - 000000007ff50000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff50000 - 0000000080000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or
disabled in BIOS!
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: P4i65G/P4i65G, BIOS P1.40 07/31/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] last_pfn = 0x7ff40 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ ffb000-1000000
[ 0.000000] RAMDISK: 374d2000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 369b4000 - 374d132e
[ 0.000000] Move RAMDISK from 00000000374d2000 - 0000000037fef32d to
369b4000 - 374d132d
[ 0.000000] ACPI: RSDP 000fa570 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 7ff40000 00030 (v01 A M I OEMRSDT 07000731
MSFT 00000097)
[ 0.000000] ACPI: FACP 7ff40200 00081 (v02 A M I OEMFACP 07000731
MSFT 00000097)
[ 0.000000] ACPI: DSDT 7ff40370 03B3B (v01 P4i6G P4i6G133 00000133
INTL 02002026)
[ 0.000000] ACPI: FACS 7ff50000 00040
[ 0.000000] ACPI: APIC 7ff40300 0006C (v01 A M I OEMAPIC 07000731
MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ff50040 0003F (v01 A M I OEMBIOS 07000731
MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007ff40
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ff40
[ 0.000000] On node 0 totalpages: 523983
[ 0.000000] free_area_init_node: node 0, pgdat c0902c00, node_mem_map
f59b4200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2319 pages used for memmap
[ 0.000000] HighMem zone: 294451 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap:
80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f5400000 s27264 r0 d21888
u1048576
[ 0.000000] pcpu-alloc: s27264 r0 d21888 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 519888
[ 0.000000] Kernel command line:
root=/dev/disk/by-id/ata-SAMSUNG_SP2514N_S08BJ1CPC36221-part2
resume=/dev/disk/by-id/ata-SAMSUNG_SP2514N_S08BJ1CPC36221-part1
splash=silent quiet vga=0x31a
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10481600 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007ff40)
[ 0.000000] Memory: 2048176k/2096384k available (4109k kernel code,
47756k reserved, 3127k data, 428k init, 1187080k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd33000 - 0xfffff000 (2864 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0912000 - 0xc097d000 ( 428 kB)
[ 0.000000] .data : 0xc0603783 - 0xc0911708 (3127 kB)
[ 0.000000] .text : 0xc0200000 - 0xc0603783 (4109 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f4408000 soft=f440a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2999.925 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5999.85 BogoMIPS (lpj=11999700)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.004066] Security Framework initialized
[ 0.004090] AppArmor: AppArmor initialized
[ 0.004163] Mount-cache hash table entries: 512
[ 0.004319] Initializing cgroup subsys ns
[ 0.004324] ns_cgroup deprecated: consider using the 'clone_children'
flag without the ns_cgroup.
[ 0.004328] Initializing cgroup subsys cpuacct
[ 0.004334] Initializing cgroup subsys memory
[ 0.004347] Initializing cgroup subsys devices
[ 0.004350] Initializing cgroup subsys freezer
[ 0.004353] Initializing cgroup subsys net_cls
[ 0.004356] Initializing cgroup subsys blkio
[ 0.004404] CPU: Physical Processor ID: 0
[ 0.004407] CPU: Processor Core ID: 0
[ 0.004410] mce: CPU supports 4 MCE banks
[ 0.004423] CPU0: Thermal monitoring enabled (TM1)
[ 0.004428] using mwait in idle threads.
[ 0.004438] Performance Events: Netburst events, Netburst P4/Xeon PMU
driver.
[ 0.004449] ... version: 0
[ 0.004451] ... bit width: 40
[ 0.004453] ... generic registers: 18
[ 0.004455] ... value mask: 000000ffffffffff
[ 0.004457] ... max period: 0000007fffffffff
[ 0.004459] ... fixed-purpose events: 0
[ 0.004461] ... event mask: 000000000003ffff
[ 0.005117] ACPI: Core revision 20101013
[ 0.013558] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.013854] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053548] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[ 0.056000] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056000] CPU 1 irqstacks, hard=f44a2000 soft=f44a4000
[ 0.056000] Booting Node 0, Processors #1
[ 0.008000] Initializing CPU#1
[ 0.148040] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148095] Brought up 2 CPUs
[ 0.148101] Total of 2 processors activated (11999.62 BogoMIPS).
[ 0.148465] devtmpfs: initialized
[ 0.148465] regulator: core version 0.5
[ 0.148465] regulator: dummy:
[ 0.148465] Time: 18:57:26 Date: 06/30/11
[ 0.148465] NET: Registered protocol family 16
[ 0.148623] ACPI: bus type pci registered
[ 0.148767] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[ 0.148770] PCI: Using configuration type 1 for base access
[ 0.149779] bio: create slab <bio-0> at 0
[ 0.152596] ACPI: EC: Look up EC in DSDT
[ 0.154656] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.159318] ACPI: Interpreter enabled
[ 0.159325] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.159361] ACPI: Using IOAPIC for interrupt routing
[ 0.164395] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW
(20101013/scan-743)
[ 0.165173] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW
(20101013/scan-743)
[ 0.165425] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW
(20101013/scan-743)
[ 0.165674] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW
(20101013/scan-743)
[ 0.167631] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW
(20101013/scan-743)
[ 0.170016] ACPI: No dock devices found.
[ 0.170023] PCI: Ignoring host bridge windows from ACPI; if
necessary, use "pci=use_crs" and report a bug
[ 0.170190] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.170541] pci_root PNP0A03:00: host bridge window [io
0x0000-0x0cf7] (ignored)
[ 0.170546] pci_root PNP0A03:00: host bridge window [io
0x0d00-0xffff] (ignored)
[ 0.170550] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff] (ignored)
[ 0.170554] pci_root PNP0A03:00: host bridge window [mem
0x80000000-0xffefffff] (ignored)
[ 0.170573] pci 0000:00:00.0: [8086:2570] type 0 class 0x000600
[ 0.170579] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.170590] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.170654] pci 0000:00:01.0: [8086:2571] type 1 class 0x000604
[ 0.170697] pci 0000:00:06.0: [8086:2576] type 0 class 0x000880
[ 0.170709] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
[ 0.170795] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03
[ 0.170844] pci 0000:00:1d.0: reg 20: [io 0xe000-0xe01f]
[ 0.170881] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03
[ 0.170929] pci 0000:00:1d.1: reg 20: [io 0xe400-0xe41f]
[ 0.170967] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03
[ 0.171015] pci 0000:00:1d.2: reg 20: [io 0xe800-0xe81f]
[ 0.171051] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03
[ 0.171099] pci 0000:00:1d.3: reg 20: [io 0xec00-0xec1f]
[ 0.171149] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03
[ 0.171173] pci 0000:00:1d.7: reg 10: [mem 0xfebffc00-0xfebfffff]
[ 0.171261] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.171267] pci 0000:00:1d.7: PME# disabled
[ 0.171286] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.171334] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601
[ 0.171404] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.171426] pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101
[ 0.171442] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.171453] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.171464] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.171475] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.171486] pci 0000:00:1f.1: reg 20: [io 0xfc00-0xfc0f]
[ 0.171498] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.171529] pci 0000:00:1f.2: [8086:24d1] type 0 class 0x000101
[ 0.171544] pci 0000:00:1f.2: reg 10: [io 0xd400-0xd407]
[ 0.171554] pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003]
[ 0.171564] pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07]
[ 0.171574] pci 0000:00:1f.2: reg 1c: [io 0xc800-0xc803]
[ 0.171584] pci 0000:00:1f.2: reg 20: [io 0xc400-0xc40f]
[ 0.171618] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05
[ 0.171667] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.171709] pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401
[ 0.171726] pci 0000:00:1f.5: reg 10: [io 0xd800-0xd8ff]
[ 0.171737] pci 0000:00:1f.5: reg 14: [io 0xdc00-0xdc3f]
[ 0.171747] pci 0000:00:1f.5: reg 18: [mem 0xfebff800-0xfebff9ff]
[ 0.171758] pci 0000:00:1f.5: reg 1c: [mem 0xfebff400-0xfebff4ff]
[ 0.171800] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.171805] pci 0000:00:1f.5: PME# disabled
[ 0.171837] pci 0000:01:00.0: [10de:0326] type 0 class 0x000300
[ 0.171854] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.171864] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff pref]
[ 0.171897] pci 0000:01:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref]
[ 0.171955] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.171960] pci 0000:00:01.0: bridge window [io 0xf000-0x0000]
(disabled)
[ 0.171965] pci 0000:00:01.0: bridge window [mem 0xfc900000-0xfe9fffff]
[ 0.171971] pci 0000:00:01.0: bridge window [mem
0xcfe00000-0xefdfffff pref]
[ 0.172016] pci 0000:02:01.0: [109e:036e] type 0 class 0x000400
[ 0.172037] pci 0000:02:01.0: reg 10: [mem 0xefefe000-0xefefefff pref]
[ 0.172130] pci 0000:02:01.1: [109e:0878] type 0 class 0x000480
[ 0.172151] pci 0000:02:01.1: reg 10: [mem 0xefeff000-0xefefffff pref]
[ 0.172249] pci 0000:02:05.0: [10ec:8139] type 0 class 0x000200
[ 0.172268] pci 0000:02:05.0: reg 10: [io 0xb800-0xb8ff]
[ 0.172279] pci 0000:02:05.0: reg 14: [mem 0xfeaffc00-0xfeaffcff]
[ 0.172337] pci 0000:02:05.0: supports D1 D2
[ 0.172341] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.172346] pci 0000:02:05.0: PME# disabled
[ 0.172386] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive
decode)
[ 0.172391] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.172397] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.172402] pci 0000:00:1e.0: bridge window [mem
0xefe00000-0xefefffff pref]
[ 0.172408] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff]
(subtractive decode)
[ 0.172412] pci 0000:00:1e.0: bridge window [mem
0x00000000-0xffffffff] (subtractive decode)
[ 0.172426] pci_bus 0000:00: on NUMA node 0
[ 0.172432] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.172550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.182028] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.182147] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12
14 15)
[ 0.182263] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[ 0.182378] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12
14 15)
[ 0.182494] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.182611] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.182728] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12
14 15)
[ 0.182844] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.182898] HEST: Table is not found!
[ 0.183184] SCSI subsystem initialized
[ 0.183285] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.183292] vgaarb: loaded
[ 0.183323] PCI: Using ACPI for IRQ routing
[ 0.183323] PCI: pci_cache_line_size set to 64 bytes
[ 0.183323] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.183323] reserve RAM buffer: 000000007ff40000 - 000000007fffffff
[ 0.183323] NetLabel: Initializing
[ 0.183323] NetLabel: domain hash size = 128
[ 0.183323] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.183323] NetLabel: unlabeled traffic allowed by default
[ 0.183323] hpet clockevent registered
[ 0.183323] HPET: 3 timers in total, 0 timers will be used for
per-cpu timer
[ 0.183323] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.183323] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.188025] Switching to clocksource tsc
[ 0.189903] AppArmor: AppArmor Filesystem Enabled
[ 0.189920] pnp: PnP ACPI init
[ 0.189953] ACPI: bus type pnp registered
[ 0.190172] pnp 00:00: [bus 00-ff]
[ 0.190177] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.190181] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.190184] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.190187] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.190190] pnp 00:00: [mem 0x00000000 window]
[ 0.190194] pnp 00:00: [mem 0x80000000-0xffefffff window]
[ 0.190276] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.190353] pnp 00:01: [dma 4]
[ 0.190356] pnp 00:01: [io 0x0000-0x000f]
[ 0.190359] pnp 00:01: [io 0x0081-0x0083]
[ 0.190362] pnp 00:01: [io 0x0087]
[ 0.190365] pnp 00:01: [io 0x0089-0x008b]
[ 0.190368] pnp 00:01: [io 0x008f]
[ 0.190370] pnp 00:01: [io 0x00c0-0x00df]
[ 0.190426] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.190450] pnp 00:02: [io 0x0070-0x0071]
[ 0.190466] pnp 00:02: [irq 8]
[ 0.190519] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.190537] pnp 00:03: [io 0x0061]
[ 0.190590] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.190608] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.190618] pnp 00:04: [irq 13]
[ 0.190673] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.191621] pnp 00:05: [io 0x03f0-0x03f5]
[ 0.191625] pnp 00:05: [io 0x03f7]
[ 0.191631] pnp 00:05: [irq 6]
[ 0.191635] pnp 00:05: [dma 2]
[ 0.191735] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.192731] pnp 00:06: [io 0x0010-0x001f]
[ 0.192735] pnp 00:06: [io 0x0022-0x003f]
[ 0.192738] pnp 00:06: [io 0x0044-0x005f]
[ 0.192741] pnp 00:06: [io 0x0062-0x0063]
[ 0.192744] pnp 00:06: [io 0x0065-0x006f]
[ 0.192747] pnp 00:06: [io 0x0072-0x007f]
[ 0.192750] pnp 00:06: [io 0x0080]
[ 0.192753] pnp 00:06: [io 0x0084-0x0086]
[ 0.192755] pnp 00:06: [io 0x0088]
[ 0.192758] pnp 00:06: [io 0x008c-0x008e]
[ 0.192761] pnp 00:06: [io 0x0090-0x009f]
[ 0.192764] pnp 00:06: [io 0x00a2-0x00bf]
[ 0.192767] pnp 00:06: [io 0x00e0-0x00ef]
[ 0.192770] pnp 00:06: [io 0x04d0-0x04d1]
[ 0.192773] pnp 00:06: [io 0x0800-0x087f]
[ 0.192776] pnp 00:06: [io 0x0000-0xffffffff disabled]
[ 0.192779] pnp 00:06: [io 0x0480-0x04bf]
[ 0.192783] pnp 00:06: [mem 0xfed20000-0xfed8ffff]
[ 0.192786] pnp 00:06: [mem 0xff380000-0xffefffff]
[ 0.192888] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.193041] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[ 0.193045] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[ 0.193125] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.193186] pnp 00:08: [io 0x0060]
[ 0.193190] pnp 00:08: [io 0x0064]
[ 0.193197] pnp 00:08: [irq 1]
[ 0.193257] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
[ 0.193361] pnp 00:09: [irq 12]
[ 0.193420] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13
(active)
[ 0.193836] pnp 00:0a: [io 0x0000-0xffffffff disabled]
[ 0.193840] pnp 00:0a: [io 0x0680-0x06ff]
[ 0.193843] pnp 00:0a: [io 0x0295-0x0296]
[ 0.193925] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.194266] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.194271] pnp 00:0b: [mem 0x000c0000-0x000dffff]
[ 0.194274] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.194278] pnp 00:0b: [mem 0x00100000-0x7fffffff]
[ 0.194281] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[ 0.194372] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.194710] pnp: PnP ACPI: found 12 devices
[ 0.194713] ACPI: ACPI bus type pnp unregistered
[ 0.194718] PnPBIOS: Disabled by ACPI PNP
[ 0.194737] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.194742] system 00:06: [io 0x0800-0x087f] has been reserved
[ 0.194746] system 00:06: [io 0x0480-0x04bf] has been reserved
[ 0.194750] system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.194754] system 00:06: [mem 0xff380000-0xffefffff] has been reserved
[ 0.194763] system 00:07: [mem 0xfec00000-0xfec00fff] could not be
reserved
[ 0.194767] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.194776] system 00:0a: [io 0x0680-0x06ff] has been reserved
[ 0.194780] system 00:0a: [io 0x0295-0x0296] has been reserved
[ 0.194788] system 00:0b: [mem 0x00000000-0x0009ffff] could not be
reserved
[ 0.194793] system 00:0b: [mem 0x000c0000-0x000dffff] could not be
reserved
[ 0.194797] system 00:0b: [mem 0x000e0000-0x000fffff] could not be
reserved
[ 0.194801] system 00:0b: [mem 0x00100000-0x7fffffff] could not be
reserved
[ 0.194805] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.232675] pci 0000:00:1f.1: BAR 5: assigned [mem 0x80000000-0x800003ff]
[ 0.232684] pci 0000:00:1f.1: BAR 5: set to [mem
0x80000000-0x800003ff] (PCI address [0x80000000-0x800003ff])
[ 0.232689] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.232692] pci 0000:00:01.0: bridge window [io disabled]
[ 0.232698] pci 0000:00:01.0: bridge window [mem 0xfc900000-0xfe9fffff]
[ 0.232703] pci 0000:00:01.0: bridge window [mem
0xcfe00000-0xefdfffff pref]
[ 0.232711] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.232715] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.232722] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.232727] pci 0000:00:1e.0: bridge window [mem
0xefe00000-0xefefffff pref]
[ 0.232749] pci 0000:00:1e.0: setting latency timer to 64
[ 0.232754] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.232758] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.232761] pci_bus 0000:01: resource 1 [mem 0xfc900000-0xfe9fffff]
[ 0.232765] pci_bus 0000:01: resource 2 [mem 0xcfe00000-0xefdfffff pref]
[ 0.232769] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.232772] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.232775] pci_bus 0000:02: resource 2 [mem 0xefe00000-0xefefffff pref]
[ 0.232778] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.232781] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.232863] NET: Registered protocol family 2
[ 0.232975] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.233397] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.233959] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.234393] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.234396] TCP reno registered
[ 0.234401] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.234418] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.234634] NET: Registered protocol family 1
[ 0.234784] pci 0000:01:00.0: Boot video device
[ 0.234798] PCI: CLS 0 bytes, default 64
[ 0.234884] Unpacking initramfs...
[ 0.563407] Freeing initrd memory: 11384k freed
[ 0.573413] audit: initializing netlink socket (disabled)
[ 0.573439] type=2000 audit(1309460245.568:1): initialized
[ 0.590082] highmem bounce pool size: 64 pages
[ 0.590091] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.590331] VFS: Disk quotas dquot_6.5.2
[ 0.590381] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.590546] msgmni has been set to 426
[ 0.590824] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 254)
[ 0.590863] io scheduler noop registered
[ 0.590868] io scheduler deadline registered
[ 0.590893] io scheduler cfq registered (default)
[ 0.592234] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000,
using 5120k, total 131072k
[ 0.592238] vesafb: mode is 1280x1024x16, linelength=2560, pages=1
[ 0.592241] vesafb: protected mode interface info at c000:dcd0
[ 0.592244] vesafb: pmi: set display start = c00cdd06, set palette =
c00cdd70
[ 0.592246] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7
3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 0.592269] vesafb: scrolling: redraw
[ 0.592273] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.592898] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 0.592905] bootsplash: silentjpeg size 245922 bytes
[ 0.621130] bootsplash: ...found (1280x1024, 255920 bytes, v3).
[ 0.711313] Console: switching to colour frame buffer device 156x60
[ 0.799821] fb0: VESA VGA frame buffer device
[ 0.799934] ERST: Table is not found!
[ 0.799968] isapnp: Scanning for PnP cards...
[ 1.110243] isapnp: No Plug & Play device found
[ 1.110539] Non-volatile memory driver v1.3
[ 1.110543] Linux agpgart interface v0.103
[ 1.110805] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 1.116861] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 1.116961] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 1.154806] Fixed MDIO Bus: probed
[ 1.154918] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
[ 1.157635] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.157645] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.157804] mice: PS/2 mouse device common for all mice
[ 1.157924] cpuidle: using governor ladder
[ 1.157927] cpuidle: using governor menu
[ 1.158294] TCP cubic registered
[ 1.158358] NET: Registered protocol family 10
[ 1.158872] lo: Disabled Privacy Extensions
[ 1.159216] Registering the dns_resolver key type
[ 1.159279] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
[ 1.159295] Using IPI No-Shortcut mode
[ 1.159449] PM: Checking hibernation image partition
/dev/disk/by-id/ata-SAMSUNG_SP2514N_S08BJ1CPC36221-part1
[ 1.176538] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.327974] psmouse serio1: ID: 10 00 64
[ 2.031412] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input1
[ 2.033963] PM: Hibernation image not present or could not be loaded.
[ 2.033985] registered taskstats version 1
[ 2.034222] Magic number: 15:606:1000
[ 2.034235] pnp1: hash matches
[ 2.034256] pnp 00:02: hash matches
[ 2.034380] Freeing unused kernel memory: 428k freed
[ 2.034775] Write protecting the kernel text: 4112k
[ 2.034859] Write protecting the kernel read-only data: 2868k
[ 2.111223] libata version 3.00 loaded.
[ 2.135252] ata_piix 0000:00:1f.1: version 2.13
[ 2.135285] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[ 2.135341] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.135924] scsi0 : ata_piix
[ 2.136117] scsi1 : ata_piix
[ 2.138923] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00
irq 14
[ 2.138927] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08
irq 15
[ 2.138968] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[ 2.138978] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 2.139039] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.139540] scsi2 : ata_piix
[ 2.139672] scsi3 : ata_piix
[ 2.139756] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd000 bmdma
0xc400 irq 18
[ 2.139760] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc800 bmdma
0xc408 irq 18
[ 2.303213] ata4.00: ATA-7: WDC WD800JD-55MUA1, 10.01E01, max UDMA/133
[ 2.303219] ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.303477] ata1.00: ATA-7: SAMSUNG SP2514N, VF100-50, max UDMA/100
[ 2.303483] ata1.00: 488397168 sectors, multi 16: LBA48
[ 2.308256] ata4.00: configured for UDMA/133
[ 2.332279] ata1.00: configured for UDMA/100
[ 2.332455] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2514N
VF10 PQ: 0 ANSI: 5
[ 2.332708] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250
GB/232 GiB)
[ 2.332830] sd 0:0:0:0: [sda] Write Protect is off
[ 2.332835] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.332888] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.337295] sda: sda1 sda2 sda3
[ 2.337748] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.476339] ata2.00: ATAPI: ASUS DRW-1608P2S, 1.41, max UDMA/66
[ 2.476346] ata2.01: ATAPI: ASUS DRW-22B2L, 1.01, max UDMA/66
[ 2.492205] ata2.00: configured for UDMA/66
[ 2.508159] ata2.01: configured for UDMA/66
[ 2.521655] scsi 1:0:0:0: CD-ROM ASUS DRW-1608P2S
1.41 PQ: 0 ANSI: 5
[ 2.525263] scsi 1:0:1:0: CD-ROM ASUS DRW-22B2L
1.01 PQ: 0 ANSI: 5
[ 2.525573] scsi 3:0:0:0: Direct-Access ATA WDC WD800JD-55MU
10.0 PQ: 0 ANSI: 5
[ 2.525767] sd 3:0:0:0: [sdb] 156301488 512-byte logical blocks:
(80.0 GB/74.5 GiB)
[ 2.525895] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.525900] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.525953] sd 3:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.532894] sdb: sdb1
[ 2.533233] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.555898] ACPI: acpi_idle registered with cpuidle
[ 2.568049] udev[87]: starting version 166
[ 2.780764] usbcore: registered new interface driver usbfs
[ 2.780809] usbcore: registered new interface driver hub
[ 2.785778] rtc_cmos 00:02: RTC can wake from S4
[ 2.787095] usbcore: registered new device driver usb
[ 2.796524] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.796564] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.831171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.831233] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low)
-> IRQ 23
[ 2.831269] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.831276] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.831321] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 1
[ 2.852148] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.856060] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 2.856100] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
[ 2.860631] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.868025] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.868084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.868089] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.868092] usb usb1: Product: EHCI Host Controller
[ 2.868095] usb usb1: Manufacturer: Linux 2.6.37.6-0.5-default ehci_hcd
[ 2.868098] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.868335] hub 1-0:1.0: USB hub found
[ 2.868346] hub 1-0:1.0: 8 ports detected
[ 2.868542] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 2.868563] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.868568] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.868584] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 2.888099] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e000
[ 2.888159] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.888163] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.888167] usb usb2: Product: UHCI Host Controller
[ 2.888170] usb usb2: Manufacturer: Linux 2.6.37.6-0.5-default uhci_hcd
[ 2.888173] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.888464] hub 2-0:1.0: USB hub found
[ 2.888476] hub 2-0:1.0: 2 ports detected
[ 2.888654] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 2.888667] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.888672] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.888685] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 2.896074] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 2.896127] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.896131] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.896135] usb usb3: Product: UHCI Host Controller
[ 2.896138] usb usb3: Manufacturer: Linux 2.6.37.6-0.5-default uhci_hcd
[ 2.896141] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.896445] hub 3-0:1.0: USB hub found
[ 2.896457] hub 3-0:1.0: 2 ports detected
[ 2.896593] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 2.896604] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.896609] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.896621] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 2.908898] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 2.908974] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.908981] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.908986] usb usb4: Product: UHCI Host Controller
[ 2.908990] usb usb4: Manufacturer: Linux 2.6.37.6-0.5-default uhci_hcd
[ 2.908994] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.909957] hub 4-0:1.0: USB hub found
[ 2.909969] hub 4-0:1.0: 2 ports detected
[ 2.910425] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 2.910441] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.910448] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.910464] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5
[ 2.920074] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[ 2.920134] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.920138] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.920142] usb usb5: Product: UHCI Host Controller
[ 2.920145] usb usb5: Manufacturer: Linux 2.6.37.6-0.5-default uhci_hcd
[ 2.920148] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.920400] hub 5-0:1.0: USB hub found
[ 2.920411] hub 5-0:1.0: 2 ports detected
[ 3.182224] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 3.182231] PM: Basic memory bitmaps created
[ 3.193645] PM: Basic memory bitmaps freed
[ 3.271104] PM: Starting manual resume from disk
[ 3.271109] PM: Hibernation image partition 8:1 present
[ 3.271111] PM: Looking for hibernation image.
[ 3.271409] PM: Image not found (code -22)
[ 3.271412] PM: Hibernation image not present or could not be loaded.
[ 3.414405] EXT4-fs (sda2): mounted filesystem with ordered data
mode. Opts: acl,user_xattr
[ 3.497739] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
[ 3.532405] usb 4-1: new full speed USB device using uhci_hcd and
address 2
[ 3.713756] usb 4-1: New USB device found, idVendor=03f0, idProduct=1405
[ 3.713762] usb 4-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=12
[ 3.713766] usb 4-1: Product: HP Scanjet Scanner
[ 3.713769] usb 4-1: Manufacturer: Hewlett-Packard
[ 3.713772] usb 4-1: SerialNumber: CN39DS24B1
[ 5.201647] preloadtrace: systemtap: 1.4/0.149, base: f8d38000,
memory: 30data/39text/13ctx/13net/282alloc kb, probes: 34
[ 6.081291] udev[381]: starting version 166
[ 6.211104] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 6.211228] ACPI: Power Button [PWRB]
[ 6.211349] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.211430] ACPI: Power Button [PWRF]
[ 6.408054] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.592639] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.837118] Floppy drive(s): fd0 is 1.44M
[ 6.845179] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.853641] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.853739] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.853829] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 6.855265] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 6.856578] FDC 0 is a post-1991 82077
[ 6.859820] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22,
2004)
[ 6.859890] 8139cp 0000:02:05.0: This (id 10ec:8139 rev 10) is not an
8139C+ compatible chip, use 8139too
[ 6.918247] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 6.918335] 8139too 0000:02:05.0: PCI INT A -> GSI 22 (level, low) ->
IRQ 22
[ 6.919431] 8139too 0000:02:05.0: eth0: RealTek RTL8139 at
0xf9112c00, 00:25:22:10:ff:bb, IRQ 22
[ 7.085253] intel_rng: FWH not detected
[ 7.104656] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 7.104664] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 7.104939] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 7.112966] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 7.113200] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 7.256666] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 7.285842] WARNING! power/level is deprecated; use power/control instead
[ 7.412782] iTCO_vendor_support: vendor-support=0
[ 7.442719] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 7.442816] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 7.686461] IR NEC protocol handler initialized
[ 7.764029] intel8x0_measure_ac97_clock: measured 55546 usecs (2676
samples)
[ 7.764034] intel8x0: clocking to 48000
[ 7.830792] nvidia: module license 'NVIDIA' taints kernel.
[ 7.830798] Disabling lock debugging due to kernel taint
[ 8.383945] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 8.383958] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.384228] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.28
Wed Sep 29 09:47:25 PDT 2010
[ 8.406543] IR RC5(x) protocol handler initialized
[ 8.415617] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 8.415777] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1,
TCOBASE=0x0860)
[ 8.415900] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.523438] IR RC6 protocol handler initialized
[ 8.537462] IR JVC protocol handler initialized
[ 8.574795] IR Sony protocol handler initialized
[ 8.592355] lirc_dev: IR Remote Control driver registered, major 252
[ 8.594856] IR LIRC bridge handler initialized
[ 8.690880] Linux video capture interface: v2.00
[ 8.812827] bttv: driver version 0.9.18 loaded
[ 8.812833] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 8.812929] bttv: Bt8xx card found (0).
[ 8.812956] bttv 0000:02:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8.812972] bttv0: Bt878 (rev 17) at 0000:02:01.0, irq: 22, latency:
32, mmio: 0xefefe000
[ 8.813032] bttv0: detected: Leadtek WinFast VC 100 [card=114], PCI
subsystem ID is 107d:6607
[ 8.813038] bttv0: using: Winfast VC100 [card=114,autodetected]
[ 8.813094] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[ 8.813136] bt878 #0 [sw]: Test OK
[ 8.813293] bttv0: tuner absent
[ 8.813422] bttv0: registered device video0
[ 8.813498] bttv0: registered device vbi0
[ 8.813521] bttv0: PLL: 28636363 => 35468950 .. ok
[ 9.358413] Adding 2104476k swap on /dev/sda1. Priority:-1 extents:1
across:2104476k
[ 10.052528] device-mapper: uevent: version 1.0.3
[ 10.052863] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29)
initialised: dm-devel@redhat.com
[ 10.758172] kjournald starting. Commit interval 15 seconds
[ 10.758640] EXT3-fs (sda3): using internal journal
[ 10.758648] EXT3-fs (sda3): mounted filesystem with ordered data mode
[ 10.808371] fuse init (API version 7.15)
[ 13.202335] microcode: CPU0 sig=0xf49, pf=0x4, revision=0x3
[ 13.404523] microcode: CPU1 sig=0xf49, pf=0x4, revision=0x3
[ 13.407958] microcode: Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 13.608175] powernow: This module only works with AMD K7 CPUs
[ 15.377446] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 18.440910] /dev/vmmon[1606]: Module vmmon: registered with major=10
minor=165
[ 18.440921] /dev/vmmon[1606]: Module vmmon: initialized
[ 18.633012] /dev/vmci[1614]: VMCI: Driver initialized.
[ 18.633220] /dev/vmci[1614]: Module vmci: registered with major=10
minor=59
[ 18.633226] /dev/vmci[1614]: Module vmci: initialized
[ 19.074002] ppdev: user-space parallel port driver
[ 19.491046] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 19.491066] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x
mode
[ 19.491115] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[ 19.775844] /dev/vmnet: open called by PID 1735 (vmnet-bridge)
[ 19.775859] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 19.775909] /dev/vmnet: port on hub 0 successfully opened
[ 19.775954] bridge-eth0: up
[ 19.775962] bridge-eth0: attached
[ 21.114504] /dev/vmnet: open called by PID 1744 (vmnet-dhcpd)
[ 21.114521] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 21.114556] /dev/vmnet: port on hub 1 successfully opened
[ 21.259137] /dev/vmnet: open called by PID 1746 (vmnet-netifup)
[ 21.259155] /dev/vmnet: port on hub 1 successfully opened
[ 21.786442] /dev/vmnet: open called by PID 1802 (vmnet-dhcpd)
[ 21.786460] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 21.786510] /dev/vmnet: port on hub 8 successfully opened
[ 22.216706] /dev/vmnet: open called by PID 1806 (vmnet-natd)
[ 22.216725] /dev/vmnet: port on hub 8 successfully opened
[ 22.282399] /dev/vmnet: open called by PID 1807 (vmnet-netifup)
[ 22.282418] /dev/vmnet: port on hub 8 successfully opened
[ 24.077611] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[ 24.840614] w83627hf: Found W83627HF chip at 0x290
[ 27.440028] /dev/vmmon[1743]: HostIF_ReadUptime: detected
settimeofday: fixed uptimeBase old 18445434613446110699 new
18445434613443758144 attempts 1
[ 29.911470] bootsplash: status on console 0 changed to on
[ 44.634972] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0
__________________________
--
Szágyi Károly
www.fotokaresz.hu
www.myopensuse.hu
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic