[prev in list] [next in list] [prev in thread] [next in thread] 

List:       opensuse-factory
Subject:    Re: Slowroll and amdgpu-pro and alternatives
From:       Peter McD <peter.posts () gmx ! net>
Date:       2023-11-30 13:25:48
Message-ID: e1a7db74-e71d-48b9-83b6-dbd9b1a85f85 () gmx ! net
[Download RAW message or body]

Am 30.11.23 um 13:46 schrieb Patrik Jakobsson:
> On Thu, 2023-11-30 at 11:00 +0100, Peter McD wrote:
>> Am 30.11.23 um 09:24 schrieb Patrik Jakobsson:
>>> On Wed, 2023-11-29 at 12:38 +0100, Peter McD wrote:
>>>> Am 29.11.23 um 08:15 schrieb Patrik Jakobsson:
>>>>> On Tue, 2023-11-28 at 23:44 +0100, Peter McD wrote:
>>>>>> Am 28.11.23 um 15:40 schrieb Peter McD:
>>>>>>> Am 28.11.23 um 13:25 schrieb Patrik Jakobsson:
>>>>>>>> On Tue, 2023-11-28 at 13:14 +0100, Peter McD wrote:
>>>>>>>>>
>>>>>>>>> I use Leap 15.5 a my main system because of openCL for Darktable
>>>>>>>>> which
>>>>>>>>> simply works faster with the proprietary amdgpu-pro driver.
>>>> ...>
>>>>>>>> amd-opencl from AOMP should work fine with Tumbleweed.
>>>> ...
>>>>>> Installed and tested with an updated TW,=C2=A0 Darktable 4.4.2 cann=
ot find
>>>>>> opencl.
>>>>>
>>>>> Can you detect the card with clinfo?
>>>>
>>>> first the suggested link
>>>> ln -s /usr/lib64/libOpenCL.so.1 /usr/lib64/libOpenCL.so
>>> With this added, darktable opens libOpenCL.so on my machine but still
>>> doesn't
>>> enable opencl support. Perhaps it requires a certain version? I will t=
ry to
>>> compare this to a working amdgpu-pro installation.
>>>
>>> Other opencl applications like Indigo Benchmark works fine for me.
>>>>
>>>> still opencl not detected by Darktable
>>>> lux-tw:~ # clinfo
>>>> Number of platforms=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 0
>>>> ICD loader properties
>>>>  =C2=A0=C2=A0=C2=A0 ICD loader Name=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0 OpenCL ICD Loader
>>>>  =C2=A0=C2=A0=C2=A0 ICD loader Vendor=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0 OCL Icd free software
>>>>  =C2=A0=C2=A0=C2=A0 ICD loader Version=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 2=
.3.1
>>>>  =C2=A0=C2=A0=C2=A0 ICD loader Profile=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 O=
penCL 3.0
>>>> lux-tw:~ #
>>>
>>> You should be seeing your card here. Which AMD card do you have?
>>>
>>
>> AMD Radeon RX 6600
>
> Then your card is supported. I installed OpenCL from AOMP on a freshly i=
nstalled
> tumbleweed machine and clinfo worked out of the box. I saw you got some =
advise
> from Aaron. Please try that.
>
> I did some comparison between clinfo from an AMDGPU-PRO installation and=
 my AOMP
> build and it seems the AOMP build is missing Image support. I believe da=
rktable
> requires that as well. I'll try to enable it in the AOMP build.
>

Thanks.

I will next weekend do a new Tumbleweed installation an start again.

Peter
[prev in list] [next in list] [prev in thread] [next in thread]