[prev in list] [next in list] [prev in thread] [next in thread] 

List:       opensuse
Subject:    Re: why did eth0 suddenly stop working? Solved???
From:       Daniel Bauer <linux () daniel-bauer ! com>
Date:       2023-07-18 9:05:43
Message-ID: 623a65c5-0dc9-b8a1-abab-6ed536a93c5f () daniel-bauer ! com
[Download RAW message or body]

Thanks a lot everybody for the very valued input!

Am 18.07.23 um 02:10 schrieb Lew Wolfgang:

> Daniel said he configured the cameras for static IP. IIRC.  I've got mine
> (same brand) for DHCP from my Zyxel router.
> 
> But there's also a setting there for DNS.  It can be "Auto" or "Static".
> Mine is auto, how about yours, Daniel?

Hm. So I went again to the cameras web-interface. In fact there is a 
fixed IP-adress, BUT also DHCP was activated (this is only visible if 
you click a button, so I haven't seen it before).

I changed this to "static" and rebooted the camera: success.

Just to be sure, connected from the mini-pc I changed back to DHCP - 
reboot did /not/ work. Changed again to "static" - reboot works.

Did the same on the laptop - camera reboot worked no matter if that 
camera setting was DHCP or static...

So now I changed that in all cameras to static and hope my problem is 
solved...

What I still don't understand is why it works on the laptop with that 
camera-setting to DHCP, but not on the mini-PC. With my extremely 
limited knowledge I just typed "DHCP" in Yast software search, and see 
that laptop and pc have the same packages installed. They must be with 
default values because I never changed anything in these things...

Well, I'll see next Sunday what happens. If it didn't solve the problem 
I'll annoy you with another message here :-)

Thanks again for all the help!

Daniel
-- 
Daniel Bauer photographer Basel Málaga
Twitter: @Marsfotografo (often explicit nudes)
https://www.patreon.com/danielbauer
https://www.daniel-bauer.com (nudes)
[prev in list] [next in list] [prev in thread] [next in thread]