[prev in list] [next in list] [prev in thread] [next in thread]
List: opensuse
Subject: Re: why did eth0 suddenly stop working? CLOSE to get solved...
From: "Carlos E. R." <robin.listas () telefonica ! net>
Date: 2023-07-17 21:28:44
Message-ID: 290fdf8a-b7c6-0b01-9d36-294adff50beb () telefonica ! net
[Download RAW message or body]
[Attachment #2 (multipart/mixed)]
[Attachment #4 (text/plain)]
On 2023-07-17 22:47, joe a wrote:
> On 7/17/2023 4:30 PM, Carlos E. R. wrote:
>> On 2023-07-17 18:10, Daniel Bauer wrote:
>>> Am 17.07.23 um 17:52 schrieb Freek de Kruijf:
>>>> Op maandag 17 juli 2023 17:40:42 CEST schreef Daniel Bauer:
>>>>> BUT:
>>>>>
>>>>> Switching the cable again to the laptop, the camera booted.
>>>>>
>>>> Where does the camera boot from? An internal resource or an external
>>>> resource, like from your laptop.
>>>
>>> The cameras have their own web-interface that is reachable via their
>>> IP with firefox (in my case).
>>>
>>>> During boot where does it get its IP address from? A DHCP server on
>>>> your laptop?
>>>
>>> The cameras have a settings page, where (beneath a lot of other
>>> things) their fixed IP is set.
...........************************
>>>
>>> The eth0 IP is set fixed ("manual" for IPv4 in Network manager
>>> settings) on both the laptop and the pc, so there should be no DHCP.
>>>
>>>> Is there another outside resource needed when booting, which is not
>>>> available.
>>>
>>> No. There is a "reset" (to factory default) button, and a "reboot"
>>> button in the camera's web-interface. I think it does the reboot all
>>> by itself.
>>>
>>> As much as I know everything is saved within the camera (settings are
>>> the same, no matter from which computer I connect to them).
>>
>> Nevertheless, there is something the cameras want from the laptop, and
>> if the laptop is not present, they stall.
>>
>> You could use "ethereal" or "tcdump" to log the connection of one
>> camera to the laptop when you boot that camera.
>>
>
> I've not read each and every post, but I suspect the cameras will turn
> out to be set to obtain address via DHCP, the LAPTOP is enabled to
> provide DHCP (as server) and the PC is not.
No, he said they are configured on fixed addresses.
>
>> As your cameras and computer are on an isolated network, they can not
>> get infected by malware, so you could disable the automatic boot.
>>
>
> Not a sure bet. MALWARE can hitch a ride on removable media. "AIR GAP"
> is not a panacea.
Common... it is Linux, and he is not daft.
--
Cheers / Saludos,
Carlos E. R.
(from 15.4 x86_64 at Telcontar)
["OpenPGP_signature.asc" (application/pgp-signature)]
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic