[prev in list] [next in list] [prev in thread] [next in thread] 

List:       opensuse
Subject:    Re: why did eth0 suddenly stop working? CLOSE to get solved...
From:       Daniel Bauer <linux () daniel-bauer ! com>
Date:       2023-07-17 16:10:39
Message-ID: b54d0608-ea87-54fe-79ea-3b3c8228e18a () daniel-bauer ! com
[Download RAW message or body]



Am 17.07.23 um 17:52 schrieb Freek de Kruijf:
> Op maandag 17 juli 2023 17:40:42 CEST schreef Daniel Bauer:
>> BUT:
>>
>> Switching the cable again to the laptop, the camera booted.
>>
> Where does the camera boot from? An internal resource or an external resource,
> like from your laptop.

The cameras have their own web-interface that is reachable via their IP 
with firefox (in my case).

> During boot where does it get its IP address from? A DHCP server on your
> laptop?

The cameras have a settings page, where (beneath a lot of other things) 
their fixed IP is set.

The eth0 IP is set fixed ("manual" for IPv4 in Network manager settings) 
on both the laptop and the pc, so there should be no DHCP.

> Is there another outside resource needed when booting, which is not available.

No. There is a "reset" (to factory default) button, and a "reboot" 
button in the camera's web-interface. I think it does the reboot all by 
itself.

As much as I know everything is saved within the camera (settings are 
the same, no matter from which computer I connect to them).


-- 
Daniel Bauer photographer Basel Málaga
Twitter: @Marsfotografo (often explicit nudes)
https://www.patreon.com/danielbauer
https://www.daniel-bauer.com (nudes)
[prev in list] [next in list] [prev in thread] [next in thread]