[prev in list] [next in list] [prev in thread] [next in thread]
List: opensuse
Subject: Re: [opensuse] SMART daemon question
From: Matthias Bach <marix () marix ! org>
Date: 2008-10-31 13:03:11
Message-ID: 200810311403.12021.marix () marix ! org
[Download RAW message or body]
Hi!
Am Freitag, 31. Oktober 2008 12:29 schrieb Carlos E. R.:
> On Friday, 2008-10-31 at 10:51 +0100, Matthias Bach wrote:
> > Hi!
> >
> > Am Donnerstag, 30. Oktober 2008 21:34 schrieb Carlos E. R.:
> >> Notice that if the
> >> temperature changes just one degree from one check to the next, it is
> >> reported. This is absurd, IMO.
> >
> > AFAIK it reports a change of 1 in the normalized Temperatur value, that
> > does not have to mean a change of one degree.
>
> ]> Device: /dev/sdb, SMART Usage Attribute: 194 Temperature_Celsius
> ]> changedfrom 43 to 42
>
>
> Huh? "Celsius" are temperature degrees in the Celsius scale.
Ah, I see. I have only seen it report change of values in the VALUE field, but
not in the RAW VALUE fielt, and VALUE is normalized.
Oct 30 21:35:22 tesla00 smartd[3843]: Device: /dev/sda, SMART Usage Attribute:
194 Temperature_Celsius changed from 114 to 115
versus
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
194 Temperature_Celsius 0x0022 114 104 000 Old_age Always
- 33
Regards,
Matthias
--
Matthias Bach
www.marix.org
--
To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse+help@opensuse.org
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic