[prev in list] [next in list] [prev in thread] [next in thread]
List: opensolaris-storage-discuss
Subject: Re: [storage-discuss] QLE2460, mpathadm and OpenSolaris
From: Milos Muzik <Milos.Muzik () Sun ! COM>
Date: 2009-12-18 9:33:44
Message-ID: 4B2B4C78.3020501 () sun ! com
[Download RAW message or body]
Hi Corina,
do you have multipathing enabled?
mpathadm is a multipathing tool. Since you can see the LUNs using luxadm and
format I would I assume your card works well.
See this doc for more info on multipathing
http://docs.sun.com/app/docs/doc/820-3070
Regards,
Milos
corina wrote:
> Hi,
>
> I have a Qlogic 2460 single port connected to a Brocade switch and then to a \
> Clariion CX4. The card driver was installed successfully.
> I am not able to see any LUNs using mpathadm.
>
> 1. Is this card supported in OpenSolaris?
> 2. If so, are there any specific settings that need to be done on the client side?
>
> The LUNs are assigned to the storage. On the host side, I can see the LUNs with \
> luxadm and format, but mpathadm list lu does not return anything.
> 3. Do you know of any specific entry in any config file that might be missing ?
>
> Thank you,
> Corina.
_______________________________________________
storage-discuss mailing list
storage-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic