[prev in list] [next in list] [prev in thread] [next in thread] 

List:       opensolaris-help
Subject:    [osol-help] Re: Marvell Yukon Ethernet driver
From:       Nino <npeshic () yahoo ! com>
Date:       2007-02-28 15:43:37
Message-ID: 356060.1172706267992.JavaMail.Twebapp () oss-app1
[Download RAW message or body]

This is what happens:
# ifconfig skge0 down
# ifconfig skge0 dhcp
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
skge0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 2
        inet xxx.xxx.xxx.216 netmask fffffc00 broadcast xxx.xxx.xxx.255
        ether 0:14:85:85:22:27

and although ip address above (inet, broadcast) is properly assigned, neither ping \
nor the browser can access anything on the internet. After:
# touch /etc/dhcp.skge0

and after rebooting with init 6,
skge is not active again:

# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
 
 
This message posted from opensolaris.org
_______________________________________________
opensolaris-help mailing list
opensolaris-help@opensolaris.org


[prev in list] [next in list] [prev in thread] [next in thread] 

Configure | About | News | Add a list | Sponsored by KoreLogic