[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openocd-development
Subject:    [Openocd-development] [PATCH 4/5] CortexA8: Introduce Freescale
From:       Marek Vasut <marek.vasut () gmail ! com>
Date:       2010-10-31 6:41:46
Message-ID: 1288507307-26941-4-git-send-email-marek.vasut () gmail ! com
[Download RAW message or body]

This patch introduces support for Cortex A8 based Freescale i.MX51 CPU. This CPU
has the Debug Access Port located at a different address (0x60008000) than TI
OMAP3 series of CPUs.

i.MX51 configuration file based on OMAP3 configuration file and an email from
Alan Carvalho de Assis <acassis@gmail.com>.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 tcl/target/imx51.cfg |   52 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 52 insertions(+), 0 deletions(-)
 create mode 100644 tcl/target/imx51.cfg

diff --git a/tcl/target/imx51.cfg b/tcl/target/imx51.cfg
new file mode 100644
index 0000000..35d8a2c
--- /dev/null
+++ b/tcl/target/imx51.cfg
@@ -0,0 +1,52 @@
+# Freescale i.MX51
+
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
+   set  _CHIPNAME imx51
+}
+
+# CoreSight Debug Access Port
+if { [info exists DAP_TAPID ] } {
+   set _DAP_TAPID $DAP_TAPID
+} else {
+   set _DAP_TAPID 0x1ba00477
+}
+
+jtag newtap $_CHIPNAME DAP -irlen 4 -ircapture 0x1 -irmask 0xf \
+        -expected-id $_DAP_TAPID
+
+# SDMA / no IDCODE
+jtag newtap $_CHIPNAME SDMA -irlen 4 -ircapture 0x0 -irmask 0xf
+
+# SJC
+if { [info exists SJC_TAPID ] } {
+   set _SJC_TAPID SJC_TAPID
+} else {
+   set _SJC_TAPID 0x0190c01d
+}
+
+jtag newtap $_CHIPNAME SJC -irlen 5 -ircapture 0x1 -irmask 0x1f \
+        -expected-id $_SJC_TAPID -ignore-version
+
+# GDB target:  Cortex-A8, using DAP
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_a8 -chain-position $_CHIPNAME.DAP \
+	-variant imx51
+
+# some TCK tycles are required to activate the DEBUG power domain
+jtag configure $_CHIPNAME.SJC -event post-reset "runtest 100"
+
+# have the DAP "always" be active
+jtag configure $_CHIPNAME.SJC -event setup "jtag tapenable $_CHIPNAME.DAP"
+
+proc imx51_dbginit {target} {
+     # General Cortex A8 debug initialisation
+     cortex_a8 dbginit
+}
+
+# Slow speed to be sure it will work
+jtag_rclk 1000
+$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 }
+
+$_TARGETNAME configure -event reset-assert-post "imx51_dbginit $_TARGETNAME"
-- 
1.7.2.3

_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
[prev in list] [next in list] [prev in thread] [next in thread]