[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openocd-development
Subject:    [Openocd-development] Warn: not enough working area...
From:       lundin () mlu ! mine ! nu (Magnus Lundin)
Date:       2009-04-29 18:09:21
Message-ID: 49F897D1.7080907 () mlu ! mine ! nu
[Download RAW message or body]

Gene Smith wrote:
> When I load my program and it burns to flash I see this the first time:
>
> Warn : not enough working area available(requested 16384, free 16336)
>   
This warning is expected, the flash program uses 48 bytes for the flash 
algorith.
> Then on subsequent loads I see:
>
> Warn : not enough working area available(requested 16384, free 8144)
>   
This looks strange, it should be like the previous every time.
> This is using stm32.cfg which as -work-area-size 16384
>
> If I increase the size by 1K the warning does not occur. Is this warning 
>   to be expected ?
>
> -gene
>
>
>
>
> _______________________________________________
> Openocd-development mailing list
> Openocd-development at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/openocd-development
>   
Regards,
Magnus



[prev in list] [next in list] [prev in thread] [next in thread]