[prev in list] [next in list] [prev in thread] [next in thread] 

List:       opennms-discuss
Subject:    Re: [opennms-discuss] Alert notice for Cisco switches and UPS Overheat?
From:       Rod Ormon <Rod.Ormon () sjrb ! ca>
Date:       2015-07-29 15:14:48
Message-ID: CO1PR04MB441F1DC003310B899D788B6F98C0 () CO1PR04MB441 ! namprd04 ! prod ! outlook ! com
[Download RAW message or body]

Isn't this done for you already in the default Threshold configuration? (at least, \
for the switches!)

See the temperature settings here in /opennms/etc/thresholds.xml

        <group name="cisco"
                rrdRepository = "/opt/opennms/share/rrd/snmp/">
                <threshold type="high" ds-name="avgBusy5"  ds-type="node" ds-label="" \
value="80" rearm="50" trigger="3"/>  <threshold type="relativeChange" \
ds-name="cscoMemPoolUtl5Min"  ds-type="ciscoMemoryPoolType" \
ds-label="cscoMemoryPoolName" value="0.25" rearm="0.0" trigger="1"/>  <threshold \
type="high" ds-name="cvmTempStatusValue" ds-type="ciscoEnvMonTemperatureStatusIndex" \
ds-label="cvmTempStatusDescr" value="55.0" rearm="50.0" trigger="3"/>  <threshold \
type="relativeChange" ds-name="cvmTempStatusValue" \
ds-type="ciscoEnvMonTemperatureStatusIndex" ds-label="cvmTempStatusDescr" value="0.2" \
rearm="0.0" trigger="1"/>  </group>


OpenNMS collects from the CISCO-ENVMON-MIB by default. See the OIDs that are \
collected in /opennms/etc/datacollection/cisco.xml

If the MIB objects that you are interested in are not collected by default, you \
should be able to add them to the datacollection configs and set a threshold as \
appropriate.

Alternatively, the devices can be configured to send SNMP traps for the overheat \
conditions. You would have to make sure that the devices have your OpenNMS server set \
as the trap destination (and of course, verify that the appropriate MIB is loaded on \
OpenNMS.)

Rod



-----Original Message-----
From: Mike Xun Ma [mailto:Mike.Ma@concordia.ca] 
Sent: Wednesday, July 29, 2015 5:27 AM
To: opennms-discuss@lists.sourceforge.net
Subject: [opennms-discuss] Alert notice for Cisco switches and UPS Overheat?

I need to create notice and send alert email for overheat Cisco switches and UPS.
The system is OpenNMS v10.8 on Linux.

Please advise the related information.

Thanks a lot.

Mike

------------------------------------------------------------------------------
_______________________________________________
Please read the OpenNMS Mailing List FAQ:
http://www.opennms.org/index.php/Mailing_List_FAQ

opennms-discuss mailing list

To *unsubscribe* or change your subscription options, see the bottom of this page:
https://lists.sourceforge.net/lists/listinfo/opennms-discuss

------------------------------------------------------------------------------
_______________________________________________
Please read the OpenNMS Mailing List FAQ:
http://www.opennms.org/index.php/Mailing_List_FAQ

opennms-discuss mailing list

To *unsubscribe* or change your subscription options, see the bottom of this page:
https://lists.sourceforge.net/lists/listinfo/opennms-discuss


[prev in list] [next in list] [prev in thread] [next in thread]