[prev in list] [next in list] [prev in thread] [next in thread]
List: openmoko-devel
Subject: Re: why saveenv does not work?
From: Ruini Xue <xueruini () gmail ! com>
Date: 2009-03-26 15:12:25
Message-ID: 2bba2d6a0903260812j34fb9b63la13cfbd081c9f360 () mail ! gmail ! com
[Download RAW message or body]
On Thu, Mar 26, 2009 at 10:28 PM, Al Johnson
<openmoko@mazikeen.demon.co.uk> wrote:
> On Thursday 26 March 2009, Ruini Xue wrote:
>> I connect FR via /dev/ttyACM0, and modify some env variables
>> (bootdelay, boot_menu_timeout), and commit them with saveenv. Then I
>> poweroff it and reconnect to it on restart, but printenv shows that
>> these variables are not changed. What other commands should I run to
>> make these changes persistent?
>
> Make sure you're in NAND uboot (power then aux) not NOR (aux then power) as
> saveenv doesn't work with the NOR uboot.
>
Thanks, I've just fixed it. Hope this link is useful for others too:
http://wiki.openmoko.org/wiki/Boot
-- ruini
_______________________________________________
devel mailing list
devel@lists.openmoko.org
https://lists.openmoko.org/mailman/listinfo/devel
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic