[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openembedded-issues
Subject:    [oe-issues] [Bug 1621] New: Akita won't use TCP/IP-over-USB with WinXP
From:       bugzilla-daemon () tinman ! treke ! net (bugzilla-daemon at tinman ! treke ! net)
Date:       2006-11-26 7:18:20
Message-ID: 20061126071820.B709D401C9B () tinman ! treke ! net
[Download RAW message or body]

http://bugs.openembedded.org/show_bug.cgi?id=1621

           Summary: Akita won't use TCP/IP-over-USB with WinXP
           Product: Openembedded
           Version: OpenZaurus 3.5.4.x
          Platform: Other
        OS/Version: Linux
            Status: NEW
          Severity: normal
          Priority: P2
         Component: Distributions
        AssignedTo: openembedded-issues at lists.openembedded.org
        ReportedBy: armagon_ca at yahoo.ca
         QAContact: tinderbox-oe at gmx.net


Summary, (and additional notes):
--------------------------------

It is not possible to establish a TCP/IP-over-USB connection from a Sharp
Zaurus C1000 (Akita) to a PC running Windows XP.  

As I understand it, this also fails with the C3x00 models (and perhaps all
devices with a pxa27x processor), but does work with a the Sharp Zaurus C7x0
models.  

It should also be noted that the C1000 uses TCP/IP-over-USB with linux-based
PCs just fine.  [I don't suppose there's a place to file a bug report on
Microsoft's implementation of things?]


Steps To Reproduce:
-------------------

The steps to follow are here:
http://www.oesf.org/forums/index.php?showtopic=11785&view=findpost&p=119530

These steps detail how to establish a TCP/IP-over-USB connection between a
Zaurus (a C860, in this case), and Windows XP.  [These steps then link to a
graphical step-by-step explanation, which could not be reproduced here.]


Expect Results:
---------------

The same steps that work for the Sharp Zaurus C860 should work for the C1000
and later clamshells.

Actual Results:
---------------

When the Windows driver is nearly installed, and you are on the "Please wait
while the wizard installs the software..." dialog [step 11 in the graphical
step-by-step instructions], the three buttons "Back", "Next", and "Cancel"
remain greyed out and the animation of a file copying continues playing
indefinitely.  Windows never gets past this step.

In short, the driver does not completely install.

[This was noted a couple of posts later in that thread I linked to,
specifically in replies 27, 28, and 29.]


-- 
Configure bugmail: http://bugs.openembedded.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.



[prev in list] [next in list] [prev in thread] [next in thread]