[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openembedded-core
Subject:    [OE-core] [OE-Core][RFC 1/2] qemuarm64: fix hvc0 error and cleanup
From:       Jon Mason <jdmason () kudzu ! us>
Date:       2019-02-28 4:15:40
Message-ID: 20190228041541.14628-2-jdmason () kudzu ! us
[Download RAW message or body]

The following error is being frequently posted
INIT: Id "hvc0" respawning too fast: disabled for 5 minutes

Remove the references to hvc0 to work around this error.  Also, add some
comments to describe what is going on.

Signed-off-by: Jon Mason <jdmason@kudzu.us>
---
 meta/conf/machine/qemuarm64.conf | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/meta/conf/machine/qemuarm64.conf b/meta/conf/machine/qemuarm64.conf
index ee19385eaf..8d4a482fec 100644
--- a/meta/conf/machine/qemuarm64.conf
+++ b/meta/conf/machine/qemuarm64.conf
@@ -7,20 +7,23 @@ require conf/machine/include/qemu.inc
 
 KERNEL_IMAGETYPE = "Image"
 
-SERIAL_CONSOLES ?= "38400;ttyAMA0 38400;hvc0"
+SERIAL_CONSOLES ?= "115200;ttyAMA0 115200;tty1"
 
 # For runqemu
 QB_SYSTEM_NAME = "qemu-system-aarch64"
 QB_MEM = "-m 512"
 QB_MACHINE = "-machine virt"
 QB_CPU = "-cpu cortex-a57"
-QB_KERNEL_CMDLINE_APPEND = "console=ttyAMA0,38400"
-# Add the 'virtio-rng-pci' device otherwise the guest may run out of entropy
+# We need both ttyAMA0 and tty1 to allow for this to work in the stdio mode or the \
normal mode +QB_KERNEL_CMDLINE_APPEND = "console=ttyAMA0 console=tty1"
 QB_OPT_APPEND = "-show-cursor -monitor null"
 # Add the 'virtio-rng-pci' device otherwise the guest may run out of entropy
 QB_OPT_APPEND += "-object rng-random,filename=/dev/urandom,id=rng0 -device \
virtio-rng-pci,rng=rng0" +# Virtio Networking support
 QB_TAP_OPT = "-netdev tap,id=net0,ifname=@TAP@,script=no,downscript=no"
 QB_NETWORK_DEVICE = "-device virtio-net-device,netdev=net0,mac=@MAC@"
+# Virtio block device
 QB_ROOTFS_OPT = "-drive id=disk0,file=@ROOTFS@,if=none,format=raw -device \
                virtio-blk-device,drive=disk0"
-QB_SERIAL_OPT = "-device virtio-serial-device -chardev null,id=virtcon -device \
                virtconsole,chardev=virtcon"
-QB_TCPSERIAL_OPT = " -device virtio-serial-device -chardev \
socket,id=virtcon,port=@PORT@,host=127.0.0.1 -device virtconsole,chardev=virtcon" +# \
Virtio serial console +QB_SERIAL_OPT = "-device virtio-serial-device -chardev \
vc,id=virtcon -device virtconsole,chardev=virtcon" +QB_TCPSERIAL_OPT = "-device \
virtio-serial-device -chardev socket,id=virtcon,port=@PORT@,host=127.0.0.1 -device \
                virtconsole,chardev=virtcon"
-- 
2.17.2

-- 
_______________________________________________
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core


[prev in list] [next in list] [prev in thread] [next in thread]