[prev in list] [next in list] [prev in thread] [next in thread]
List: openembedded-core
Subject: [OE-core] [PATCH][RFC][WIP 3/6] feature-arm-thumb.inc: respect ARM_INSTRUCTION_SET when adding thumb
From: martin.jansa () gmail ! com (Martin Jansa)
Date: 2014-01-31 19:03:20
Message-ID: 20140131190320.GY3718 () jama
[Download RAW message or body]
On Fri, Jan 31, 2014 at 07:46:45PM +0100, Martin Jansa wrote:
> On Fri, Jan 31, 2014 at 06:38:00PM +0100, Martin Jansa wrote:
> > On Wed, Jan 22, 2014 at 01:36:08AM +0100, Martin Jansa wrote:
> > > * this means that recipes with ARM_INSTRUCTION_SET explicitly changed
> > > to arm will be built in feed without thumb suffix
> > > * I'm not sure if the rest of system correctly supports different
> > > TUNE_PKGARCHs for different recipes, this is one of the reasons why
> > > this is WIP/RFC
> > >
> > > Signed-off-by: Martin Jansa <Martin.Jansa at gmail.com>
> > > ---
> > > meta/conf/machine/include/arm/feature-arm-thumb.inc | 17 +++++++++++------
> > > 1 file changed, 11 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/meta/conf/machine/include/arm/feature-arm-thumb.inc \
> > > b/meta/conf/machine/include/arm/feature-arm-thumb.inc index d58c4b4..09a127a \
> > > 100644
> > > --- a/meta/conf/machine/include/arm/feature-arm-thumb.inc
> > > +++ b/meta/conf/machine/include/arm/feature-arm-thumb.inc
> > > @@ -5,14 +5,19 @@
> > > # but requires more instructions (140% for 70% smaller code) so may be
> > > # slower.
> > > TUNEVALID[thumb] = "Use thumb instructions instead of ARM"
> > > -ARM_THUMB_M_OPT = "${@['-marm', '-mthumb'][d.getVar('ARM_INSTRUCTION_SET', \
> > > True) == 'thumb']}"
> > > -TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'thumb', ' \
> > > ${ARM_THUMB_M_OPT}', '', d)}" +ARM_THUMB_OPT = "${@['arm', \
> > > 'thumb'][d.getVar('ARM_INSTRUCTION_SET', True) == 'thumb']}" +ARM_THUMB_SUFFIX \
> > > .= "${@bb.utils.contains('TUNE_FEATURES', 'armv4', 't', '', d)}" \
> > > +ARM_THUMB_SUFFIX .= "${@bb.utils.contains('TUNE_FEATURES', 'armv5', 't', '', \
> > > d)}" +ARM_THUMB_SUFFIX .= "${@bb.utils.contains('TUNE_FEATURES', 'armv6', 't', \
> > > '', d)}" +ARM_THUMB_SUFFIX .= "${@bb.utils.contains('TUNE_FEATURES', 'armv7a', \
> > > 't2', '', d)}" +ARM_THUMB_SUFFIX .= "${@bb.utils.contains('TUNE_FEATURES', \
> > > 'armv7r', 't2', '', d)}" +ARM_THUMB_SUFFIX .= \
> > > "${@bb.utils.contains('TUNE_FEATURES', 'armv7m', 't2', '', d)}" +
> > > +TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'thumb', ' \
> > > -m${ARM_THUMB_OPT}', '', d)}" OVERRIDES .= \
> > > "${@bb.utils.contains('TUNE_FEATURES', 'thumb', ':thumb', '', d)}"
> > > -ARMPKGSFX_THUMB .= "${@bb.utils.contains('TUNE_FEATURES', [ 'armv4', 'thumb' \
> > > ], 't', '', d)}"
> > > -ARMPKGSFX_THUMB .= "${@bb.utils.contains('TUNE_FEATURES', [ 'armv5', 'thumb' \
> > > ], 't', '', d)}"
> > > -ARMPKGSFX_THUMB .= "${@bb.utils.contains('TUNE_FEATURES', [ 'armv6', 'thumb' \
> > > ], 't', '', d)}"
> > > -ARMPKGSFX_THUMB .= "${@bb.utils.contains('TUNE_FEATURES', [ 'armv7a', 'thumb' \
> > > ], 't2', '', d)}" +# Add suffix from ARM_THUMB_SUFFIX only if after all this we \
> > > still set ARM_THUMB_OPT to thumb +ARMPKGSFX_THUMB .= "${@ \
> > > d.getVar('ARM_THUMB_SUFFIX', True) if d.getVar('ARM_THUMB_OPT', True) == \
> > > 'thumb'] else ''}"
> >
> > In branch I've removed extra ']' in this line and moved this patch as
> > last in series, because it's really not ready for merge (eglibc-initial
> > fails).
>
> Ah, there was another issue in 4/6 and "arm" TUNE_FEATURE wasn't
> inherited by higher architectures, so it was correctly forcing "thumb"
> mode - that's why eglibc-initial was failing and now it isn't.
OMG sorry for noise, yes there is still problem when missing thumb and
arm builds for the same machine with different PKGARCH and
eglibc-initial still fails
> checking build system type... x86_64-pc-linux-gnu
> checking host system type... arm-oe-linux-gnueabi
> checking for arm-oe-linux-gnueabi-gcc... arm-oe-linux-gnueabi-gcc -march=armv5e \
> -marm -mthumb-interwork --sysroot=/OE/build/oe-core/tmp-eglibc/sysroots/qemuarm
> checking for suffix of object files... configure: error: in \
> `/OE/build/oe-core/tmp-eglibc/work/armv5e-oe-linux-gnueabi/eglibc-initial/2.18-r0/build-arm-oe-linux-gnueabi':
>
> configure: error: cannot compute suffix of object files: cannot compile
> See `config.log' for more details
> WARNING: /OE/build/oe-core/tmp-eglibc/work/armv5e-oe-linux-gnueabi/eglibc-initial/2.18-r0/temp/run.do_configure.3925:1 \
> exit 1 from
> /OE/build/oe-core/tmp-eglibc/work/armv5e-oe-linux-gnueabi/eglibc-initial/2.18-r0/eglibc-2.18/libc/configure \
> --host=arm-oe-linux-gnueabi --build=x86_64-linux --prefix=/usr --without-cvs \
> --disable-sanity-checks \
> --with-headers=/OE/build/oe-core/tmp-eglibc/sysroots/qemuarm/usr/include \
> --with-kconfig=/OE/build/oe-core/tmp-eglibc/sysroots/x86_64-linux/usr/bin \
> --enable-hacker-mode --enable-addons
config.log:
configure:2768: arm-oe-linux-gnueabi-gcc -march=armv5e -marm -mthumb-interwork \
--sysroot=/OE/build/oe-core/tmp-eglibc/sysroots/qemuarm -c -O2 -pipe -g \
-feliminate-unused-debug-types conftest.c >&5
/OE/build/oe-core/tmp-eglibc/work/armv5e-oe-linux-gnueabi/eglibc-initial/2.18-r0/eglibc-2.18/libc/configure: \
line 2770: arm-oe-linux-gnueabi-gcc: command not found configure:2772: $? = 127
and the problem is basically that STAGING_BINDIR_TOOLCHAIN points to
different directory when building recipe with thumb enabled and
disabled, in this case gcc was built with thumb enabled and is installed
in:
sysroots/x86_64-linux/usr/bin/armv5te-oe-linux-gnueabi
OE qemuarm@ ~/build/oe-core $ ls \
/OE/build/oe-core/tmp-eglibc/sysroots/x86_64-linux/usr/bin/armv5te-oe-linux-gnueabi \
arm-oe-linux-gnueabi-addr2line arm-oe-linux-gnueabi-elfedit arm-oe-linux-gnueabi-nm \
arm-oe-linux-gnueabi-readelf arm-oe-linux-gnueabi-ar \
arm-oe-linux-gnueabi-gprof arm-oe-linux-gnueabi-objcopy arm-oe-linux-gnueabi-size
arm-oe-linux-gnueabi-as arm-oe-linux-gnueabi-ld
arm-oe-linux-gnueabi-objdump arm-oe-linux-gnueabi-strings
arm-oe-linux-gnueabi-c++filt arm-oe-linux-gnueabi-ld.bfd
arm-oe-linux-gnueabi-ranlib arm-oe-linux-gnueabi-strip
but when building eglibc-initial with thumb disalbed, TUNE_PKGARCH
becames armv5e and STAGING_BINDIR_TOOLCHAIN in PATH points to wrong dir:
# $STAGING_BINDIR_TOOLCHAIN
# set conf/bitbake.conf:354
# "${STAGING_DIR_NATIVE}${bindir_native}/${TUNE_PKGARCH}${TARGET_VENDOR}-${TARGET_OS}"
STAGING_BINDIR_TOOLCHAIN="/OE/build/oe-core/tmp-eglibc/sysroots/x86_64-linux/usr/bin/armv5e-oe-linux-gnueabi"
OE qemuarm@ ~/build/oe-core $ ls \
/OE/build/oe-core/tmp-eglibc/sysroots/x86_64-linux/usr/bin/armv5e-oe-linux-gnueabi
ls: cannot access /OE/build/oe-core/tmp-eglibc/sysroots/x86_64-linux/usr/bin/armv5e-oe-linux-gnueabi: \
No such file or directory
Any idea how to resolve this correctly?
--
Martin 'JaMa' Jansa jabber: Martin.Jansa at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.openembedded.org/pipermail/openembedded-core/attachments/20140131/e00c076a/attachment-0001.sig>
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic