[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openbsd-tech
Subject:    Large capacity IDE drives
From:       "Gregory Perry" <Gregory.Perry () netsec ! net>
Date:       1999-04-28 20:36:26
[Download RAW message or body]

Ok after another install, I don't get a kernel panic but I am having some issues with \
drive geometry I think.

OpenBSD -current, Pentium II 233, 128 megs of memory, Maxtor 10 gig EIDE hard drive, \
BIOS set for LBA mode.  For some reason OpenBSD is incorrectly reporting a hard drive \
size of 9728 megs; also, on every reboot the OS complains about the root partition \
not being unmounted properly (even though the machine was gracefully rebooted after \
two sync's).

dmesg output:
 
OpenBSD 2.5 (GENERIC) #243: Fri Apr 16 09:16:34 MDT 1999
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 234 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,MMX
BIOS mem  = 654336 conventional, 133169152 extended
real mem  = 133824512
avail mem = 121384960
using 1659 buffers containing 6795264 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(d2) BIOS, date 10/24/97
bios0: diskinfo 0xf049d00c cksumlen 1 memmap 0xf049d088 apminfo 0xf049d10c
apm0 at bios0: Power Management spec V1.1
apm0: AC on, no battery
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443LX PCI-AGP (PAC)" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443LX AGP (PAC)" rev 0x03
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
"Intel 82371AB IDE (PIIX4)" rev 0x01 at pci0 dev 7 function 1 not configured
"Intel 82371AB USB Host (PIIX4)" rev 0x01 at pci0 dev 7 function 2 not configure
d
"Intel 82371AB Power Management (PIIX4)" rev 0x01 at pci0 dev 7 function 3 not c
onfigured
"S3 ViRGE DX/GX" rev 0x01 at pci0 dev 9 function 0 not configured
fxp0 at pci0 dev 10 function 0 "Intel 82557" rev 0x05: irq 9, address 00:a0:c9:d
b:53:c7
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci0 dev 11 function 0 "Intel 82557" rev 0x05: irq 5, address 00:a0:c9:d
b:8b:21
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 0
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2 at pci0 dev 12 function 0 "Intel 82557" rev 0x05: irq 11, address 00:a0:c9:
db:90:30
inphy2 at fxp2 phy 1: i82555 10/100 media interface, rev. 0
inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at mainbus0
isadma0 at isa0
wdc0 at isa0 port 0x1f0-0x1f7 irq 14 
atapibus0 at wdc0
wd0 at wdc0 drive 0: <Maxtor 91020D6>
wd0: 9728MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sec, 19923120 sec total
wd0: using 16-sector 16-bit pio transfers, lba addressing (512KB cache)
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378-0x37b irq 7
npx0 at isa0 port 0xf0-0xff: using exception 16
pccom0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60-0x6f irq 1: unknown S3, 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0-0x3f5 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4040 netmask 4a60 ttymask 5ae2
root on wd0a
pctr: 686-class user-level performance counters enabled
dkcsum: wd0 matched BIOS disk 80
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted 

disklabel output:

# /dev/rwd0a:
type: ESDI
disk: ESDI/IDE disk
label: Maxtor 91020D6
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 16383
total sectors: 19923120
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0           # milliseconds
track-to-track seek: 0  # milliseconds
drivedata: 0

16 partitions:
#        size   offset    fstype   [fsize bsize   cpg]
  a:  2097648       63    4.2BSD     1024  8192    16   # (Cyl.    0*- 2081*)
  b:   524160  2097711      swap                        # (Cyl. 2081*- 2601*)
  c: 19923120        0    unused        0     0         # (Cyl.    0 - 19764)
  d:  4194288  2621871    4.2BSD     1024  8192    16   # (Cyl. 2601*- 6762*)
  e:  1048320  6816159    4.2BSD     1024  8192    16   # (Cyl. 6762*- 7802*)
  f:  4194288  7864479    4.2BSD     1024  8192    16   # (Cyl. 7802*- 11963*)
  g:  7864353 12058767    4.2BSD     1024  8192    16   # (Cyl. 11963*- 19764) 
                                         
                                         
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Gregory Perry                         %%
%% Network  Security  Technologies, Inc. %%
%% V: 703.561.0420 x115  F: 703.561.0426 %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

This electronic message contains information from Network Security Technologies, Inc. \
or affiliates, which may be confidential, proprietary, or otherwise protected from \
disclosure.  The information is intended for use solely by the recipient(s) named \
above for the purpose intended by the originator.  If you are not an intended \
recipient, be aware that any review, disclosure, copying, distribution, or use of \
this transmission or its contents is prohibited.  If you have received this \
transmission in error, please notify us immediately by telephone at (703) 561-0420 or \
by electronic mail at sales@netsec.net.


[prev in list] [next in list] [prev in thread] [next in thread]