[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openbsd-sparc
Subject:    reboot loop with 3.9-beta
From:       Serge Basterot <serge () gakoz ! net>
Date:       2006-02-28 13:00:24
Message-ID: 44044968.5020908 () gakoz ! net
[Download RAW message or body]

Hello,

Trying to upgrade a 3.7-stable based ss20 to last snapshot with 
bsd.rd, the boot process enter in a loop :

ok boot bsd.rd
SPARCstation 20 (1 X RT626), No Keyboard
ROM Rev. 2.25, 512 MB memory installed, Serial #8018414.
Ethernet address 8:0:20:7a:59:ee, Host ID: 727a59ee.



Initializing Memory

Rebooting with command: bsd.rd
Boot device: /iommu/sbus/espdma@f,400000/esp@f,800000/sd@1,0:a  File 
and args: bsd.rd
 >> OpenBSD BOOT 2.2
Booting bsd.rd @ 0x4000
3405928+200376
console is ttya
Copyright (c) 1982, 1986, 1989, 1991, 1993
         The Regents of the University of California.  All rights 
reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved. 
http://www.OpenBSD.org
 

OpenBSD 3.9-beta (RAMDISK) #254: Thu Feb 23 07:03:39 MST 2006
     deraadt@sparc.openbsd.org:/usr/src/sys/arch/sparc/compile/RAMDISK
real mem = 536391680
avail mem = 498888704
using 200 buffers containing 13107200 bytes of memory
bootpath: 
/iommu@f,e0000000/sbus@f,e0001000/espdma@f,400000/esp@f,800000/sd@1,0
mainbus0 (root): SUNW,SPARCstation-20 

cpu0 at mainbus0: RT620/625 @ 150 MHz, on-chip FPU
cpu0: 512K byte write-back, 32 bytes/line, sw flush cache enabled
obio0 at mainbus0
clock0 at obio0 addr 0xf1200000: mk48t08 (eeprom)
timer0 at obio0 addr 0xf1300000 delay constant 73
zs0 at obio0 addr 0xf1100000 pri 12, softpri 6
zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
zs1 at obio0 addr 0xf1000000 pri 12, softpri 6
zskbd0 at zs1 channel 0: no keyboard
zstty2 at zs1 channel 1: mouse
fdc0 at obio0 addr 0xf1700000 pri 11, softpri 4: chip 82077
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
auxreg0 at obio0 addr 0xf1800000
power0 at obio0 addr 0xf1a01000
iommu0 at mainbus0 ioaddr 0xe0000000: version 0x3/0x1, page-size 4096, 
range 64MB
sbus0 at iommu0: clock = 25 MHz
dma0 at sbus0 slot 15 offset 0x400000: rev 2
esp0 at dma0 offset 0x800000 pri 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
sd0 at scsibus0 targ 1 lun 0: <IBM, DCAS32160SUN2.1G, S60B> SCSI2 
0/direct fixed
sd0: 2063MB, 8188 cyl, 3 head, 172 sec, 512 bytes/sec, 4226725 sec 
total
sd1 at scsibus0 targ 3 lun 0: <SEAGATE, ST32155W SUN2.1G, 8826> SCSI2 
0/direct f
ixed
sd1: 2049MB, 4177 cyl, 8 head, 125 sec, 512 bytes/sec, 4197405 sec total
cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, XM-5401TASUN4XCD, 1036> SCSI2 
5/cdrom re
movable
ledma0 at sbus0 slot 15 offset 0x400010: rev 2
le0 at ledma0 offset 0xc00000 pri 6: address 08:00:20:7a:59:ee
le0: 16 receive buffers, 4 transmit buffers
SUNW,bpp at sbus0 slot 15 offset 0x4800000 not configured
SUNW,DBRIe at sbus0 slot 14 offset 0x10000 not configured
cgsix0 at sbus0 slot 2 offset 0x0: SUNW,501-2325, 1152x900, rev 11
wsdisplay0 at cgsix0
wsdisplay0: screen 0 added (std, sun emulation)
root on rd0a
rd0: fixed, 4352 blocks
rootdev=0x1100 rrootdev=0x6a00 rawdev=0x6a02
kernel mapping failed 12
panic: init died (signal 6, exit 0)
syncing disks... done
Frame pointer is at 0xfbfeba80
Call traceback:
   pc = 0xf80e2c14  args = (0xf8343800, 0x1e000fe3, 0xf8343400, 0x0, 
0xfbfebb98, 0x0, 0xfbfebae8) fp = 0xfbfebae8
   pc = 0xf8033068  args = (0x100, 0xf8119c00, 0x1, 0xfbfebc00, 
0xfbfebbec, 0xffffffff, 0xfbfebb50) fp = 0xfbfebb50
   pc = 0xf8021964  args = (0xf80f3268, 0xfbfebc00, 0x100, 0xf835f710, 
0x3f, 0xf8372000, 0xfbfebbb8) fp = 0xfbfebbb8
   pc = 0xf8021600  args = (0xfaf48000, 0x6, 0x1, 0xfbfebf30, 
0xf80e272c, 0xfbbda000, 0xfbfebc20) fp = 0xfbfebc20
   pc = 0xf801c830  args = (0x0, 0x0, 0xf8343000, 0x0, 0xfbfebf30, 
0x0, 0xfbfebea8) fp = 0xfbfebea8
   pc = 0xf8009ed4  args = (0xfaf48000, 0x8, 0x1, 0xf8c76d00, 
0x382910, 0x2c, 0xfbfebf50) fp = 0xfbfebf50
   pc = 0x0  args = (0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0) fp = 0x0
rebooting

Is it a known issue or did I miss something ?

Thanks,

-- 
Serge

[prev in list] [next in list] [prev in thread] [next in thread]