[prev in list] [next in list] [prev in thread] [next in thread]
List: openbsd-sparc
Subject: IDE problems with OpenBSD 3.7
From: "Matthias Schreiber" <compeiler () gmx ! net>
Date: 2005-06-03 19:18:27
Message-ID: 1107.1117826307 () www82 ! gmx ! net
[Download RAW message or body]
Hi!
Yesterday I installed OpenBSD 3.7. Now I encounter problems with my IDE
drives. I have an Ultra 60, two IDE Promise Controller Ultra TX 100 and two
120 GB Seagate drives (one on each controller).
With OpenBSD 3.6 until the day before yesterday I haven't had no problems.
Now it looks like that: I want to have access to the drive wd1 and it
results in tons of "missing interrupt" errors.
But sometimes it worked to mount at least a filesystem of that drive. And I
had yet access to the data in that filesystem. But it is very unstable.
Untill now I have no problems with wd0 on the other controller.
I could hardly believe that the controller just failed when I installed 3.7
(neither moved the Ultra60 nor opened it)!
I hope there is just a bug or a solution to my problems. So please help ;-)
1. infos to my system:
root # uname -a
OpenBSD 3.7 GENERIC#431 sparc64
root # dmesg | grep "^wd"
wd0 at pciide0 channel 0 drive 0: <ST3120026A>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <ST3120026A>
wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
2. problem
root@ / # newfs /dev/wd1d
newfs: /dev/wd1d: not a character-special device
Warning: cylinder groups must have a multiple of 2 cylinders
Warning: 3952 sector(s) in last cylinder unallocated
/dev/wd1d: 1044224 sectors in 261 cylinders of 63 tracks, 63 sectors
509.9MB in 4 cyl groups (66 c/g, 129.42MB/g, 16384 i/g)
super-block backups (for fsck -b #) at:
32, 265152, 530272, 795392,
wd1(pciide0:1:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:1:0: bus-master DMA error: missing interrupt, status=0x21
wd1d: device timeout reading fsbn 4224 of 4224-4255 (wd1 bn 5241414; cn 326
tn 6
7 sn 3), retrying
wd1(pciide0:1:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:1:0: bus-master DMA error: missing interrupt, status=0x21
wd1d: device timeout reading fsbn 4224 of 4224-4255 (wd1 bn 5241414; cn 326
tn 6
7 sn 3), retrying
wd1(pciide0:1:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:1:0: bus-master DMA error: missing interrupt, status=0x21
wd1d: device timeout reading fsbn 4224 of 4224-4255 (wd1 bn 5241414; cn 326
tn 6
7 sn 3), retrying
wd1(pciide0:1:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:1:0: bus-master DMA error: missing interrupt, status=0x21
wd1d: device timeout reading fsbn 4224 of 4224-4255 (wd1 bn 5241414; cn 326
tn 6
7 sn 3), retrying
wd1(pciide0:1:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
wd1d: device timeout reading fsbn 4224 of 4224-4255 (wd1 bn 5241414; cn 326
tn 6
7 sn 3), retrying
wd1(pciide0:1:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
wd1d: device timeout reading fsbn 4224 of 4224-4255 (wd1 bn 5241414; cn 326
tn 6
7 sn 3)
newfs: wtfs: write error on block 4224: Input/output error
If more information is needed I will send them...
Thanks,
Matthias
--
Weitersagen: GMX DSL-Flatrates mit Tempo-Garantie!
Ab 4,99 Euro/Monat: http://www.gmx.net/de/go/dsl
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic