[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openbsd-ppc
Subject:    Re: xorg.conf, blue and white g3
From:       Neil Hughes <nkhughes () inbox ! com>
Date:       2009-05-14 19:50:28
Message-ID: 4A0C7604.8070703 () inbox ! com
[Download RAW message or body]

Michael Lazin wrote:
> Hi, I am trying to configure x on my blue and white g3 with an ati rage
> 128.  I had it working at low resolution, and then replaced my xorg.conf
> with the xorg.conf from
> http://www.openbsd.org/cgi-bin/cvsweb/~checkout~/xenocara/distrib/notes/README.macppc
> and now it no longer works.  Could someone post a working xorg.conf for this
> hardware?

I haven't updated my B&W since 3.9...but if it's any help I've attached 
the xorg.conf I used for that, driving a Sony CRT at 1024x768.

-- 
Neil Hughes
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "glx"
	Load  "record"
	Load  "xtrap"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "wsmouse"
	Option	    "Device" "/dev/wsmouse"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
	HorizSync    30-107
	VertRefresh  48-120
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "Display"            	# <str>
        #Option     "PanelWidth"         	# <i>
        #Option     "PanelHeight"        	# <i>
        #Option     "ProgramFPRegs"      	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "ShowCache"          	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
	Identifier  "Card0"
	Driver      "ati"
	VendorName  "ATI Technologies Inc"
	BoardName   "Rage 128 RE/SG"
	BusID       "PCI:0:16:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth 16
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes "1024x768" "1280x1024" 
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes "1024x768" "1280x1024"
	EndSubSection
EndSection

[prev in list] [next in list] [prev in thread] [next in thread]