[prev in list] [next in list] [prev in thread] [next in thread]
List: openbsd-ppc
Subject: Re: Panic on G4 with Adaptec 29160
From: Marco Peereboom <slash () peereboom ! us>
Date: 2004-02-16 3:00:29
Message-ID: 4710A3C0-602C-11D8-ACDC-000A95908CA4 () peereboom ! us
[Download RAW message or body]
I would really like to see the console output and the dmesg. Could you
try to get it and send it to the list?
Thanks!
/marco
On Feb 15, 2004, at 8:07 PM, Greg Thomas wrote:
> This is with 3.4 and the latest snapshot. I can't get a trace and ps
> because I lose the console. Please excuse any typos as this is
> handwritten since I don't have serial access.
>
> ahc0 at pci1 dev 18 function 0 "Adaptec AHA-29160 U160" rev 0x02
> panic: trap type 200 at 10f388 (ahc_intr_enable+0x24) lr 2521a4
> Stopped at Debugger+0x10! lwz r0,20(r1)
>
> At the bottom of my display I get a message starting with "method
> (set-contrast) not found" and I can't type anything into the ddb
> prompt.
>
> I rarely boot OpenBSD on this machine so it'll take some time to
> troubleshoot, i.e. full dmesg from 3.1 or without the SCSI card, if
> anyone is interested.
>
> I'd ignore the 29160 but I was hoping to be able to run pdisk on the
> two hard drives attached to it. I see in the hardware list that the
> 7899 can't handle more than one device at this point. I'm not that
> familiar with their chipsets so does the 29160 use the 7899 or the
> 7892? If the 7899 then that answers my question.
>
> Greg
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic