[prev in list] [next in list] [prev in thread] [next in thread]
List: openbsd-ppc
Subject: Re: Boot problem OpenBSD 3.1 MacPPC (PowerBook G4)
From: Maik Kuendig <maik () maik ! li>
Date: 2002-10-21 20:03:43
[Download RAW message or body]
Hallo
Dale Rahn <dalerahn@comcast.net> schrieb:
> [forwarded to ppc@ which is more relevant.]
> On Mon, Oct 21, 2002 at 02:32:13PM +0200, Maik Kuendig wrote:
> There is normally only one hard drive and it
> should be accessed as 'hd'.
-----8<-----
0> boot hd:,ofwboot /bsd can't OPEN hd:,ofwboot
ok
0> boot hd0:,ofwboot /bsd
# boots in to a bocken icon of a folder
----->8-----
> Boot from CD, enter the shell and send the output of 'pdisk wd0'
-----8<-----
# pdisk wd0
pdisk: can't open 'wd0'
# pdisk /dev/rwd0c
1: Apple_parition_map Apple 63 @ 1
2: Apple_Driver 43*Macintosh 56 @ 64
3: Apple_Driver 43*Macintosh 56 @ 120
4: Apple_Driver_ATA*Macintosh 56 @ 176
5: Apple_Driver_ATA*Macintosh 56 @ 232
6: Apple_FWDriver Macintosh 512 @ 288
7: Apple_Driver_IOKit Macintosh 512 @ 800
8: Apple_Patches Patch Partition 512 @ 1312
9: Apple_HFS osX 63853344 @ 1824 (30.4G)
10: OpenBSD OpenBSD 14284992 @ 63855168 (6.8G)
Device block size=512, Number of Blocks=78140160 (30.3G)
DeviceType=0x0, DeviceId=0x0
Drivers-
1: @ 64 for 23, type0x1
2: @ 120 for 36, type0xffff
3: @ 176 for 21, type0x701
4: @ 232 for 34, type0xf8ff
----->8-----
> and 'disklabel wd0' here. Are there any other disks in the machine?
-----8<-----
#disklabel wd0
# /dev/rwd0c:
type: ESDI
disk: ESDI/IDE disk
label: IBM-IC25N040ATCS
flags:
bytes/sector: 512
sector/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 16383
total sectors:78104160
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0
track-to-track seek: 0
drivedata: 0
16paritions:
a: 1047936 63855168 4.2BSD 1024 8192 16
b: 1048320 64903104 swap
c:
d: 4194228 65951425 4.2BSD 1024 8192 16
e: 1139040 70145712 4.2BSD 1024 8192 16
f: 6855405 71284752 4.2BSD 1024 8192 16
i: 63853344 1824 HFS
----->8-----
> > If I try it again, or with some other parameters I get some errors like:
> It is not possible to run the bootloader again without rebooting,
> this is an openfirmware limitation.
Thanks and best regards
Maik
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic