[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openbsd-pf
Subject:    Re: Proper Syntax for Limiting Ports per user group.
From:       Loic Cuguen <loic.cuguen () g2loq ! org>
Date:       2002-08-10 10:47:09
[Download RAW message or body]

you don't, the per group and user rules tag is only available on
-current.

so wait and see.

"Amir Seyavash Mesry" <amirm@lsil.com> writes:

> Can some one tell me what the proper syntax is for using the user &
> group parameters in OpenBSD 3.1 & PF.
> here is and example rule.
> pass out proto tcp from fxp0 port 33333 >< 55555 to any port 33333 ><
> 55555 modulate state
> pass out proto udp from fxp0 port 33333 >< 55555 to any port 33333 ><
> 55555
> 
> the user id is 1001 Group id is 1007, how do I limit those to rules to
> be used by those 2 id's?
>  
> Amir Seyavash Mesry
> amirm@lsil.com
> LSI Logic Corporation
> http://www.lsilogic.com/
> Raid Support Test Technician
> 6145-D Northbelt Parkway
> Norcross, GA 30071
> 678-728-1211
>  
> NOTICE: This communication may contain privileged or other 
> confidential information. If you are not the intended recipient, or
> believe that 
> you have received this communication in error, please do not print,
> copy, 
> retransmit, disseminate, or otherwise use the information. Also, please
> indicate 
> to the sender that you have received this communication in error, and
> delete the 
> copy you received. Thank you.
>  
>  
> 

-- 
Loïc

[prev in list] [next in list] [prev in thread] [next in thread]