[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openbsd-mobile
Subject:    OpenBSD-mobile: APM not working on Toshiba Satellite 200CDS
From:       Max <max () hinterhof ! net>
Date:       2000-10-29 2:41:23
[Download RAW message or body]

Hello,

my OpenBSD panics when trying to resume from a suspended Toshiba Satellite
200CDS (dmesg output appended).

After switching on the system I get the following messages:

Oct  3 14:08:58 movement /bsd: stray interrupt 3
wdc0:0:0: timeout waiting for DRQ; st=0x51, err=0x00
wd0a: device timeout writing fsbn 97312 of 97312-07327 (wd0 bin 97375; cn 48 tn 9 sn 40), retrying.
ne3: irq 3
wd0: soft error (corrected)
wdc0:0:0: read intr before drq.
wd0a: device timeout reading fsbn 590496 of 590496-590503 (wd0 bn 590559; cn 292 tn 29 sn 60), retrying
wd0: soft error (corrected)
panic: biodone already
Stopped at    _Debugger+0x4:   leave
ddb>

Before I installed OpenBSD the system was running Linux (2.0.36-2.2.14) and
APM worked perfectly fine. Can you give me a hint on where to start debugging?
Please keep in mind that Im quite new to OpenBSD :-)

Cheers
Max


OpenBSD 2.7 (GENERIC) #25: Sat May 13 18:04:26 MDT 2000
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 100 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
real mem  = 41725952 (40748K)
avail mem = 34045952 (33248K)
using 534 buffers containing 2187264 bytes (2136K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 09/20/96
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, charging, estimated 2:36 minutes
isa0 at mainbus0
isadma0 at isa0
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <ST9810AG>
wd0: can use 16-bit, PIO mode 4
wd0: 16-sector PIO, LBA, 773MB, 1572 cyl, 16 head, 63 sec, 1584968 sectors
wdc1 at isa0 port 0x170/8 irq 15
atapiscsi0 at wdc1 channel 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-1402B, 0186> SCSI0 5/cdrom removable
cd0: can use 16-bit, PIO mode 3
sb0 at isa0 port 0x220/24 irq 10 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
ne3 at pcmcia0 function 0 "Ethernet, Adapter, 2.0" port 0x340/16 irq 3
ne3: address 00:e0:98:85:70:05
pcmcia1 at pcic0 controller 0 socket 1
pcic0: irq 9
biomask c040 netmask c048 ttymask d2ca
pctr: 586-class performance counters and user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302


[prev in list] [next in list] [prev in thread] [next in thread]