[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openbsd-mobile
Subject:    OpenBSD-mobile: Tosh 1625CDT w/Xircom
From:       Dave Mangot <dave () mangot ! com>
Date:       2000-10-03 3:55:57
[Download RAW message or body]

Hey,

  I've got a Toshiba 1625CDT with a Xircom Realport Ethernet/Modem
card.  I'm trying to get it working.  (works in M$ Winderz).
When the machine boots and the card is in it just hangs.  If
I pop the card out it will continue booting.

  If I pop the card back in and bring it up with ifconfig I
get device timeouts.  Can anyone help me get started on
getting this working?  I'd like to update to current using
Ethernet if possible.

			Thanks,

				-Dave

dmesg:

OpenBSD 2.7 (ETHERFIRE) #0: Sun Sep  3 15:20:17 PDT 2000
    root@etherfire:/usr/src/sys/arch/i386/compile/ETHERFIRE
cpu0: AMD K6-2 ("AuthenticAMD" 586-class) 475 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
real mem  = 66629632 (65068K)
avail mem = 59289600 (57900K)
using 838 buffers containing 3432448 bytes (3352K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(73) BIOS, date 04/10/00
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 99%
apm0: AC off, battery charge high, estimated 3:18 minutes
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Acer Labs M1543 Host-PCI" rev 0x04
ppb0 at pci0 dev 1 function 0 "Acer Labs M5243 AGP/PCI-PCI" rev 0x04
pci1 at ppb0 bus 1
"ATI Technologies Mach64 LB" rev 0xdc at pci1 dev 0 function 0 not configured
"Texas Instruments PCI1225 PCI-CardBus" rev 0x01 at pci0 dev 4 function 0 not \
configured "Texas Instruments PCI1225 PCI-CardBus" rev 0x01 at pci0 dev 4 function 1 \
not configured pcib0 at pci0 dev 7 function 0 "Acer Labs M1543 PCI-ISA" rev 0x0a
vendor "Cirrus Logic", unknown product 0x6005 (class multimedia, subclass audio, rev \
0x01) at pci0 dev 8 function 0 not configured pciide0 at pci0 dev 15 function 0 "Acer \
Labs M5229 UDMA IDE" rev 0x20: DMA (unsupported), channel 0 configured to \
                compatibility, channel 1 configured to compatibility
pciide0: channel 0 ignored (other hardware responding at addresses)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
vendor "Rockwell Semiconductor Systems", unknown product 0x2013 (class \
communications, subclass miscellaneous, rev 0x01) at pci0 dev 16 function 0 not \
configured "Acer Labs M7101 Power Management" rev 0x09 at pci0 dev 17 function 0 not \
configured "Acer Labs M5237 USB" rev 0x03 at pci0 dev 19 function 0 not configured
isa0 at pcib0
isadma0 at isa0
> timeout in getresult
> timeout in getresult
> timeout in getresult
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <FUJITSU MHK2043AT>
wd0: can use 16-bit, PIO mode 4
wd0: 16-sector PIO, LBA, 4126MB, 8944 cyl, 15 head, 63 sec, 8452080 sectors
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 2> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia0: CIS version PC Card Standard 5.0
pcmcia0: CIS info: Xircom, CreditCard Ethernet 10/100 + Modem 56, CEM56, 1.00
pcmcia0: Manufacturer code 0x105, product 0x110a
pcmcia0: function 0: serial port, ccr addr ff80 mask 67
pcmcia0: function 0, config table entry 39: I/O card; irq mask 8ebc; iomask a, \
                iospace 2e8-2ef; powerdown
pcmcia0: function 0, config table entry 31: I/O card; irq mask 8ebc; iomask a, \
                iospace 3e8-3ef; io8 io16 powerdown
pcmcia0: function 0, config table entry 23: I/O card; irq mask 8ebc; iomask a, \
                iospace 2f8-2ff; io8 io16 powerdown
pcmcia0: function 0, config table entry 15: I/O card; irq mask 8ebc; iomask a, \
                iospace 3f8-3ff; io8 io16 powerdown
pcmcia0: function 0, config table entry 63: I/O card; irq mask 8ebc; iomask 3, \
                iospace 0-7; io8 io16 powerdown
pcmcia0: function 1: network adapter, ccr addr 0 mask 0
"Xircom, CreditCard Ethernet 10/100 + Modem 56, CEM56, 1.00" (manufacturer 0x105, \
product 0x110a) at pcmcia0 function 0 not configured xe0 at pcmcia0 function 1 \
"Xircom, CreditCard Ethernet 10/100 + Modem 56, CEM56" port 0x340/16 irq 3: address \
00:10:a4:a9:ae:cc icsphy0 at xe0 phy 0: ICS1890 10/100 media interface, rev. 3
pcmcia1 at pcic0 controller 0 socket 1
stray interrupt 9
stray interrupt 9
stray interrupt 9
stray interrupt 9
stray interrupt 9; stopped logging
pcic0: irq 9
biomask 4040 netmask 4048 ttymask 52ca
pctr: user-level cycle counter enabled
mtrr: K6-family MTRR support (2 registers)
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
clock: unknown CMOS layout
xe0: device timeout
xe0: device timeout

----- End forwarded message -----

-- 
"These are the same customers you are refering to whome (sic)
Microsoft thought would need MS Bob and the Talking Paperclip?
One thing is to give them enough rope to hang
themselves, but a boobietrapped thermonuclear weapon running on a
rand(time) countdown? Is that really wise?" -Terje Bless on BUGTRAQ

---
Dave Mangot - dave@mangot.com


[prev in list] [next in list] [prev in thread] [next in thread]