[prev in list] [next in list] [prev in thread] [next in thread]
List: openbsd-mobile
Subject: Re: OpenBSD-mobile: More on failed pc-card modems
From: Kevin Steves <stevesk () pobox ! com>
Date: 2001-09-22 17:16:31
[Download RAW message or body]
On Wed, 5 Sep 2001, Jim Rees wrote:
> Ok, I have more info.
>
> I know I'm not the only one having problems with pc-card modems. The
> symptom is that the modem is recognized, but falsely reported as having a
> 16450 uart instead of 16550 (which they all have). This can happen with
> almost any brand of modem. In fact, I have two different samples of the
> same model of Megahertz 1144 modem, one of which exhibits the problem, the
> other does not.
>
> The problem appears to be that 2.9 maps the devices to isa port base 0x23f8,
> where 2.8 used to map it to 0x3f8. I am guessing that the manufacturer of
> these cards got lazy and left out a couple of address lines. The pccom
> probe routine reads the IIR, which is all 0 because there isn't really
> anything mapped there, and assumes a 16450 uart.
>
> So how can I get my pc-card modems mapped at 0x3f8?
i don't know. as a datapoint, the following (an old motorola 28.8 from
around 1997) is working fine with -current:
pccom3 at pcmcia0 function 0 "Motorola, MONTANA V.34 FAX/MODEM, V2.0 !\^B\^B" port \
0x2f8/8: irq 3: ns16550a, 16 byte fifo
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic