[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openbsd-misc
Subject:    was 2.8 freeze
From:       Billy <_bil_ () mail ! ru>
Date:       2001-04-30 15:18:27
[Download RAW message or body]

as was mentioned in the thread 
i'v disabled i586 & i486 statements in kernel config
and left only i386
stange effect appeared
the mashine reboots whan i start to compile some prog....
after rebooting i'v found this in /var/log/messages
Apr 30 19:00:05 serv savecore: reboot after panic: trap
Apr 30 19:00:05 serv savecore: writing core to /var/crash/bsd.3.core
Apr 30 19:00:49 serv /bsd: wd0(pciide0:0:0): timeout
Apr 30 19:00:50 serv /bsd:      type: ata
Apr 30 19:00:50 serv /bsd:      c_bcount: 65536
Apr 30 19:00:50 serv /bsd:      c_skip: 0
Apr 30 19:00:50 serv /bsd: pciide0:0:0: device timeout, c_bcount=65536, c_skip0
Apr 30 19:00:50 serv /bsd: pciide0:0:0: Bus-Master DMA error: missing interrupt,
 status=0x21
Apr 30 19:00:50 serv /bsd: wd0a: device timeout writing fsbn 3447792 of 3447792-
3447919 (wd0 bn 3447855; cn 3420 tn 7 sn 54), retrying
Apr 30 19:00:50 serv /bsd: wd0: soft error (corrected)
Apr 30 19:00:50 serv savecore: writing kernel to /var/crash/bsd.3

my DMESG is
OpenBSD 2.8 (SERV) #0: Fri Apr 27 18:48:19 MSD 2001
    root@serv:/usr/src/sys/arch/i386/compile/SERV
cpu0: AMD K6 ("AuthenticAMD" 586-class)
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
NOTICE: this kernel does not support Pentium CPU class
NOTICE: this kernel does not support i486 CPU class
NOTICE: lowering CPU class to i386
real mem  = 66695168 (65132K)
avail mem = 59564032 (58168K)
using 839 buffers containing 3436544 bytes (3356K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(4e) BIOS, date 08/28/97, BIOS32 rev. 0 @ 0xfb2d0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 found at 0xf0000[0xb744]
pcibios0: PCI IRQ Routing Table rev. 1.0 found at 0xfdd10, size 112 bytes (5 entries)
pcibios0: PCI Interrupt Router at 000:00:0
pcibios0: PCI Exclusive IRQs: 0
pci_intr_fixup: no compatible PCI ICU found: ICU vendor 0x1106 product 0x0585
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA VT82C585 (Apollo) PCI-ISA" rev 0x23
pcib0 at pci0 dev 7 function 0 "VIA VT82C586 (Apollo VP) PCI-ISA" rev 0x27
pciide0 at pci0 dev 7 function 1 "VIA VT82C586A IDE" rev 0x06: DMA, channel 0 \
configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 \
                channel 0 drive 0: <WDC AC22000L>
wd0: can use 32-bit, PIO mode 4, DMA mode 2
wd0: 16-sector PIO, LBA, 1907MB, 3876 cyl, 16 head, 63 sec, 3907008 sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
"Trident TGUI 9440" rev 0xe3 at pci0 dev 8 function 0 not configured
isa0 at pcib0
isadma0 at isa0
ep0 at isa0 port 0x210/16 irq 10: address 00:20:af:46:00:9a, aui/bnc (default bnc)
ep1 at isa0 port 0x280/16 irq 11: address 00:20:af:53:92:73, aui/bnc (default bnc)
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
vt0 at isa0 port 0x60/16 irq 1: vga 80/132 col, color, 8 scr, mf2-kbd
isapnp0 at isa0 port 0x279: read port 0x203
ep2 at isapnp0 "3Com 3C509B EtherLink III, TCM5094, PNP80F7, " port 0x220/16 irq 3: \
address 00:a0:24:1e:fe:64, utp/aui/bnc (default utp) biomask 4000 netmask 4c08 \
                ttymask 4c0a
pctr: user-level cycle counter enabled
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
stray interrupt 7
wd0(pciide0:0:0): timeout
        type: ata
        c_bcount: 65536
        c_skip: 0
pciide0:0:0: device timeout, c_bcount=65536, c_skip0
pciide0:0:0: Bus-Master DMA error: missing interrupt, status=0x21
wd0a: device timeout writing fsbn 3447792 of 3447792-3447919 (wd0 bn 3447855; cn 3420 \
                tn 7 sn 54), retrying
wd0: soft error (corrected)


[prev in list] [next in list] [prev in thread] [next in thread] 

Configure | About | News | Add a list | Sponsored by KoreLogic