[prev in list] [next in list] [prev in thread] [next in thread]
List: openbsd-misc
Subject: Re: Samsung SSD X5 with OpenBSD - possible ?
From: Bryan Steele <brynet () gmail ! com>
Date: 2021-10-26 16:57:58
Message-ID: YXgzlpSTHayxMOjN () gmail ! com
[Download RAW message or body]
On Mon, Oct 25, 2021 at 07:11:15PM +0000, Laura Smith wrote:
>
> ------- Original Message -------
>
> On Monday, October 25th, 2021 at 19:15, Stefan Sperling <stsp@stsp.name> wrote:
>
> > On Mon, Oct 25, 2021 at 05:45:22PM +0000, Laura Smith wrote:
> >
> > > I'm struggling a bit as to what I need to do next here.
> > >
> > > Any time in the past I've connected a USB stick etc. to OpenBSD, everything \
> > > happened automagically in terms of recognition and assigning a /dev/sd.
> > > However this time, its different. This is the only line that appears in dmesg \
> > > when I plug it in:
> > > ugen0 at uhub0 port 4 "SAMSUNG ELECTRONICS CO., LTD Portable SSD X5" rev \
> > > 2.01/4.45 addr 2
> > > sysctl hw.disknames remains unchanged
> > >
> > > Any ideas ?
> >
> > I would guess that no driver is attaching because this drive requires
> >
> > Thunderbolt 3 rather than USB 3 (both use a USB-C type connector).
>
> Makes sense, thanks !
Could you send a full dmesg with the device connected, and also try
rebooting the machine with it still connected?
-Bryan.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic