[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openbsd-misc
Subject:    Sound problems
From:       Duncan Patton a Campbell <campbell () neotext ! ca>
Date:       2008-12-11 16:15:53
Message-ID: 20081211091553.de409e58.campbell () neotext ! ca
[Download RAW message or body]

Howdy list?  

I am having problems with the sound on a 4.3 system 
running Gnome desktop.  

The error that  mplayer gives is:

AO SUN  Can t open audio device /dev/audio, Device busy -  nosound 

This has not always been broken, and there is nothing apparent to
me in the dmesg (following).  If anyone can give me a clue as to
what is wrong here I would greatly appreciate it.

Thanks,

Dhu
 
OpenBSD 4.3-current (GENERIC) #951  Wed Jun 25 10 53 21 MDT 2008 
    deraadt@i386.openbsd.org /usr/src/sys/arch/i386/compile/GENERIC 
cpu0  AMD Duron(tm) processor ("AuthenticAMD" 686-class, 64KB L2 cache) \
1.40 GHz  cpu0  FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE \
 real mem  = 1073250304 (1023MB) 
avail mem = 1029591040 (981MB) 
mainbus0 at root 
bios0 at mainbus0  AT/286  BIOS, date 09/09/03, BIOS32 rev. 0 @ 0xfb7f0, \
SMBIOS rev. 2.2 @ 0xf0800 (33 entries)  bios0  vendor Phoenix Technologies, \
LTD version "6.00 PG" date 09/09/2003  bios0  VIA Technologies, Inc. \
KM266-8235  apm0 at bios0  Power Management spec V1.2 (slowidle) 
apm0  AC on, battery charge unknown 
acpi at bios0 function 0x0 not configured 
pcibios0 at bios0  rev 2.1 @ 0xf0000/0xdaa4 
pcibios0  PCI IRQ Routing Table rev 1.0 @ 0xfd9f0/176 (9 entries) 
pcibios0  PCI Exclusive IRQs  5 10 11 12 
pcibios0  PCI Interrupt Router at 000 17 0 ("VIA VT82C596A ISA" rev 0x00) 
pcibios0  PCI bus #1 is the last bus 
bios0  ROM list  0xc0000/0x8000 0xc8000/0x8000! 
cpu0 at mainbus0 
pci0 at mainbus0 bus 0  configuration mode 1 (no bios) 
pchb0 at pci0 dev 0 function 0 "VIA VT8375 PCI" rev 0x00 
ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00 
pci1 at ppb0 bus 1 
vga1 at pci1 dev 0 function 0 "ATI Mach64 GZ" rev 0x7a 
wsdisplay0 at vga1 mux 1  console (80x25, vt100 emulation) 
wsdisplay0  screen 1-5 added (80x25, vt100 emulation) 
agp0 at vga1  v2, aperture at 0xc0000000, size 0x10000000 
eap0 at pci0 dev 8 function 0 "Ensoniq CT5880" rev 0x02  irq 11 
ac97  codec id 0x83847608 (SigmaTel STAC9708/11) 
ac97  codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D 
audio0 at eap0 
midi0 at eap0   AudioPCI MIDI UART  
rl0 at pci0 dev 9 function 0 "Accton MPX 5030/5038" rev 0x10  irq 10, \
address 00 e0 29 88 90 26  rlphy0 at rl0 phy 0  RTL internal PHY 
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80  irq 11 
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80  irq 10 
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80  irq 5 
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82  irq 12 
usb0 at ehci0  USB revision 2.0 
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1 
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00 
iic0 at viapm0 
spdmem0 at iic0 addr 0x50  512MB DDR SDRAM non-parity PC3200CL3.0 
spdmem1 at iic0 addr 0x51  512MB DDR SDRAM non-parity PC3200CL3.0 
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06  ATA133, \
channel 0 configured to compatibility, channel 1 configured to \
compatibility  wd0 at pciide0 channel 0 drive 0   WDC WD800JB-00JJC0  
wd0  16-sector PIO, LBA, 76319MB, 156301488 sectors 
wd1 at pciide0 channel 0 drive 1   WDC WD2500JB-00GVA0  
wd1  16-sector PIO, LBA48, 238475MB, 488397168 sectors 
wd0(pciide0 0 0)  using PIO mode 4, Ultra-DMA mode 5 
wd1(pciide0 0 1)  using PIO mode 4, Ultra-DMA mode 5 
atapiscsi0 at pciide0 channel 1 drive 0 
scsibus0 at atapiscsi0  2 targets, initiator 7 
cd0 at scsibus0 targ 0 lun 0   HL-DT-ST, DVD-RAM GSA-H50N, 1.00  ATAPI \
5/cdrom removable  atapiscsi1 at pciide0 channel 1 drive 1 
scsibus1 at atapiscsi1  2 targets, initiator 7 
cd1 at scsibus1 targ 0 lun 0   PIONEER, DVD-RW DVR-105, 1.30  ATAPI 5/cdrom \
removable  cd0(pciide0 1 0)  using PIO mode 4, Ultra-DMA mode 2 
cd1(pciide0 1 1)  using PIO mode 4, Ultra-DMA mode 2 
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74  irq 11, address 00 \
0d 87 30 5c 98  ukphy0 at vr0 phy 1  Generic IEEE 802.3u media interface, \
rev. 8  OUI 0x004063, model 0x0032  usb1 at uhci0  USB revision 1.0 
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1 
usb2 at uhci1  USB revision 1.0 
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1 
usb3 at uhci2  USB revision 1.0 
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1 
isa0 at mainbus0 
isadma0 at isa0 
com0 at isa0 port 0x3f8/8 irq 4  ns16550a, 16 byte fifo 
pckbc0 at isa0 port 0x60/5 
pckbd0 at pckbc0 (kbd slot) 
pckbc0  using irq 1 for kbd slot 
wskbd0 at pckbd0  console keyboard, using wsdisplay0 
pcppi0 at isa0 port 0x61 
midi1 at pcppi0   PC speaker  
spkr0 at pcppi0 
lpt0 at isa0 port 0x378/4 irq 7 
it0 at isa0 port 0x2e/2  IT8705F rev 0x02, EC port 0x290 
npx0 at isa0 port 0xf0/16  reported by CPUID  using exception 16 
biomask ff6d netmask ff6d ttymask ffff 
mtrr  Pentium Pro MTRR support 
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech USB Receiver" \
rev 1.10/34.10 addr 2  uhidev0  iclass 3/1 
ums0 at uhidev0  16 buttons, Z dir 
wsmouse0 at ums0 mux 0 
uhidev1 at uhub2 port 2 configuration 1 interface 0 "Darfon USB Combo \
Keyboard" rev 1.10/2.02 addr 3  uhidev1  iclass 3/1 
ukbd0 at uhidev1  8 modifier keys, 6 key codes 
wskbd1 at ukbd0 mux 1 
wskbd1  connecting to wsdisplay0 
uhidev2 at uhub2 port 2 configuration 1 interface 1 "Darfon USB Combo \
Keyboard" rev 1.10/2.02 addr 3  uhidev2  iclass 3/0, 3 report ids 
uhid0 at uhidev2 reportid 1  input=1, output=0, feature=0 
uhid1 at uhidev2 reportid 2  input=3, output=0, feature=0 
uhid2 at uhidev2 reportid 3  input=2, output=0, feature=0 
softraid0 at root 
root on wd0a swap on wd0b dump on wd0b 


[prev in list] [next in list] [prev in thread] [next in thread]