[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openbsd-misc
Subject:    Re: OpenBSD/i386 3.8 on a Compaq DL380 SMP with GENERIC.MP
From:       Bruno Carnazzi <bcarnazzi () gmail ! com>
Date:       2006-01-31 7:37:37
Message-ID: 1464be950601302337v46c7a4a3v6045cb30d2287dd7 () mail ! gmail ! com
[Download RAW message or body]

Thank you guys,

Setting Linux as OS in the BIOS did the trick ! top(1) now reports 2 CPUs.
OS was previously setted at 'Other'.
Is there some stability/performance advantage in upgrading the
Proliant Firmware ?

Here's the new dmesg :

OpenBSD 3.8 (GENERIC.MP) #298: Sat Sep 10 15:51:54 MDT 2005
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 2147049472 (2096728K)
avail mem = 1953083392 (1907308K)
using 4278 buffers containing 107454464 bytes (104936K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks ROSB4
SouthBridge" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x800
0xe8000/0x6000 0xee000/0x2000!
mainbus0: Intel MP Specification (Version 1.4) (COMPAQ   PROLIANT    )
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 132 MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
mainbus0: bus 0 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 9 is type ISA
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 11, 35 pins
ioapic0: misconfigured as apic 0, remapped to apic 8
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x05
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x05
pci1 at pchb1 bus 3
cac0 at pci0 dev 1 function 0 "Symbios Logic 53c1510" rev 0x02: apic 8
int 10 (irq 10) Compaq Integrated Array
scsibus0 at cac0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <Compaq, RAID5 volume #, > SCSI2 0/direct fixed
sd0: 69455MB, 17432 cyl, 255 head, 32 sec, 512 bytes/sec, 142245120 sec total
fxp0 at pci0 dev 2 function 0 "Intel 82557" rev 0x08, i82559: apic 8
int 11 (irq 11), address 00:02:a5:29:15:f0
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci0 dev 3 function 0 "ATI Mach64 GV" rev 0x7a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not configured
xl0 at pci0 dev 5 function 0 "3Com 3c905C 100Base-TX" rev 0x78: apic 8
int 5 (irq 5)xl0: reset didn't complete
, address 00:0a:5e:5a:c9:a4
exphy0 at xl0 phy 24: 3Com internal media interface
xl0: reset didn't complete
pcib0 at pci0 dev 15 function 0 "ServerWorks ROSB4 SouthBridge" rev 0x4f
pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-224E, 9.0B> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02

Bruno.

On 1/30/06, Steven S <ssurdock@engineered-net.com> wrote:
> owner-misc@openbsd.org wrote:
> > On 1/30/06, Bruno Carnazzi <bcarnazzi@gmail.com> wrote:
> >>   Hi all,
> >>
> >> Everything seems to work fine but OpenBSD find only one CPU ! :(
> >> Somebody know why and how can I use the 2 CPUs ?
> >>
> ...
> >
> > Works fine here on the DL380G4's  with -current (worked with release
> > too if I remember correctly).  From your dmesg, this looks like a
> > first generation box - there's numerous tweaks in the BIOS on these
> > machines.  Until recently I also had a DL360G1 running 3.7 with both
> > CPUs recognized - this should be more or less the same hardware you
> > have.
> >
> > --Bill
>
> I have two dual DL360-G1's in a FW/CARP config running now.  I ended up
> using the Compaq SmartStart CD (or whatever the bootable CD utility is
> called) and set the OS to "Linux".
>
> -Steve S.

[prev in list] [next in list] [prev in thread] [next in thread]