[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openbsd-hppa
Subject:    715/50 running diskfull
From:       Otto Moerbeek <otto () drijf ! net>
Date:       2004-03-19 12:49:36
Message-ID: Pine.BSO.4.58.0403191337370.3313 () inez ! intra ! drijf ! net
[Download RAW message or body]

Hi,

If you have been tracked source changes, you may already know this, but
for those who do not: some recent work (addition of oosiop(4) and a kludge
to work around a problem in the viper memory controller) has made it
possible to run my 715/50 happily with two disks.  Last night it completed
a make build, and it even feels fast for a 50MHz machine :-)

Bye, bye, diskless world....

	-Otto


OpenBSD 3.5 (GENERIC) #1: Wed Mar 17 10:15:22 CET 2004
    otto@mj:/usr/src/sys/arch/hppa/compile/GENERIC
HP 9000/715/50 (Scorpio) PA-RISC 1.1a
real mem = 67108864 (524288 reserved for PROM, 4890624 used by OpenBSD)
avail mem = 53370880
using 1630 buffers containing 6676480 bytes of memory
mainbus0 (root) [flex fff80000]
pdc0 at mainbus0
power0 at mainbus0: not available
mem0 at mainbus0 offset ffbf000: viper rev 0, size 64MB
cpu0 at mainbus0 offset ffbe000 irq 31: PCXT L1-A 50MHz, FPU PCXT (Rolex - 
CMOS-26B) rev 1
cpu0: 64K(32b/l) Icache, 64K(32b/l) wr-back coherent Dcache, 120 coherent 
TLB, 16 BTLB
mg0 at mainbus0 offset c000000 irq 17: HWPC000 rev 0, 25 MHz
eisa0 at mg0
unknown Hewlett-Packard device HWP1870 at eisa0 slot 1 not configured
isa at mg0 not configured
asp0 at mainbus0 offset 82f000 irq 28: Scorpio rev 1, lan 1 scsi 7
gsc0 at asp0: leds
harmony0 at gsc0 offset 0 irq 13: rev 0
audio0 at harmony0
lpt0 at gsc0 offset 24000 irq 7
com1 at gsc0 offset 22000 irq 6: ns16550a, 16 byte fifo
com0 at gsc0 offset 23000 irq 5: ns16550a, 16 byte fifo
hil0 at gsc0 offset 21000 irq 1
ie0 at gsc0 offset 26000 irq 8: i82596DX v0.0, address 08:00:09:49:53:39
oosiop0 at gsc0 offset 25000 irq 9: NCR53C700 rev 0, 50MHz, SCSI ID 7
scsibus0 at oosiop0: 8 targets
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, M1606S-512, 6A82> SCSI2 0/direct 
fixed
sd0: 1041MB, 3457 cyl, 6 head, 102 sec, 512 bytes/sec, 2131992 sec total
sd1 at scsibus0 targ 6 lun 0: <SEAGATE, ST32272N, 0876> SCSI2 0/direct 
fixed
sd1: 2157MB, 6300 cyl, 4 head, 175 sec, 512 bytes/sec, 4419464 sec total
sti0 at mainbus0 offset 4000000 irq 11: HPA1991AGrayscale rev 8.02;10, ID 
0x9299000000000000
sti0: 2048x1024 frame buffer, 1280x1024x8 display, offset 0x0
sti0: 10x20 font type 1, 40 bpc, charset 0-255
biomask 0x7 netmask 0xf ttymask 0x3f
boot path: 2/0/1.0 class=1 flags=c0<autoboot,autosearch> hpa=0xf0825000 
spa=0x0 io=0x9f4c
root on sd0a swap on sd0b
hilkbd0 at hil0 code 1: 109-key keyboard, layout f, 3 leds
wskbd0 at hilkbd0 (mux 1 ignored for console): console keyboard
hilms0 at hil0 code 2: Mouse, 2 axes, 3 buttons
wsmouse0 at hilms0 mux 0
wsdisplay0 at sti0: console (default, vt100 emulation), using wskbd0
rootdev=0x400 rrootdev=0xa00 rawdev=0xa02

[prev in list] [next in list] [prev in thread] [next in thread]