[prev in list] [next in list] [prev in thread] [next in thread]
List: openbsd-bugs
Subject: Re: Problems with pmax
From: Mats O Jansson <maja () cntw ! com>
Date: 1999-04-15 12:22:36
[Download RAW message or body]
On Thu, 15 Apr 1999, Keijo Pyöriä wrote:
> Hi,
>
> I'd have the plan to use OpenBSD on decstation 5000-240
> hardware and after many installations I have x-graphics
> problem.
> I have installed V2.3 and V2.4 pmax versions and I haven't
> found the right way to configure graphics console.
> Error description is 'xinit: can't load library ´libXmu.so.6´',
> when I try to use 'startx'-command.
I think you need a couple of things
1) a /usr/X11R6/lib line in /etc/ld.so.conf
2) a ldconfig /usr/X11R6/lib in /etc/rc
3) You might need a softlink /usr/lib/libc.so.17 pointing to the current
libc version.
> My computer contein is:
> ----------------------------
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
>
> vm_mem_init: WARN: MD code did not set page size
> OpenBSD 2.3 (GENERIC) #0: Mon Apr 20 23:41:04 MEST 1998
> root@winona:/winona.a/src-pmax/sys/arch/pmax/compile/GENERIC
> real mem = 234881024
> avail mem = 216780800
> using 2892 buffers containing 11845632 bytes of memory
> mainbus0 (root)
> cpu0 at mainbus0: MIPS R3000 CPU Rev. 3.0 with MIPS R3010 FPC Rev. 4.0
> tc0 at mainbus0: 25 MHz clock
> asic0 at tc0 slot 3 offset 0x0
> le0 at asic0 offset 0xc0000 priority 4: address 08:00:2b:23:01:f0
> le0: 32 receive buffers, 8 transmit buffers
> scc0 at asic0 offset 0x100000 priority 6
> scc1 at asic0 offset 0x180000 priority 5
> clock0 at asic0 offset 0x200000 priority 0
> asc0 at asic0 offset 0x300000 priority 3: target 7
> le1 at tc0 slot 2 offset 0x0: address 08:00:2b:24:34:84
> le1: 32 receive buffers, 8 transmit buffers
> device PMAZ-AA at tc0 slot 1 offset 0x0 not configured
> sfb0 at tc0 slot 0 offset 0x0 (1280x1024x8) (console)
> Beginning old-style SCSI device autoconfiguration
> rz0 at asc0 drive 0 slave 0 <DEC RZ55 (C) DEC rev 1000>
> rz0: 316MB, 649040 512 byte blocks
> rz1 at asc0 drive 1 slave 0 <DEC RZ58 (C) DEC rev 3000>
> rz1: 1317MB, 2698061 512 byte blocks
> rz2 at asc0 drive 2 slave 0 <MICROP 1924-21MZ1077804 rev HZ2P>
> rz2: 2000MB, 4096656 512 byte blocks
> rz3 at asc0 drive 3 slave 0 <MICROP 1924-21MZ1077804 rev HZ2P>
> rz3: 2000MB, 4096656 512 byte blocks
> root device? WARNING: clock lost 344 days -- CHECK AND RESET THE DATE!
> scc0,1: silo overflow
> scc0,1: silo overflow
> scc0,1: silo overflow
> -------------------------------
> Have you any ideas to my problems or do you recommend to leave the
> whole operation?
> I have many Decstations hardwares, which are unused.
> Many thanks for you.
>
> best regards, Keijo Pyöriä
> ----
> email: keijo.pyoria@sonera.fi
>
>
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic