[prev in list] [next in list] [prev in thread] [next in thread]
List: openbsd-bugs
Subject: Re: interface setting from half to full duplex
From: Sebastian Benoit <benno () openbsd ! org>
Date: 2019-06-27 20:18:43
Message-ID: 20190627201843.GA4804 () mail ! webmonster ! de
[Download RAW message or body]
ravi new(ravibrknew1@gmail.com) on 2019.06.27 22:19:06 +0530:
> Actually i tried same command, but the command entered into infinite loop
> it means prompt is not coming.
> All these things , i am doing on openbsd 32bit which is deployed on remote
> server.
>
> Another thing is that,when openbsd is rebooted ,one interface is showing
> 1000baseTX for card and for next reboot
> same interface is showing 10baseTX .Where is the problem.
>
> Next thing is that ,em0 interface showing 10baseTx instead of 1000baseTX
> and it is also showing halfduplex.
>
> if em0(internet interface card) shows half duplex and traffic is coming
> from external to internal ,then Does traffic go to em1(internal interface)
> or not due to half duplex setting of external interface card.
>
> Struck due to this,pls give me solution.
show the output of ifconfig before you do anything, and then all
other commands (and their output) you run.
And show a dmesg.
Otherwise we are just guessing what you do.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic