[prev in list] [next in list] [prev in thread] [next in thread]
List: openbsd-bugs
Subject: install: Can't umount $ROOTDEV!
From: RD Thrush <openbsd () st ! thrush ! com>
Date: 2016-09-16 12:39:53
Message-ID: 57DBE819.70103 () st ! thrush ! com
[Download RAW message or body]
> Synopsis: Both upgrade and autoinstall fail w/ "Can't umount /dev/sd0a!"
> Category: system
> Environment:
System : OpenBSD 6.0
Details : OpenBSD 6.0-current (GENERIC.MP) #2458: Thu Sep 15 23:24:57 MDT 2016
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
Architecture: OpenBSD.amd64
Machine : amd64
> Description:
install fails for either upgrade or autoinstall.
Also, I noticed a hang after the install as the reboot did not automatically
happen. A ^C and "reboot" was required to restart the new system. It may
have been an artifact of my patch.
> How-To-Repeat:
Boot bsd.rd and attempt upgrade/autoinstall.
> Fix:
The appended serial console capture contains my edit. Here's the source patch:
Index: install.sub
===================================================================
RCS file: /cvs/src/distrib/miniroot/install.sub,v
retrieving revision 1.918
diff -u -p -u -p -r1.918 install.sub
--- install.sub 13 Sep 2016 21:25:29 -0000 1.918
+++ install.sub 16 Sep 2016 12:28:04 -0000
@@ -2737,7 +2737,7 @@ do_upgrade(){
check_fs
# Mount filesystems in /etc/fstab.
- umount /mnt || { echo "Can't umount $ROOTDEV!"; exit; }
+ umount -f /mnt || { echo "Can't umount $ROOTDEV!"; exit; }
mount_fs
# Feed the random pool some entropy before we read from it.
dmesg: [ at end of serial console capture ]
usbdevs:
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev \
1.00 port 1 addr 2: full speed, power 100 mA, config 1, QEMU USB Tablet(0x0001), \
QEMU(0x0627), rev 0.00, iSerialNumber 42 port 2 powered
################## serial console capture #######################
> > OpenBSD/amd64 BOOT 3.32
Disk BIOS# Type Cyls Heads Secs Flags Checksum
hd0 0x80 label 1023 255 63 0x2 0xdce59776
hd1 0x81 label 1023 255 63 0x2 0x2db005d6
Region 0: type 1 at 0x0 for 639KB
Region 1: type 2 at 0x9fc00 for 1KB
Region 2: type 2 at 0xf0000 for 64KB
Region 3: type 1 at 0x100000 for 2096000KB
Region 4: type 2 at 0x7ffe0000 for 128KB
Region 5: type 2 at 0xfeffc000 for 16KB
Region 6: type 2 at 0xfffc0000 for 256KB
Low ram: 639KB High ram: 2096000KB
Total free memory: 2096639KB
boot>
booting hd0a:bsd.rd.new: 3341304+1422336+2400904+0+598016 [72+440400+282208]=0x819978
entry point at 0x1001000 [7205c766, 34000004, 24448b12, b4c0a304]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2016 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.0-current (RAMDISK_CD) #2236: Thu Sep 15 23:29:45 MDT 2016
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 2130575360 (2031MB)
avail mem = 2064347136 (1968MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf0cd0 (9 entries)
bios0: vendor SeaBIOS version \
"rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org" date \
04/01/2014
bios0: QEMU Standard PC (i440FX + PIIX, 1996)
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT APIC HPET
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Common KVM processor, 3400.48 MHz
cpu0: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,x2APIC,HV,NXE,LONG,LAHF
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way \
L2 cache
cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: apic clock running at 1000MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu at acpi0 not configured
"ACPI0006" at acpi0 not configured
"PNP0303" at acpi0 not configured
"PNP0F13" at acpi0 not configured
"PNP0700" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"ACPI0007" at acpi0 not configured
"ACPI0007" at acpi0 not configured
pvbus0 at mainbus0: KVM
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
"Intel 82371SB ISA" rev 0x00 at pci0 dev 1 function 0 not configured
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired \
to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.2.> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 0 int 11
"Intel 82371AB Power" rev 0x03 at pci0 dev 1 function 3 not configured
vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
vga1: aperture needed
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Memory" rev 0x00
virtio0: no matching child driver; not configured
virtio1 at pci0 dev 10 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk0 at virtio1
scsibus1 at vioblk0: 2 targets
sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
sd0: 32768MB, 512 bytes/sector, 67108864 sectors
virtio1: msix shared
virtio2 at pci0 dev 11 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk1 at virtio2
scsibus2 at vioblk1: 2 targets
sd1 at scsibus2 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
sd1: 51200MB, 512 bytes/sector, 104857600 sectors
virtio2: msix shared
virtio3 at pci0 dev 18 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio3: address 8a:2e:d1:64:f7:6b
virtio3: msix shared
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
uhidev0 at uhub0 port 1 configuration 1 interface 0 "QEMU QEMU USB Tablet" rev \
2.00/0.00 addr 2
uhidev0: iclass 3/0
uhid at uhidev0 not configured
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/amd64 6.0 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? u
At any prompt except password prompts you can escape to a shell by
typing '!'. Default answers are shown in []'s and are selected by
pressing RETURN. You can exit this program at any time by pressing
Control-C, but this can leave your system in an inconsistent state.
Terminal type? [vt220]
Available disks are: sd0 sd1.
Which disk is the root disk? ('?' for details) [sd0]
Checking root filesystem (fsck -fp /dev/sd0a)...OK.
Mounting root filesystem (mount -o ro /dev/sd0a /mnt)...OK.
DHCPREQUEST on vio0 to 255.255.255.255
DHCPACK from 10.1.2.1 (00:08:a2:0a:73:bd)
bound to 10.1.2.7 -- renewal in 302400 seconds.
Force checking of clean non-root filesystems? [no]
fsck -p 8f3e304cddb66a7a.h...OK.
fsck -p 8f3e304cddb66a7a.f...OK.
fsck -p 8f3e304cddb66a7a.l...OK.
fsck -p c1a908809de1d866.o...OK.
fsck -p 8f3e304cddb66a7a.e...OK.
umount: /mnt: Device busy
Can't umount sd0a!
# ls
.profile dev install.md mnt2 upgrade
autoinstall etc install.sub sbin usr
bin install mnt tmp var
# grep -n 'umount /mnt' install.sub
2138: umount /mnt || { echo "Can't umount $ROOTDEV!"; exit; }
# ed install.sub
50631
2138p
umount /mnt || { echo "Can't umount $ROOTDEV!"; exit; }
s/umount/umount -f/
p
umount -f /mnt || { echo "Can't umount $ROOTDEV!"; exit; }
w
50634
q
# exit
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/amd64 6.0 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? a
DHCPREQUEST on vio0 to 255.255.255.255
DHCPACK from 10.1.2.18 (00:02:b3:ca:06:00)
bound to 10.1.2.7 -- renewal in 302400 seconds.
Fetching http://a8v/config/openbsd/amd64/8a:2e:d1:64:f7:6b-upgrade.conf?path=snapshots/amd64
Fetching http://a8v/config/openbsd/amd64/obsd64-upgrade.conf?path=snapshots/amd64
Performing non-interactive upgrade...
Terminal type? [vt220] vt220
Available disks are: sd0 sd1.
Which disk is the root disk? ('?' for details) [sd0] sd0
Checking root filesystem (fsck -fp /dev/sd0a)...OK.
Mounting root filesystem (mount -o ro /dev/sd0a /mnt)...OK.
DHCPREQUEST on vio0 to 255.255.255.255
DHCPACK from 10.1.2.1 (00:08:a2:0a:73:bd)
bound to 10.1.2.7 -- renewal in 302400 seconds.
Force checking of clean non-root filesystems? [no] no
fsck -p 8f3e304cddb66a7a.h...OK.
fsck -p 8f3e304cddb66a7a.f...OK.
fsck -p 8f3e304cddb66a7a.l...OK.
fsck -p c1a908809de1d866.o...OK.
fsck -p 8f3e304cddb66a7a.e...OK.
/dev/sd0a (8f3e304cddb66a7a.a) on /mnt type ffs (rw, local)
/dev/sd0h (8f3e304cddb66a7a.h) on /mnt/home type ffs (rw, local, nodev, nosuid)
/dev/sd0f (8f3e304cddb66a7a.f) on /mnt/usr type ffs (rw, local, nodev)
/dev/sd0l (8f3e304cddb66a7a.l) on /mnt/usr/local type ffs (rw, local, nodev, \
wxallowed)
/dev/sd1o (c1a908809de1d866.o) on /mnt/usr/obj type ffs (rw, asynchronous, local, \
nodev, nosuid)
/dev/sd0e (8f3e304cddb66a7a.e) on /mnt/var type ffs (rw, local, nodev, nosuid)
Let's upgrade the sets!
Location of sets? (cd0 disk http or 'done') [http] http
HTTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none] none
HTTP Server? (hostname, list#, 'done' or '?') [10.1.2.15] 10.1.2.15
Server directory? [pub/OpenBSD/snapshots/amd64] pub/OpenBSD/snapshots/amd64
Select sets by entering a set name, a file name pattern or 'all'. De-select
sets by prepending a '-' to the set name, file name pattern or 'all'. Selected
sets are labelled '[X]'.
[X] bsd [X] base60.tgz [X] game60.tgz [X] xfont60.tgz
[X] bsd.rd [X] comp60.tgz [X] xbase60.tgz [X] xserv60.tgz
[X] bsd.mp [X] man60.tgz [X] xshare60.tgz [ ] site60.tgz
Set name(s)? (or 'abort' or 'done') [done] site60.tgz
[X] bsd [X] base60.tgz [X] game60.tgz [X] xfont60.tgz
[X] bsd.rd [X] comp60.tgz [X] xbase60.tgz [X] xserv60.tgz
[X] bsd.mp [X] man60.tgz [X] xshare60.tgz [X] site60.tgz
Set name(s)? (or 'abort' or 'done') [done] done
Get/Verify SHA256.sig 100% |**************************| 2152 00:00
Signature Verified
Get/Verify bsd 100% |**************************| 10241 KB 00:00
Get/Verify bsd.rd 100% |**************************| 7706 KB 00:00
Get/Verify bsd.mp 100% |**************************| 10283 KB 00:00
Get/Verify base60.tgz 100% |**************************| 54218 KB 00:01
Get/Verify comp60.tgz 100% |**************************| 49879 KB 00:00
Get/Verify man60.tgz 100% |**************************| 8534 KB 00:00
Get/Verify game60.tgz 100% |**************************| 2708 KB 00:00
Get/Verify xbase60.tgz 100% |**************************| 23000 KB 00:00
Get/Verify xshare60.tgz 100% |**************************| 4405 KB 00:00
Get/Verify xfont60.tgz 100% |**************************| 39342 KB 00:01
Get/Verify xserv60.tgz 100% |**************************| 21384 KB 00:00
Get/Verify site60.tgz 100% |**************************| 242 00:00
Checksum test for site60.tgz failed. Continue anyway? [no] yes
Unverified sets: site60.tgz. Continue without verification? [no] yes
Installing bsd 100% |**************************| 10241 KB 00:00
Installing bsd.rd 100% |**************************| 7706 KB 00:00
Installing bsd.mp 100% |**************************| 10283 KB 00:00
Installing base60.tgz 100% |**************************| 54218 KB 00:40
Installing comp60.tgz 100% |**************************| 49879 KB 00:29
Installing man60.tgz 100% |**************************| 8534 KB 00:10
Installing game60.tgz 100% |**************************| 2708 KB 00:00
Installing xbase60.tgz 100% |**************************| 23000 KB 00:07
Installing xshare60.tgz 100% |**************************| 4405 KB 00:20
Installing xfont60.tgz 100% |**************************| 39342 KB 00:22
Installing xserv60.tgz 100% |**************************| 21384 KB 00:01
Installing site60.tgz 100% |**************************| 242 00:00
Location of sets? (cd0 disk http or 'done') [done] done
Making all device nodes...done.
Updated /etc/boot.conf
Multiprocessor machine; using bsd.mp instead of bsd.
CONGRATULATIONS! Your OpenBSD upgrade has been successfully completed!
To boot the new system, enter 'reboot' at the command prompt.
^C# reboot
syncing disks... done
rebooting...
> > OpenBSD/amd64 BOOT 3.32
Disk BIOS# Type Cyls Heads Secs Flags Checksum
hd0 0x80 label 1023 255 63 0x2 0xdce59776
hd1 0x81 label 1023 255 63 0x2 0x2db005d6
Region 0: type 1 at 0x0 for 639KB
Region 1: type 2 at 0x9fc00 for 1KB
Region 2: type 2 at 0xf0000 for 64KB
Region 3: type 1 at 0x100000 for 2096000KB
Region 4: type 2 at 0x7ffe0000 for 128KB
Region 5: type 2 at 0xfeffc000 for 16KB
Region 6: type 2 at 0xfffc0000 for 256KB
Low ram: 639KB High ram: 2096000KB
Total free memory: 2096639KB
boot>
booting hd0a:/bsd: 6868532+2192392+257344+0+671744 [72+726168+481759]=0xaaf140
entry point at 0x1001000 [7205c766, 34000004, 24448b12, fc20a304]
[ using 1208640 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2016 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.0-current (GENERIC.MP) #2458: Thu Sep 15 23:24:57 MDT 2016
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2130575360 (2031MB)
avail mem = 2061606912 (1966MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf0cd0 (9 entries)
bios0: vendor SeaBIOS version \
"rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org" date \
04/01/2014
bios0: QEMU Standard PC (i440FX + PIIX, 1996)
acpi0 at bios0: rev 0
acpi0: sleep states S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC HPET
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Common KVM processor, 3400.46 MHz
cpu0: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,x2APIC,HV,NXE,LONG,LAHF
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way \
L2 cache
cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 999MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Common KVM processor, 3400.13 MHz
cpu1: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,x2APIC,HV,NXE,LONG,LAHF
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way \
L2 cache
cpu1: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu1: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
acpihpet0 at acpi0: 100000000 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
"ACPI0006" at acpi0 not configured
"PNP0303" at acpi0 not configured
"PNP0F13" at acpi0 not configured
"PNP0700" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"ACPI0007" at acpi0 not configured
"ACPI0007" at acpi0 not configured
pvbus0 at mainbus0: KVM
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired \
to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.2.> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 0 int 11
piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 0 int 9
iic0 at piixpm0
vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Memory" rev 0x00
viomb0 at virtio0
virtio0: apic 0 int 11
virtio1 at pci0 dev 10 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk0 at virtio1
scsibus2 at vioblk0: 2 targets
sd0 at scsibus2 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
sd0: 32768MB, 512 bytes/sector, 67108864 sectors
virtio1: msix shared
virtio2 at pci0 dev 11 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk1 at virtio2
scsibus3 at vioblk1: 2 targets
sd1 at scsibus3 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
sd1: 51200MB, 512 bytes/sector, 104857600 sectors
virtio2: msix shared
virtio3 at pci0 dev 18 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio3: address 8a:2e:d1:64:f7:6b
virtio3: msix shared
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 1: density unknown
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
uhidev0 at uhub0 port 1 configuration 1 interface 0 "QEMU QEMU USB Tablet" rev \
2.00/0.00 addr 2
uhidev0: iclass 3/0
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (8f3e304cddb66a7a.a) swap on sd0b dump on sd0b
Fast boot: skipping disk checks.
setting tty flags
pf enabled
net.inet.ip.forwarding: 0 -> 1
ddb.console: 0 -> 1
ddb.max_line: 24 -> 0
ddb.log: 1 -> 1
kern.splassert: 1 -> 2
kern.nosuidcoredump: 1 -> 3
kern.pool_debug: 1 -> 0
machdep.allowaperture: 0 -> 0
starting network
DHCPREQUEST on vio0 to 255.255.255.255
DHCPACK from 10.1.2.18 (00:02:b3:ca:06:00)
bound to 10.1.2.7 -- renewal in 302400 seconds.
reordering libraries: done.
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
Path to firmware: http://firmware.openbsd.org/firmware/snapshots/
No devices found which need firmware files to be downloaded.
starting local daemons: cron.
Fri Sep 16 07:52:14 EDT 2016
OpenBSD/amd64 (obsd64.thrush.com) (tty00)
login:
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic