[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openbsd-bugs
Subject:    Boot Up Bug
From:       "MURRAY, DUNCAN" <duncanmurray () ns ! sympatico ! ca>
Date:       2008-03-27 4:56:44
Message-ID: 47EB290C.7000109 () ns ! sympatico ! ca
[Download RAW message or body]

This refers to a report that i have already found but did not find a fix 
for. ID is 1597. The system hangs at boot up after installation at this 
point in boot up.


 >> OpenBSD/i386 BOOT 3.01
boot>
booting hd0a:/bsd: 5665588+872060 [52+291168+272312]=0x6c5c70
entry point at 0x200120
[ using 563904 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved.  
http://www.OpenBSD.org

OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(TM) XP 1800+ ("AuthenticAMD" 686-class, 256KB L2 cache) 
1.16 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 536424448 (511MB)
avail mem = 511057920 (487MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/10/04, BIOS32 rev. 0 @ 0xf1a60, 
SMBIOS rev. 2.3 @ 0xf39e0 (49 entries)
bios0: vendor Award Software, Inc. version "ASUS A7V8X ACPI BIOS 
Revision 1015 Beta 003" date 09/10/2004
bios0: ASUSTeK Computer INC. A7V8X
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2122
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2040/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C586 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xf400 0xd0000/0x1800 0xd4000/0x800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8377 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8235 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce FX 5200" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"VIA VT6306 FireWire" rev 0x80 at pci0 dev 7 function 0 not configured
pciide0 at pci0 dev 8 function 0 "Promise PDC20376" rev 0x02: DMA
pciide0: using irq 10 for native-PCI interrupt
bce0 at pci0 dev 9 function 0 "Broadcom BCM4401" rev 0x01: irq 5, 
address 00:e0:18:ef:5f:44
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
ahc0 at pci0 dev 12 function 0 "Adaptec AHA-2940" rev 0x00: irq 9
scsibus0 at ahc0: 8 targets
ne3 at pci0 dev 13 function 0 "Realtek 8029" rev 0x00: irq 11, address 
00:50:ba:de:48:8a
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 11
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 11
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: VIA EHCI root hub, rev 2.00/1.00, addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
iic0 at viapm0
asbtm0 at iic0 addr 0x2d
lm1 at iic0 addr 0x2f: W83791D
pciide1 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, 
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide1 channel 0 drive 0: <IBM-DAQA-33240>
wd0: 16-sector PIO, LBA, 3098MB, 6346368 sectors
wd0(pciide1:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide1 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <LITE-ON, LTR-0841, MS84> SCSI0 5/cdrom 
removable
cd0(pciide1:1:0): using PIO mode 4, DMA mode 2
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 10
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auvia0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: VIA UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: VIA UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: VIA UHCI root hub, rev 1.00/1.00, addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: density unknown
biomask ef45 netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support

[prev in list] [next in list] [prev in thread] [next in thread] 

Configure | About | News | Add a list | Sponsored by KoreLogic