[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openbsd-bugs
Subject:    Re: Kernel boot broblem 3.8
From:       Ted Unangst <ted.unangst () gmail ! com>
Date:       2005-12-30 18:40:23
Message-ID: 4109e9180512301040x33ef2ca8wbdb397bd5aefe5a6 () mail ! gmail ! com
[Download RAW message or body]

boot -c, then disable usb will get you running.

On 12/30/05, vesa n <vesbula@gmail.com> wrote:
> I Tried to install OpenBSD 3.8 on a small HP desktop PC, pentium 4.
> Floppy38.fs boots fine but GENERIC doesn't boot. I typed error messages from
> screen.
> Some did not fit in monitor.
>
> <something>
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0xa600 0xa600/0x2000 0xe0c00/0x9a00!
> cpu0 at mainbus0
> pci0 at mainbus0 bus0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82865G/PE/P CPU-I/0-1" rev 0x02
> vga1 at pci0 dev 2 function 0 "Inter 82865G Video" rev 0x02: aperture at
> 0xf0000
> 000, size 0x8000000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> uchi0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 10
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uchi1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 11
> usb1 at uch1i: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UCHI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 5
> uvm_fault(0xd05ccc00, 0x0, 0, 1) -> e
> kernel: page fault trap, code = 0
> Stopped at usb_schedsoftintr+0xd: call *0x4 (%edx)
> ddb>trace
> usb_schedsoftintr(d176e000,0,0,ffffffff,0) at usb_schedsoftintr+0xd
> uhci_intr1(d176e000) at ihci_intr1+0xac
> Xrecurse_legacy5() at Xrecurse_legacy+0x86
> --- interrupt ---
> Xspllower(d057fa84,8000ea00,d06f1d38,d0220025,d176e000) at Xspllower+0xe
> printf(d04c7ahf,d05c48c0,d04f5ba8,d0579dc4,1) at printf+0x57
> uhci_pci_attach(d1754f40,d176e000,d06f1df0,0,d176c000) at
> uhci_pci_attach+0x150
> config_attach(d1754f40,d0579da4,d06f1df0,d0360020) at config_attach+0xef
> pciattach(d1754fc0,d1754f40,d06f1eb0,0,d0588e38) at pciattach+0x1c8
> config_attach(d1754fc0,d0579288,d06f1eh0,d035fbec) at config_attach+0xef
> mainbus_attach(0,d1754fc0,0,0,d06f1f10) at mainbus_attach+0x164
> config_attach(0,d0579264,0,0,d05ccce0) at config_attach+0xef
> config_rootfound(d051403c,0,d06f1f58,d0336b0c) at config_rootfound+0x27
> cpu_configure(0,1,3,0,3f7f000) at cpu_configure+0x1f
> main(0,0,0,0,0) at main+0x339
> ddb>ps
>   PID   PPID   PGRP   UID   S   FLAGS   WAIT   COMMAND
>  *  0     -1     0      0    7  0x80204         swapper

[prev in list] [next in list] [prev in thread] [next in thread]