[prev in list] [next in list] [prev in thread] [next in thread] 

List:       openbsd-bugs
Subject:    kernel/4953: panic with ral device - dmesg
From:       private <mg () illtis ! dyndns ! org>
Date:       2005-12-26 12:58:34
Message-ID: 200512261258.jBQCwY9q028951 () g33k ! illtis ! dyndns ! org
[Download RAW message or body]

Here is my missing dmesg:

OpenBSD 3.8-current (GENERIC) #6: Tue Dec 13 23:47:08 CET 2005
    root@g33k.illtis.dyndns.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 500 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
                
cpu0: disabling processor serial number
real mem  = 267952128 (261672K)
avail mem = 237633536 (232064K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(d7) BIOS, date 08/26/99, BIOS32 rev. 0 @ 0xfb150
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb5c8
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdd30/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mach64 GZ" rev 0x7a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired \
to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: \
                <IBM-DTTA-350840>
wd0: 16-sector PIO, LBA, 8063MB, 16514064 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power" rev 0x02 at pci0 dev 7 function 3 not configured
ral0 at pci0 dev 9 function 0 "Ralink RT2560" rev 0x01: irq 10, address \
                00:0e:2e:62:9c:6f
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
xl0 at pci0 dev 10 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq 12, address \
00:04:76:1a:d2:4b exphy0 at xl0 phy 24: 3Com internal media interface
dc0 at pci0 dev 12 function 0 "DEC 21142/3" rev 0x41: irq 5, address \
00:00:cb:53:31:c8 sqphy0 at dc0 phy 17: Seeq 84220 10/100 PHY, rev. 0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83782D
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask eb45 netmask ff65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
pppoe0: phase establish
pppoe0: phase authenticate
pppoe0: phase network

-- EOF


[prev in list] [next in list] [prev in thread] [next in thread]