[prev in list] [next in list] [prev in thread] [next in thread]
List: ooh323c-devel
Subject: Re: [ooh323c-devel] LCN 1002
From: "Vishal Phirke" <vphirke () obj-sys ! com>
Date: 2005-10-24 21:43:46
Message-ID: 005101c5d8fc$e1554ff0$4e00000a () D6XKKF11
[Download RAW message or body]
Hi,
I have never tested video part, though I know some others have. In any case,
I found a bug which causes wrong session id being used for video sessions. I
am wondering how this was working for others. Most likely they weren't using
ooh323c as call originator. The latest cvs has the fix for video session id.
Let me know if it doesn't solve your problem.
-Vishal
----- Original Message -----
From: "Sravanthi.K.V." <sravipooji@yahoo.com>
To: "Vishal Phirke" <vphirke@obj-sys.com>;
<ooh323c-devel@lists.sourceforge.net>
Sent: Monday, October 24, 2005 12:37 AM
Subject: Re: [ooh323c-devel] LCN 1002
ooFindLogicalCHannelByOLC is failing becuase the
sessionID doesnot match the pChannel->sessionID. i
traced back pChannel structure and made changes in
ooAddNewLogicalChannel (replaced sessionID=1 by 2)
for
all instances. that is where pslcp gets its
structire
from. but there are lot of clashes between LCN 1001
and 1002. for video transmission, the LCN must
change
to 1002. there are few instances where it doers
chnage
to 1002 becuase of the change in
ooAddNewLogicalChannel().
What i want is: Can u please tell me how to
extablish
a proper H263 connection between two end points by
chnaging the LCN to 1002.
The main problwm is with the sessionID not being
able
to change itself to 2. Can u please fix this.
--- Vishal Phirke <vphirke@obj-sys.com> wrote:
> Hi,
> >
> > Your log shows that call is not even getting
> > established.
> > I think you should try to debug why
> > ooFindLogicalChannelByOLC() is failing.
> > That's what is causing the call being terminated.
> >
> > =>"select: Cannot allocate memory"
> >
> > Which select call are you talking about??
> >
> > -Vishal
> >
> > ----- Original Message -----
> > From: "Sravanthi.K.V." <sravipooji@yahoo.com>
> > To: "Vishal Phirke" <vphirke@obj-sys.com>;
> > <ooh323c-devel@lists.sourceforge.net>
> > Sent: Wednesday, October 12, 2005 10:37 PM
> > Subject: Re: [ooh323c-devel] Cannot allocate
> memory
> >
> >
> > Hi,
> > here is the debug version of the log file.
> > the problem:
> > i have chaged oortp.c to read from a file and send
> > the
> > contents over the n/w. i have commented the plugin
> > line where it says" ooOpenAudioDevice". all i want
> > to
> > do is run ooh323 parallel to ffmpeg or better,
> call
> > ffmpeg functions from ooh323 and vice versa. when
> i
> > do
> > a normal file transfer using ReceiveFuncLnx , it
> > throws an error. the perror occurs when i use
> > "socketselect" func. it says
> > "select: Cannot allocate memory" when the
> connection
> > is created and accepted by the remost comp.
> > The log file of the calling comp is below:
> > ---------Date 10/13/05---------
> > 10:44:59:965 Signalling IP address is set to
> > 10.121.11.162
> > 10:44:59:965 Listen port number is set to 1720
> > 10:44:59:965 Adding endpoint H263 video
> capability
> > CIF.
> > 10:45:00:120 H323 listener creation - successful
> > 10:45:00:196 H.323 Endpoint Configuration is as
> > follows:
> > 10:45:00:196 Trace File: simple.log
> > 10:45:00:196 FastStart - enabled
> > 10:45:00:196 H245 Tunneling - enabled
> > 10:45:00:196 AutoAnswer - disabled
> > 10:45:00:196 Terminal Type - 50
> > 10:45:00:196 T35 CountryCode - 1
> > 10:45:00:196 T35 Extension - 0
> > 10:45:00:196 Manufacturer Code - 71
> > 10:45:00:196 ProductID - objsys
> > 10:45:00:196 VersionID - v0.7.2
> > 10:45:00:196 Local signalling IP address -
> > 10.121.11.162
> > 10:45:00:196 H225 ListenPort - 1720
> > 10:45:00:196 CallerID - objsyscall
> > 10:45:00:196 Call Establishment Timeout - 60
> > seconds
> > 10:45:00:197 MasterSlaveDetermination Timeout -
> 30
> > seconds
> > 10:45:00:197 TerminalCapabilityExchange Timeout -
> > 30
> > seconds
> > 10:45:00:197 LogicalChannel Timeout - 30 seconds
> > 10:45:00:197 Session Timeout - 15 seconds
> > 10:45:04:471 Processing MakeCall command
> ooh323c_1
> > 10:45:04:471 Created a new call (outgoing,
> > ooh323c_1)
> > 10:45:04:472 Configured mediainfo for cap
> > OO_H263VIDEO (outgoing, ooh323c_1)
> > 10:45:04:472 Configured mediainfo for cap
> > OO_H263VIDEO (outgoing, ooh323c_1)
> > 10:45:04:472 Parsing destination 10.121.11.134
> > 10:45:04:472 Generated callRef 81
> > 10:45:04:472 Trying to connect to remote
> > endpoint(10.121.11.134:1720) to setup H2250
> channel
> > (outgoing, ooh323c_1)
> > 10:45:04:548 H2250 transmiter channel creation -
> > succesful (outgoing, ooh323c_1)
> > 10:45:04:549 Preffered capability at index 0 is
> > OO_H263VIDEO. (outgoing, ooh323c_1)
> > 10:45:04:549 Using end-point capabilities for
> > faststart of setupmessage. (outgoing, ooh323c_1)
> > 10:45:04:549 Building olcs with capability
> > OO_H263VIDEO. (outgoing, ooh323c_1)
> > 10:45:04:549 Building OpenLogicalChannel for
> > Receive
> > Capability (outgoing, ooh323c_1)
> > 10:45:04:549 Adding new media channel for cap 31
> > dir
> > receive (outgoing, ooh323c_1)
> > 10:45:04:549 Adding new channel with cap 31
> > (outgoing, ooh323c_1)
> > 10:45:04:549 Using configured media info
> (outgoing,
> > ooh323c_1)
> > 10:45:04:549 Created new logical channel entry
> > (outgoing, ooh323c_1)
> > 10:45:04:549 Building reverse olc. (outgoing,
> > ooh323c_1)
> > 10:45:04:559 Receive channel of type video
> started
> > (outgoing, ooh323c_1)
> > 10:45:04:559 FastStart Element = {
> > 10:45:04:559 forwardLogicalChannelNumber = {
> > 10:45:04:559 1001
> > 10:45:04:560 }
> > 10:45:04:560 forwardLogicalChannelParameters =
> {
> > 10:45:04:560 dataType = {
> > 10:45:04:560 nullData = {
> > 10:45:04:561 NULL
> > 10:45:04:561 }
> > 10:45:04:562 }
> > 10:45:04:562 multiplexParameters = {
> > 10:45:04:562 none = {
> > 10:45:04:563 NULL
> > 10:45:04:563 }
> > 10:45:04:564 }
> > 10:45:04:564 }
> > 10:45:04:564 reverseLogicalChannelParameters =
> {
> > 10:45:04:564 dataType = {
> > 10:45:04:565 videoData = {
> > 10:45:04:565 h263VideoCapability = {
> > 10:45:04:566 sqcifMPI = {
> > 10:45:04:566 1
> > 10:45:04:567 }
> > 10:45:04:568 maxBitRate = {
> > 10:45:04:568 200
> > 10:45:04:569 }
> > 10:45:04:592 unrestrictedVector =
> {
> > 10:45:04:593 FALSE
> > 10:45:04:593 }
> > 10:45:04:594 arithmeticCoding = {
> > 10:45:04:595 FALSE
> > 10:45:04:596 }
> > 10:45:04:596 advancedPrediction =
> {
> > 10:45:04:597 FALSE
> > 10:45:04:598 }
> > 10:45:04:598 pbFrames = {
> > 10:45:04:599 FALSE
> > 10:45:04:600 }
> > 10:45:04:600
> > temporalSpatialTradeOffCapability = {
> > 10:45:04:601 FALSE
> > 10:45:04:602 }
> > 10:45:04:602 errorCompensation = {
> > 10:45:04:603 FALSE
> > 10:45:04:604 }
> > 10:45:04:605 }
> > 10:45:04:605 }
> > 10:45:04:605 }
> > 10:45:04:606 multiplexParameters = {
> > 10:45:04:606
> h2250LogicalChannelParameters
> > =
> > {
> > 10:45:04:607 sessionID = {
> > 10:45:04:607 2
> > 10:45:04:608 }
> > 10:45:04:608 mediaChannel = {
> > 10:45:04:609 unicastAddress = {
> > 10:45:04:610 iPAddress = {
> > 10:45:04:610 network = {
> > 10:45:04:611 '0a790ba2'H
> > 10:45:04:612 }
> > 10:45:04:613 tsapIdentifier
> =
> > {
> > 10:45:04:614 5000
> > 10:45:04:615 }
> > 10:45:04:616 }
> > 10:45:04:617 }
> > 10:45:04:617 }
> > 10:45:04:618 mediaControlChannel = {
> > 10:45:04:618 unicastAddress = {
> > 10:45:04:619 iPAddress = {
> > 10:45:04:620 network = {
> > 10:45:04:621 '0a790ba2'H
> > 10:45:04:622 }
> > 10:45:04:623 tsapIdentifier
> =
> > {
> > 10:45:04:624 5001
> > 10:45:04:625 }
> > 10:45:04:625 }
> > 10:45:04:626 }
> > 10:45:04:627 }
> > 10:45:04:627 }
> > 10:45:04:628 }
> > 10:45:04:628 }
> > 10:45:04:628 }
> > 10:45:04:628 Added RX fs element 1 with
> capability
> > OO_H263VIDEO(outgoing, ooh323c_1)
> > 10:45:04:628 Building OpenLogicalChannel for
> > transmit
> > Capability (outgoing, ooh323c_1)
> > 10:45:04:628 Adding new media channel for cap 31
> > dir
> > transmit (outgoing, ooh323c_1)
> > 10:45:04:628 Adding new channel with cap 31
> >
> === message truncated ===
>
>
>
>
> __________________________________
> Yahoo! FareChase: Search multiple travel sites in
> one click.
> http://farechase.yahoo.com
>
--- Vishal Phirke <vphirke@obj-sys.com> wrote:
> Hi,
>
> Your log shows that call is not even getting
> established.
> I think you should try to debug why
> ooFindLogicalChannelByOLC() is failing.
> That's what is causing the call being terminated.
>
> =>"select: Cannot allocate memory"
>
> Which select call are you talking about??
>
> -Vishal
>
> ----- Original Message -----
> From: "Sravanthi.K.V." <sravipooji@yahoo.com>
> To: "Vishal Phirke" <vphirke@obj-sys.com>;
> <ooh323c-devel@lists.sourceforge.net>
> Sent: Wednesday, October 12, 2005 10:37 PM
> Subject: Re: [ooh323c-devel] Cannot allocate memory
>
>
> Hi,
> here is the debug version of the log file.
> the problem:
> i have chaged oortp.c to read from a file and send
> the
> contents over the n/w. i have commented the plugin
> line where it says" ooOpenAudioDevice". all i want
> to
> do is run ooh323 parallel to ffmpeg or better, call
> ffmpeg functions from ooh323 and vice versa. when i
> do
> a normal file transfer using ReceiveFuncLnx , it
> throws an error. the perror occurs when i use
> "socketselect" func. it says
> "select: Cannot allocate memory" when the connection
> is created and accepted by the remost comp.
> The log file of the calling comp is below:
> ---------Date 10/13/05---------
> 10:44:59:965 Signalling IP address is set to
> 10.121.11.162
> 10:44:59:965 Listen port number is set to 1720
> 10:44:59:965 Adding endpoint H263 video capability
> CIF.
> 10:45:00:120 H323 listener creation - successful
> 10:45:00:196 H.323 Endpoint Configuration is as
> follows:
> 10:45:00:196 Trace File: simple.log
> 10:45:00:196 FastStart - enabled
> 10:45:00:196 H245 Tunneling - enabled
> 10:45:00:196 AutoAnswer - disabled
> 10:45:00:196 Terminal Type - 50
> 10:45:00:196 T35 CountryCode - 1
> 10:45:00:196 T35 Extension - 0
> 10:45:00:196 Manufacturer Code - 71
> 10:45:00:196 ProductID - objsys
> 10:45:00:196 VersionID - v0.7.2
> 10:45:00:196 Local signalling IP address -
> 10.121.11.162
> 10:45:00:196 H225 ListenPort - 1720
> 10:45:00:196 CallerID - objsyscall
> 10:45:00:196 Call Establishment Timeout - 60
> seconds
> 10:45:00:197 MasterSlaveDetermination Timeout - 30
> seconds
> 10:45:00:197 TerminalCapabilityExchange Timeout -
> 30
> seconds
> 10:45:00:197 LogicalChannel Timeout - 30 seconds
> 10:45:00:197 Session Timeout - 15 seconds
> 10:45:04:471 Processing MakeCall command ooh323c_1
> 10:45:04:471 Created a new call (outgoing,
> ooh323c_1)
> 10:45:04:472 Configured mediainfo for cap
> OO_H263VIDEO (outgoing, ooh323c_1)
> 10:45:04:472 Configured mediainfo for cap
> OO_H263VIDEO (outgoing, ooh323c_1)
> 10:45:04:472 Parsing destination 10.121.11.134
> 10:45:04:472 Generated callRef 81
> 10:45:04:472 Trying to connect to remote
> endpoint(10.121.11.134:1720) to setup H2250 channel
> (outgoing, ooh323c_1)
> 10:45:04:548 H2250 transmiter channel creation -
> succesful (outgoing, ooh323c_1)
> 10:45:04:549 Preffered capability at index 0 is
> OO_H263VIDEO. (outgoing, ooh323c_1)
> 10:45:04:549 Using end-point capabilities for
> faststart of setupmessage. (outgoing, ooh323c_1)
> 10:45:04:549 Building olcs with capability
> OO_H263VIDEO. (outgoing, ooh323c_1)
> 10:45:04:549 Building OpenLogicalChannel for
> Receive
> Capability (outgoing, ooh323c_1)
> 10:45:04:549 Adding new media channel for cap 31
> dir
> receive (outgoing, ooh323c_1)
> 10:45:04:549 Adding new channel with cap 31
> (outgoing, ooh323c_1)
> 10:45:04:549 Using configured media info (outgoing,
> ooh323c_1)
> 10:45:04:549 Created new logical channel entry
> (outgoing, ooh323c_1)
> 10:45:04:549 Building reverse olc. (outgoing,
> ooh323c_1)
> 10:45:04:559 Receive channel of type video started
> (outgoing, ooh323c_1)
> 10:45:04:559 FastStart Element = {
> 10:45:04:559 forwardLogicalChannelNumber = {
> 10:45:04:559 1001
> 10:45:04:560 }
> 10:45:04:560 forwardLogicalChannelParameters = {
> 10:45:04:560 dataType = {
> 10:45:04:560 nullData = {
> 10:45:04:561 NULL
> 10:45:04:561 }
> 10:45:04:562 }
> 10:45:04:562 multiplexParameters = {
> 10:45:04:562 none = {
> 10:45:04:563 NULL
> 10:45:04:563 }
> 10:45:04:564 }
> 10:45:04:564 }
> 10:45:04:564 reverseLogicalChannelParameters = {
> 10:45:04:564 dataType = {
> 10:45:04:565 videoData = {
> 10:45:04:565 h263VideoCapability = {
> 10:45:04:566 sqcifMPI = {
> 10:45:04:566 1
> 10:45:04:567 }
> 10:45:04:568 maxBitRate = {
> 10:45:04:568 200
> 10:45:04:569 }
> 10:45:04:592 unrestrictedVector = {
> 10:45:04:593 FALSE
> 10:45:04:593 }
> 10:45:04:594 arithmeticCoding = {
> 10:45:04:595 FALSE
> 10:45:04:596 }
> 10:45:04:596 advancedPrediction = {
> 10:45:04:597 FALSE
> 10:45:04:598 }
> 10:45:04:598 pbFrames = {
> 10:45:04:599 FALSE
> 10:45:04:600 }
> 10:45:04:600
> temporalSpatialTradeOffCapability = {
> 10:45:04:601 FALSE
> 10:45:04:602 }
> 10:45:04:602 errorCompensation = {
> 10:45:04:603 FALSE
> 10:45:04:604 }
> 10:45:04:605 }
> 10:45:04:605 }
> 10:45:04:605 }
> 10:45:04:606 multiplexParameters = {
> 10:45:04:606 h2250LogicalChannelParameters
> =
> {
> 10:45:04:607 sessionID = {
> 10:45:04:607 2
> 10:45:04:608 }
> 10:45:04:608 mediaChannel = {
> 10:45:04:609 unicastAddress = {
> 10:45:04:610 iPAddress = {
> 10:45:04:610 network = {
> 10:45:04:611 '0a790ba2'H
> 10:45:04:612 }
> 10:45:04:613 tsapIdentifier =
> {
> 10:45:04:614 5000
> 10:45:04:615 }
> 10:45:04:616 }
> 10:45:04:617 }
> 10:45:04:617 }
> 10:45:04:618 mediaControlChannel = {
> 10:45:04:618 unicastAddress = {
> 10:45:04:619 iPAddress = {
> 10:45:04:620 network = {
> 10:45:04:621 '0a790ba2'H
> 10:45:04:622 }
> 10:45:04:623 tsapIdentifier =
> {
> 10:45:04:624 5001
> 10:45:04:625 }
> 10:45:04:625 }
> 10:45:04:626 }
> 10:45:04:627 }
> 10:45:04:627 }
> 10:45:04:628 }
> 10:45:04:628 }
> 10:45:04:628 }
> 10:45:04:628 Added RX fs element 1 with capability
> OO_H263VIDEO(outgoing, ooh323c_1)
> 10:45:04:628 Building OpenLogicalChannel for
> transmit
> Capability (outgoing, ooh323c_1)
> 10:45:04:628 Adding new media channel for cap 31
> dir
> transmit (outgoing, ooh323c_1)
> 10:45:04:628 Adding new channel with cap 31
>
=== message truncated ===
__________________________________
Yahoo! FareChase: Search multiple travel sites in one click.
http://farechase.yahoo.com
-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc.
Get Certified Today * Register for a JBoss Training Course
Free Certification Exam for All Training Attendees Through End of 2005
Visit http://www.jboss.com/services/certification for more information
_______________________________________________
ooh323c-devel mailing list
ooh323c-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ooh323c-devel
-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc.
Get Certified Today * Register for a JBoss Training Course
Free Certification Exam for All Training Attendees Through End of 2005
Visit http://www.jboss.com/services/certification for more information
_______________________________________________
ooh323c-devel mailing list
ooh323c-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ooh323c-devel
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic