[prev in list] [next in list] [prev in thread] [next in thread]
List: npaci-rocks-discussion
Subject: [Rocks-Discuss] Trying to add Dell R640 to a Rocks 6.2 cluster, getting "No usable disks have been
From: "Korzennik, Sylvain" <skorzennik () cfa ! harvard ! edu>
Date: 2018-09-08 13:57:09
Message-ID: CAKq17UTrJ74kvQ5TR=Bs=Zm2E2nNs_Pj4bhuYsuv_261f=pqmw () mail ! gmail ! com
[Download RAW message or body]
We run a Rocks 6.2 cluster, that we've upgraded to CentOS 6.9:
# rocks list roll
> NAME VERSION ARCH ENABLED
> ganglia: 6.2 x86_64 yes
> kernel: 6.2 x86_64 yes
> hpc: 6.2 x86_64 yes
> python: 6.2 x86_64 yes
> java: 6.2 x86_64 yes
> bio: 6.2 x86_64 yes
> base: 6.2 x86_64 yes
> perl: 6.2 x86_64 yes
> sge: 6.2 x86_64 yes
> CentOS-6.9: 2018-03-07 x86_64 yes
> Update-CentOS-6.9: 2018-03-16 x86_64 yes
>
When trying to add a Dell R640 w/ two SSD, at boot time (BIOS set to AHCI),
we get
Initializing Serial ATA device
>
> PowerEdge Expandable RAID Controler BIOS
> AH -0 (Bus 24 Dev 0) PERC H740P Mini
> FW package: 50.3.0-1512
>
> 1 Virtual Drive(s) found on the host adapter.
>
> 0 Non-RAID disk(s) handled by BIOS
> 1 Virtual drive(s) handled by BIOS
>
The machine boots up, starts anaconda but then croaks on "No usable disks
have been found."
Dell is telling us to add the driver in
UnifiedDriver_7.703.06.00_RHEL6.tar.gz, namely
kmod-megaraid_sas-07.703.06.00_el6.9-1.x86_64.rpm
I can "rpm -ivh" that module on the frontend (so no compatibility issue),
but it is unclear to me how to add to the distro to activate it when
booting via PXE a new node.
Any hints? Thanks.
[Yes, we need to migrate to Rocks 7, but we're not yet ready]
Cheers,
Sylvain
--
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.sdsc.edu/pipermail/npaci-rocks-discussion/attachments/20180908/cc2bf0ca/attachment.html \
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic