[prev in list] [next in list] [prev in thread] [next in thread]
List: npaci-rocks-discussion
Subject: Re: [Rocks-Discuss] Can't do PXE boot Rocks 5.1
From: Gerry Creager <gerry.creager () tamu ! edu>
Date: 2009-05-30 5:24:34
Message-ID: 4A20C312.5040805 () tamu ! edu
[Download RAW message or body]
Niraj
Remove all nodes. Again. Do a 'rocks sync config' then, reboot the
front-end. Now try to do an insert-ethers again.
gc
Niraj Srivastava wrote:
> Hi Leo,
> Did you find the issue with your cluster? I have the exact same issue as
> you.
> https://lists.sdsc.edu/pipermail/npaci-rocks-discussion/2009-March/03849
> 6.html
>
>
> I removed all the nodes, did sync config and then did insert-ethers
> rocks sync config qmgr obj=compute-0-1 svr=default: Unknown node qmgr
> obj=compute-0-1 svr=default: Unknown node [root@hydra ~]# rocks list
> host
> HOST MEMBERSHIP CPUS RACK RANK COMMENT
> hydra: Frontend 1 0 0 -------
> compute-0-0: Compute 8 0 0 -------
> compute-0-1: Compute 8 0 1 -------
> [root@hydra ~]# rocks list host interface
> HOST SUBNET IFACE MAC IP NETMASK
> GATEWAY MODULE NAME VLANID
> hydra: private eth0 00:23:7d:65:9f:d6 10.1.1.1 255.255.0.0
> -------- bnx2 hydra ------
> hydra: public eth1 00:23:7d:65:9f:d4 10.0.135.20 255.255.0.0
> 10.0.1.1 bnx2 hydra.isc-dev.com ------
> hydra: ------- eth2 00:23:7d:fb:e8:22 ------------ -----------
> -------- e1000e ----------------- ------
> hydra: ------- eth3 00:23:7d:fb:e8:23 ------------ -----------
> -------- e1000e ----------------- ------
> compute-0-0: private eth0 00:23:7d:59:6e:08 10.1.255.254 255.255.0.0
> -------- bnx2 compute-0-0 ------
> compute-0-0: ------- eth1 00:23:7d:59:6e:06 ------------ -----------
> -------- bnx2 ----------------- ------
> compute-0-1: private ----- 00:23:7d:58:5c:58 10.1.255.253 255.255.0.0
> -------- ------ compute-0-1 ------
>
> Niraj
> x5089
>
> -----Original Message-----
> From: Niraj Srivastava
> Sent: Friday, May 29, 2009 5:11 PM
> To: Discussion of Rocks Clusters
> Subject: RE: [Rocks-Discuss] Can't do PXE boot Rocks 5.1
>
>
> -----Original Message-----
> From: npaci-rocks-discussion-bounces@sdsc.edu
> [mailto:npaci-rocks-discussion-bounces@sdsc.edu] On Behalf Of Greg Bruno
> Sent: Friday, May 29, 2009 4:59 PM
> To: Discussion of Rocks Clusters
> Subject: Re: [Rocks-Discuss] Can't do PXE boot Rocks 5.1
>
> On Fri, May 29, 2009 at 12:07 PM, Niraj Srivastava
> <nsrivastava@interactivesupercomputing.com> wrote:
>>
>> [root@hydra rocks]# rocks sync config
>> qmgr obj=pvfs2-compute-0-0 svr=default: Unknown node
>> qmgr obj=pvfs2-compute-0-0 svr=default: Unknown node
>> qmgr obj=compute-0-1 svr=default: Unknown node
>> qmgr obj=compute-0-1 svr=default: Unknown node
>> qmgr obj=pvfs2-compute-0-1 svr=default: Unknown node
>> qmgr obj=pvfs2-compute-0-1 svr=default: Unknown node
>> qmgr obj=compute-0-3 svr=default: Unknown node
>> qmgr obj=compute-0-3 svr=default: Unknown node
>> qmgr obj=compute-0-4 svr=default: Unknown node
>> qmgr obj=compute-0-4 svr=default: Unknown node
>> qmgr obj=compute-0-5 svr=default: Unknown node
>> qmgr obj=compute-0-5 svr=default: Unknown node
>> qmgr obj=compute-0-6 svr=default: Unknown node
>> qmgr obj=compute-0-6 svr=default: Unknown node
>> qmgr obj=compute-0-7 svr=default: Unknown node
>> qmgr obj=compute-0-7 svr=default: Unknown node
>
> ok, i'd try:
>
> # rocks remove host compute-0-1 compute-0-2 compute-0-3
> compute-0-4 compute-0-5 compute-0-6 compute-0-7 pvfs2-compute-0-0
> pvfs2-compute-0-1
>
> # rocks sync config
>
> then:
>
> # insert-ethers
>
> select 'Compute' as the appliance type, then PXE boot compute-0-1.
> after compute-0-1 is discovered, then PXE boot compute-0-2, etc.
>
> - gb
>
> Tried that and no go :(
--
Gerry Creager -- gerry.creager@tamu.edu
Texas Mesonet -- AATLT, Texas A&M University
Cell: 979.229.5301 Office: 979.458.4020 FAX: 979.862.3983
Office: 1700 Research Parkway Ste 160, TAMU, College Station, TX 77843
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic