[prev in list] [next in list] [prev in thread] [next in thread] 

List:       novell
Subject:    ZFD4 error creating image
From:       Mark Perlstein <markperl () earthlink ! net>
Date:       2003-03-27 21:27:55
[Download RAW message or body]

When trying to create a manual image, ZW imaging engine fails with "Failed 
to write to proxy."

Had previously tested ZFD4 boot CD and process without hiccups on an out of 
the box WinXP PC...worked like a champ.

Setup a another PC's hard drive to our specs and process failed with the 
above message. The imaging engine sits for about 15 minutes with 
"Determining amount of data on partition(s)", then the red progress bar 
appears for awhile before the error message appears.

Moved the hard drive to the machine that was used for the first test, so as 
to rule out any hardware or network comm issues.

ZlmgLog.xml shows nothing at all for the failed session, although other 
successful create sessions and fat fingering errors are shown.

There is plenty of space on the destination server.

The imgserv.dlm is running...can concurrently create an image from another 
vanilla PC.

PC's are new Compaq Evo D510s' with WinXP.

Server is Win2K Adv Server with eDir 8.7, NAM 3.0 along with AD.

It would appear that some thing was done while "customizing" the PC before 
trying to create the image, but ??????

Any thoughts?

Thanks

Mark

_______________________________________________
Novell mailing list
Novell@netlab1.usu.edu
http://netlab1.usu.edu/mailman/listinfo/novell
[prev in list] [next in list] [prev in thread] [next in thread]