[prev in list] [next in list] [prev in thread] [next in thread]
List: newtontalk
Subject: Re: [NTLK] USB to Newton Interconnect cables
From: David Arnold <davida () pobox ! com>
Date: 2016-02-11 10:42:42
Message-ID: F057BC63-006F-4234-90E2-A6B6471A9A03 () pobox ! com
[Download RAW message or body]
> On 11 Feb 2016, at 08:39, Matthias Melcher <mm@matthiasm.com> wrote:
>
> Sorry, again, late to the game. A few thoughts, if I may:
>
> * Use the "normal" port. If you use the modem port or the keyboard port, users will \
> have to get software onto their machine to use you cable, but need your cable to \
> get software on it. Back to the hen-and-egg problem at least for ne users.
I agree.
> * If you use and FTDI, adding a differential driver is not a huge problem, and \
> increases transmission quality greatly
Not that it should matter for the likely <5cm distance it'll need to travel from \
driver to driver, but still.
> * Remember "slowdown.exe" on Windows machines? NewtonOS has a bug that misses bytes \
> on the serial port if the timing is different from the old Mac connections. Before \
> you order PCBs, make sure that your boards manage to get the timing right, and \
> large packets transfer well, and you can create and restore backups (the most \
> demanding serial port action).
I'll definitely give the prototypes a workout.
> Hope that helps. Much success!
Thanks!
d
----------------------------------------------------------------------
http://newtontalk.net/
http://twitter.com/newtontalk
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic