[prev in list] [next in list] [prev in thread] [next in thread]
List: netbsd-tech-net
Subject: Re: connection/channel oriented network protocol
From: Johan Rydberg <johan.rydberg () netinsight ! se>
Date: 2000-05-18 11:34:57
[Download RAW message or body]
Michael Richardson wrote:
>
> >>>>> "Johan" == Johan Rydberg <johan.rydberg@netinsight.se> writes:
> Johan> I will implementing a network protocol stack in NetBSD 1.4.2,
> Johan> and want to have some points where I should start.
>
> Johan> The network technology is channel (and connection) oriented.
> Johan> To be able to send any data on the network, a channel has to
> Johan> be created first.
>
> Johan> When creating a channel alot of information has to be specified,
> Johan> such as the bandwidth and destination host. This data must be
> Johan> supplied to the device driver.
>
> It seems to me that you ought to create a new sockaddr* type to store
> all of this and that you should use them in the connect()/bind() calls.
> If you need to change things mid-stream, then setsockopt() would be
> appropriate.
As it is now, I have created a new IF structure that holds all
information
that both the device driver and the protocol needs.
> What is your specific media that you are targetting?
DTM (Dynamic synchronous Transfer Mode). With words, you can say it's a
mix
between ATM and SDH. For more info, see http://www.opendtm.org/
--
Johan Rydberg johan.rydberg@netinsight.net
Net Insight AB, Sweden direct: +46-8-685 04 17
http://www.netinsight.net phone: +46-8-685 04 00
fax: +46-8-685 04 20
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic