[prev in list] [next in list] [prev in thread] [next in thread]
List: netbsd-port-mac68k
Subject: WSFB & NuBus graphic devices
From: Romain Dolbeau <romain () dolbeau ! org>
Date: 2022-08-30 12:14:55
Message-ID: CADuzgbrjZF_NBp0GLu+DPCVTghJMydycrrfvq5_UJ=BkRe3TGw () mail ! gmail ! com
[Download RAW message or body]
(fixed the title as well, it's 'ws' not 'sw' ...)
Le dim. 28 août 2022 à 18:14, Romain Dolbeau <romain@dolbeau.org> a écrit :
> (d) The system boots fine and I can use it via ssh, and I see the color console (with
> the green-then-black text), but I never get a 'login' prompt ; nothing is displayed
> after the date. If I type, it appears properly on the console. I _think_ something
> is displayed on the secondary/internal, but with the messed-up resolution:depth
> it's just noise at the top. It could be the login prompt, but I don't know (the getty
> is running).
Turns out
- if I manual force the resolution/depth on the internal/secondary
screen, I see the login prompt there;
- wsdisplay0 is the internal/secondary and wsdisplay1 my device/primary;
- If I force wsdisplay0 to be on my device by changing the kernel wsfb
config to:
(...)
wsdisplay0 at wsemuldisplaydev1 console 1
wsdisplay* at wsemuldisplaydev?
(....)
Adding the first of those two lines, then I get a working prompt on my
device/primary.
Now, to figure out if adding acceleration is going to be similar to
what I have in NetBSD/spar ...
Cordially,
--
Romain Dolbeau
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic