[prev in list] [next in list] [prev in thread] [next in thread]
List: netbsd-port-mac68k
Subject: Re: quadra650
From: Hauke Fath <hauke () Espresso ! Rhein-Neckar ! DE>
Date: 2003-09-27 21:08:29
[Download RAW message or body]
At 21:13 Uhr +0200 27.9.2003, pancake wrote:
>I have a quadra650, with macos7.5 installed. [...]
>
>I put miniaui-rj45 to the quadra650 and plug it to the LAN. In the NetBSD
>gateway of my LAN and the linux laptop I have already installed and
>configured afpd, atalkd...
If the Quadra has enough memory, you should get OpenTransport 1.3.
Make sure you have the correct interface selected (iirc, there is a control
panel called 'Network' or somesuch) -- you want Ethernet/EtherTalk, not the
printer port.
If you can, set up a dhcp server in the network, then the MacOS setup gets
easier. On the other hand, you'd need the MAC address of the Mac, first
(option-click somewhere in the MacTCP panel).
Can you see anything in the chooser?
>I use macTCP to configure their IP: 192.168.0.33 but I cannot ping it :/
Can you give details about the MacTCP setup, please?
>mac doesn't have any more utility to confiure it's network.
Yep. AppleTalk "just works".
>I couldnt reinstall macos7.5 because I couldn't dump the disk images using
>a PC :/
Shouldn't be necessary. This is not Windows(tm).
hauke
--
/~\ The ASCII Ribbon Campaign
\ / No HTML/RTF in email
X No Word docs in email
/ \ Respect for open standards
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic