[prev in list] [next in list] [prev in thread] [next in thread] 

List:       netbsd-port-arm
Subject:    Re: Painfully slow boot on RockPro64 with NetBSD-daily/netbsd-10/202308250610Z
From:       joelp () sdf ! org
Date:       2023-09-04 16:14:27
Message-ID: Pine.NEB.4.64.2309041613270.6548 () sdf ! org
[Download RAW message or body]


Hi -- the last time I'm certain I booted with a keyboard attached was a 
release version of netbsd-9.3, which worked fine.

Unfortunately, the first time I installed netbsd-10 I don't recall having 
a keyboard attached and I used a serial console to complete the setup, but 
I can't be certain. I'm sorry I don't have an efiboot version/date for 
that first netbsd-10 installation, but I can put my netbsd-10 build date I 
used roughly first week of June.

I repro'd again by plugging a USB keyboard into a USB2 and allowed it to 
complete the slow part (roughly 9-10 minutes) where I see this message:

Not doing usb_stop().
[   1.0000000] NetBSD/evbarm (fdt) booting ...

Thanks - Joel


On Mon, 4 Sep 2023, Rin Okuyama wrote:

> Date: Mon, 4 Sep 2023 17:36:31 +0900
> From: Rin Okuyama <rokuyama.rk@gmail.com>
> To: joelp@sdf.org, port-arm@netbsd.org
> Subject: Re: Painfully slow boot on RockPro64 with
>     NetBSD-daily/netbsd-10/202308250610Z
> 
> Hi,
>
> Seems like something wrong in EFI routines provided by U-boot.
> (polling for ehci devices may cause error and timed out?)
>
> IIRC, efiboot for aarch64 on netbsd-10 branch did not receive
> updates recently. Do you remember which version/date of efiboot
> was working without this problem?
>
> Thanks,
> rin
>
> On 2023/08/27 10:40, joelp@sdf.org wrote:
>> 
>> Mitigated, but I don't understand why (will try to figure out):
>> I had my USB keyboard connected to a USB 2 port. Moving that to the Type-A 
>> USB 3 port eliminates the terribly slow boot process.
>> 
>> I just wanted to update quickly that this is nothing too interesting. I 
>> also have a serial console connected and don't really need HDMI + USB 
>> keyboard.
>> 
>> 
>> On Sat, 26 Aug 2023, joelp@sdf.org wrote:
>> 
>>> Date: Sat, 26 Aug 2023 20:40:09 +0000 (UTC)
>>> From: joelp@sdf.org
>>> To: port-arm@netbsd.org
>>> Subject: Painfully slow boot on RockPro64 with
>>>        NetBSD-daily/netbsd-10/202308250610Z
>>> 
>>> 
>>> I wanted to rebuild my RockPro64 and but my build machine is temporarily 
>>> down, and so I pulled down 2023-08-25 daily. During boot, the CPU clock 
>>> speed appears to be painfully slow. Here is a screen copy that shows where 
>>> I see very slow kernel load, where I pressed space to see if it was locked 
>>> (was not), and then typed boot:
>>> 
>>>   \\-__,------,___.
>>>    \\               __,---`   NetBSD/evbarm efiboot (arm64)
>>>      \\             `---,_.   Revision 2.13 (Wed Aug 23 18:21:39 UTC 2023)
>>>        \\-,_____,.---`
>>>          \\
>>>            \\
>>>              \\
>>> 
>>> Press return to boot now, any other key for boot prompt
>>> booting netbsd - starting in 5 seconds.
>>> 0 seconds.
>>>> 
>>>> boot
>>> boot
>>> 8551984+3670808+4179424+1742096 [588013+1181904+707743]=0x1603460
>>> [     1.0000000] NetBSD/evbarm (fdt) booting ...
>>> 
>>> 
>>> The "...starting in 5 seconds." sits there for more then 5 seconds before 
>>> it counts down to 4, for example. It's brutal.
>>> 
>>> Once past this, things are speedy as usual.
>>> 
>>> Is there a boot setting that can speed this up?
>>> 
>>> On previous builds, I noticed the 5 second count down was actually faster 
>>> (as if it was too fast).
>>> 
>>> Thanks - Joel
>>> 
>>> More of dmesg:
>>> 
>>> [     1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 
>>> 2003,
>>> [     1.0000000]         2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 
>>> 2012, 2013,
>>> [     1.0000000]         2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 
>>> 2022, 2023
>>> [     1.0000000]         The NetBSD Foundation, Inc.   All rights 
>>> reserved.
>>> [     1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
>>> [     1.0000000]         The Regents of the University of California.   
>>> All rights reserved.
>>> 
>>> [     1.0000000] NetBSD 10.0_BETA (GENERIC64) #0: Wed Aug 23 18:21:39 UTC 
>>> 2023
>>> [     1.0000000] 
>>> mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/evbarm/compile/GENERIC64
>>> [     1.0000000] total memory = 3937 MB
>>> [     1.0000000] avail memory = 3795 MB
>>> [     1.0000000] entropy: ready
>>> [     1.0000000] armfdt0 (root)
>>> [     1.0000000] simplebus0 at armfdt0: Pine64 RockPro64 v2.1
>>> [     1.0000000] cpus0 at simplebus0
>>> [     1.0000000] psci0 at simplebus0: PSCI 1.1
>>> [     1.0000000] simplebus1 at simplebus0
>>> [     1.0000000] cpu0 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x0
>>> [     1.0000000] cpu0: package 0, core 0, smt 0
>>> [     1.0000000] cpufreqdt0 at cpu0
>>> [     1.0000000] cpu1 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x1
>>> [     1.0000000] cpu1: package 0, core 1, smt 0
>>> [     1.0000000] cpufreqdt1 at cpu1
>>> [     1.0000000] cpu2 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x2
>>> [     1.0000000] cpu2: package 0, core 2, smt 0
>>> [     1.0000000] cpufreqdt2 at cpu2
>>> [     1.0000000] cpu3 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x3
>>> [     1.0000000] cpu3: package 0, core 3, smt 0
>>> [     1.0000000] cpufreqdt3 at cpu3
>>> [     1.0000000] cpu4 at cpus0: Arm Cortex-A72 r0p2 (v8-A), id 0x100
>>> [     1.0000000] cpu4: package 1, core 0, smt 0
>>> [     1.0000000] cpufreqdt4 at cpu4
>>> [     1.0000000] cpu5 at cpus0: Arm Cortex-A72 r0p2 (v8-A), id 0x101
>>> [     1.0000000] cpu5: package 1, core 1, smt 0
>>> [     1.0000000] cpufreqdt5 at cpu5
>>> [     1.0000000] gicvthree0 at simplebus0: GICv3
>>> [     1.0000000] gicvthree0: ITS [#0] Devices table @ 0x271000/0x80000, 
>>> Non-cacheable, Non-shareab
>>> le
>>> [     1.0000000] syscon0 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon1 at simplebus0: System Controller Registers
>>> [     1.0000000] fclock0 at simplebus0: 125000000 Hz fixed clock 
>>> (clkin_gmac)
>>> [     1.0000000] syscon2 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon3 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon4 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon5 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon6 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon7 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon8 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon9 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon10 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon11 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon12 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon13 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon14 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon15 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon16 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon17 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon18 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon19 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon20 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon21 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon22 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon23 at simplebus0: System Controller Registers
>>> [     1.0000000] fclock1 at simplebus0: 24000000 Hz fixed clock (xin24m)
>>> [     1.0000000] syscon24 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon25 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon26 at simplebus0: System Controller Registers
>>> [     1.0000000] syscon27 at simplebus0: System Controller Registers
>>> [     1.0000000] rkcru0 at simplebus0: RK3399 CRU
>>> [     1.0000000] rkcru1 at simplebus0: RK3399 PMU CRU
>>> [     1.0000000] gtmr0 at simplebus0: Generic Timer
>>> [     1.0000000] gtmr0: interrupting on GICv3 irq 27
>>> [     1.0000000] armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual)
>>> [     1.0000040] rkiomux0 at simplebus0: RK3399 IOMUX control
>>> [     1.0000040] rkgpio0 at rkiomux0: GPIO (gpio0@ff720000)
>>> [     1.0000040] gpio0 at rkgpio0: 32 pins
>>> [     1.0000040] rkgpio1 at rkiomux0: GPIO (gpio1@ff730000)
>>> [     1.0000040] gpio1 at rkgpio1: 32 pins
>>> [     1.0000040] rkgpio2 at rkiomux0: GPIO (gpio2@ff780000)
>>> [     1.0000040] gpio2 at rkgpio2: 32 pins
>>> [     1.0000040] rkgpio3 at rkiomux0: GPIO (gpio3@ff788000)
>>> [     1.0000040] gpio3 at rkgpio3: 32 pins
>>> [     1.0000040] rkgpio4 at rkiomux0: GPIO (gpio4@ff790000)
>>> [     1.0000040] gpio4 at rkgpio4: 32 pins
>>> [     1.0000040] rkpwm0 at simplebus0: PWM
>>> [     1.0000040] rkpwm1 at simplebus0: PWM
>>> [     1.0000040] rkpwm2 at simplebus0: PWM
>>> [     1.0000040] rkiic0 at simplebus0: Rockchip I2C (400000 Hz)
>>> [     1.0000040] iic0 at rkiic0: I2C bus
>>> [     1.0000040] rkpmic0 at iic0 addr 0x1b: RK808 Power Management and 
>>> Real Time Clock IC
>>> [     1.0000040] rkreg0 at rkpmic0: vdd_center
>>> [     1.0000040] rkreg1 at rkpmic0: vdd_cpu_l
>>> [     1.0000040] rkreg2 at rkpmic0: vcc_ddr
>>> [     1.0000040] rkreg3 at rkpmic0: vcc_1v8
>>> [     1.0000040] rkreg4 at rkpmic0: vcc1v8_dvp
>>> [     1.0000040] rkreg5 at rkpmic0: vcc3v0_touch
>>> [     1.0000040] rkreg6 at rkpmic0: vcca_1v8
>>> [     1.0000040] rkreg7 at rkpmic0: vcc_sdio
>>> [     1.0000040] rkreg8 at rkpmic0: vcca3v0_codec
>>> [     1.0000040] rkreg9 at rkpmic0: vcc_1v5
>>> [     1.0000040] rkreg10 at rkpmic0: vcca1v8_codec
>>> [     1.0000040] rkreg11 at rkpmic0: vcc_3v0
>>> [     1.0000040] rkreg12 at rkpmic0: vcc3v3_s3
>>> [     1.0000040] rkreg13 at rkpmic0: vcc3v3_s0
>>> [     1.0000040] fan53555reg0 at iic0 addr 0x40: Silergy SYR82X
>>> [     1.0000040] fan53555reg1 at iic0 addr 0x41: Silergy SYR82X
>>> [     1.0000040] fregulator0 at simplebus0: vcc12v_dcin
>>> [     1.0000040] fregulator1 at simplebus0: vcc3v3_pcie
>>> [     1.0000040] fregulator2 at simplebus0: vcc3v0_sd
>>> [     1.0000040] fregulator3 at simplebus0: vcc1v8_s3
>>> [     1.0000040] fregulator4 at simplebus0: vcc3v3_sys
>>> [     1.0000040] fregulator5 at simplebus0: vcc5v0_sys
>>> [     1.0000040] fregulator6 at simplebus0: vcc5v0_typec
>>> [     1.0000040] fregulator7 at simplebus0: vcc5v0_host
>>> [     1.0000040] rkiic1 at simplebus0: Rockchip I2C (100000 Hz)
>>> [     1.0000040] iic1 at rkiic1: I2C bus
>>> [     1.0000040] es8316ac0 at iic1 addr 0x11: Everest Semi ES8316 Audio 
>>> CODEC
>>> [     1.0000040] rkiic2 at simplebus0: Rockchip I2C (100000 Hz)
>>> [     1.0000040] iic2 at rkiic2: I2C bus
>>> [     1.0000040] fregulator8 at simplebus0: vcc5v0_usb
>>> [     1.0000040] com0 at simplebus0: DesignWare APB UART, 64-byte FIFO
>>> [     1.0000040] com0: interrupting on GICv3 irq 131
>>> [     1.0000040] com1 at simplebus0: DesignWare APB UART, 64-byte FIFO
>>> [     1.0000040] com1: console
>>> [     1.0000040] com1: interrupting on GICv3 irq 132
>>> [     1.0000040] rkiic3 at simplebus0: Rockchip I2C (100000 Hz)
>>> [     1.0000040] iic3 at rkiic3: I2C bus
>>> [     1.0000040] typec-portc (fcs,fusb302) at iic3 addr 0x22 not 
>>> configured
>>> [     1.0000040] pregulator0 at simplebus0: vdd_log
>>> [     1.0000040] mmcpwrseq0 at simplebus0: Simple MMC power sequence 
>>> provider
>>> [     1.0000040] rkdrm0 at simplebus0
>>> [     1.0000040] rkpciephy0 at syscon0: RK3399 PCIe PHY
>>> [     1.0000040] rkusb0 at syscon0: USB2 PHY
>>> [     1.0000040] rkusbphy0 at rkusb0: USB2 host port
>>> [     1.0000040] rkusbphy1 at rkusb0: USB2 OTG port
>>> [     1.0000040] rkusb1 at syscon0: USB2 PHY
>>> [     1.0000040] rkusbphy2 at rkusb1: USB2 host port
>>> [     1.0000040] rkusbphy3 at rkusb1: USB2 OTG port
>>> [     1.0000040] /opp-table0 at simplebus0 not configured
>>> [     1.0000040] /opp-table1 at simplebus0 not configured
>>> [     1.0000040] rkvop0 at simplebus0: RK3399 VOPL
>>> [     1.0000040] rkvop0: interrupting on GICv3 irq 151
>>> [     1.0000040] rkvop1 at simplebus0: RK3399 VOPB
>>> [     1.0000040] rkvop1: interrupting on GICv3 irq 150
>>> [     1.0000040] rkpcie0 at simplebus0: RK3399 PCIe
>>> [     1.0000040] rkpcie0: link training timeout (link_st 0)
>>> [     1.0000040] /power-management@ff310000/power-controller at syscon1 
>>> not configured
>>> [     1.0000040] rkemmcphy0 at syscon0: eMMC PHY
>>> [     1.0000040] /phy@ff7c0000 at simplebus0 not configured
>>> [     1.0000040] /phy@ff800000 at simplebus0 not configured
>>> [     1.0000040] rki2s0 at simplebus0: I2S/PCM controller
>>> [     1.0000040] rki2s0: interrupting on GICv3 irq 72
>>> [     1.0000040] /dma-controller@ff6e0000 at simplebus0 not configured
>>> [     1.0000040] /dma-controller@ff6d0000 at simplebus0 not configured
>>> [     1.0000040] rktsadc0 at simplebus0: RK3399 Temperature Sensor ADC
>>> [     1.0000040] rktsadc0: interrupting on GICv3 irq 129
>>> [     1.0000040] /gpu@ff9a0000 at simplebus0 not configured
>>> [     1.0000040] /iommu@ff650800 at simplebus0 not configured
>>> [     1.0000040] /iommu@ff660480 at simplebus0 not configured
>>> [     1.0000040] sdhc0 at simplebus0: Arasan SDHCI controller
>>> [     1.0000040] sdhc0: interrupting on GICv3 irq 43
>>> [     1.0000040] sdhc0: SDHC 3.0, rev 16, 32-bit ADMA2, 200000 kHz, 
>>> embedded slot, HS SDR50 DDR50
>>> SDR104 HS200 1.8V, re-tuning mode 1, 1024 byte blocks
>>> [     1.0000040] sdmmc0 at sdhc0 slot 0
>>> [     1.0000040] spdiftx0 at simplebus0: SPDIF transmitter
>>> [     1.0000040] /iommu@ff8f3f00 at simplebus0 not configured
>>> [     1.0000040] dwhdmi0 at simplebus0: HDMI TX
>>> [     1.0000040] dwhdmi0: version 2.11a, phytype 0xf3
>>> [     1.0000040] /iommu@ff903f00 at simplebus0 not configured
>>> [     1.0000040] /iommu@ff914000 at simplebus0 not configured
>>> [     1.0000040] rki2s1 at simplebus0: I2S/PCM controller
>>> [     1.0000040] rki2s1: interrupting on GICv3 irq 73
>>> [     1.0000040] /opp-table2 at simplebus0 not configured
>>> [     1.0000040] awge0 at simplebus0: GMAC
>>> [     1.0000040] awge0: Core version: 00001035
>>> [     1.0000040] awge0: Ethernet address 26:80:27:df:b6:ae
>>> [     1.0000040] awge0: HW feature mask: d0f17
>>> [     1.0000040] rgephy0 at awge0 phy 0: RTL8211F 1000BASE-T media 
>>> interface
>>> [     1.0000040] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 
>>> 1000baseT-FDX, auto
>>> [     1.0000040] rgephy1 at awge0 phy 1: RTL8211F 1000BASE-T media 
>>> interface
>>> [     1.0000040] rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 
>>> 1000baseT-FDX, auto
>>> [     1.0000040] awge0: interrupting on GICv3 irq 44
>>> [     1.0000040] dwcmmc0 at simplebus0: DesignWare SD/MMC
>>> [     1.0000040] dwcmmc0: interrupting on GICv3 irq 96
>>> [     1.0000040] dwcmmc1 at simplebus0: DesignWare SD/MMC
>>> [     1.0000040] dwcmmc1: interrupting on GICv3 irq 97
>>> [     1.0000040] ehci0 at simplebus0: EHCI
>>> [     1.0000040] ehci0: interrupting on GICv3 irq 58
>>> [     1.0000040] ehci0: 1 companion controller, 1 port
>>> [     1.0000040] ehci0: Using DMA subregion for control data structures
>>> [     1.0000040] usb0 at ehci0: USB revision 2.0
>>> [     1.0000040] ohci0 at simplebus0: OHCI
>>> [     1.0000040] ohci0: interrupting on GICv3 irq 60
>>> [     1.0000040] ohci0: OHCI version 1.0
>>> [     1.0000040] usb1 at ohci0: USB revision 1.0
>>> [     1.0000040] ehci1 at simplebus0: EHCI
>>> [     1.0000040] ehci1: interrupting on GICv3 irq 62
>>> [     1.0000040] ehci1: 1 companion controller, 1 port
>>> [     1.0000040] ehci1: Using DMA subregion for control data structures
>>> [     1.0000040] usb2 at ehci1: USB revision 2.0
>>> [     1.0000040] ohci1 at simplebus0: OHCI
>>> [     1.0000040] ohci1: interrupting on GICv3 irq 64
>>> [     1.0000040] ohci1: OHCI version 1.0
>>> [     1.0000040] usb3 at ohci1: USB revision 1.0
>>> [     1.0000040] xhci0 at simplebus0: DesignWare USB3 XHCI (rev. 3.00a)
>>> [     1.0000040] xhci0: interrupting on GICv3 irq 137
>>> [     1.0000040] usb4 at xhci0: USB revision 3.0
>>> [     1.0000040] usb5 at xhci0: USB revision 2.0
>>> [     1.0000040] xhci1 at simplebus0: DesignWare USB3 XHCI (rev. 3.00a)
>>> [     1.0000040] xhci1: interrupting on GICv3 irq 142
>>> [     1.0000040] usb6 at xhci1: USB revision 3.0
>>> [     1.0000040] usb7 at xhci1: USB revision 2.0
>>> [     1.0000040] /saradc@ff100000 at simplebus0 not configured
>>> [     1.0000040] rkspi0 at simplebus0: SPI
>>> [     1.0000040] rkspi0: interrupting on GICv3 irq 85
>>> [     1.0000040] spi0 at rkspi0: SPI bus
>>> [     1.0000040] m25p0 at spi0 slave 0
>>> [     1.0000040] /syscon@ff320000/io-domains at syscon23 not configured
>>> [     1.0000040] /video-codec@ff650000 at simplebus0 not configured
>>> [     1.0000040] /video-codec@ff660000 at simplebus0 not configured
>>> [     1.0000040] /rga@ff680000 at simplebus0 not configured
>>> [     1.0000040] /efuse@ff690000 at simplebus0 not configured
>>> [     1.0000040] /syscon@ff770000/io-domains at syscon0 not configured
>>> [     1.0000040] /rktimer@ff850000 at simplebus0 not configured
>>> [     1.0000040] rki2s2 at simplebus0: I2S/PCM controller
>>> [     1.0000040] rki2s2: interrupting on GICv3 irq 71
>>> [     1.0000040] /iommu@ff924000 at simplebus0 not configured
>>> [     1.0000040] ausoc0 at simplebus0: hdmi-sound
>>> [     1.0000040] gpioleds0 at simplebus0: work diy
>>> [     1.0000040] pwmfan0 at simplebus0: couldn't get 'cooling-levels' 
>>> property
>>> [     1.0000040] rkv1crypto0 at simplebus0: Crypto v1
>>> [     1.0000040] armpmu0 at simplebus0: Performance Monitor Unit
>>> [     1.0000040] armpmu1 at simplebus0: Performance Monitor Unit
>>> [     1.0000040] dwcwdt0 at simplebus0: DesignWare Watchdog Timer
>>> [     1.0000040] dwcwdt0: default watchdog period is 15 seconds
>>> [     1.0000040] gpiokeys0 at simplebus0: GPIO Key Power
>>> [     1.0000040] /ir-receiver at simplebus0 not configured
>>> [     1.0000040] /sound at simplebus0 not configured
>>> [     1.0000040] /sound-dit at simplebus0 not configured
>>> [     1.0000040] rkdrm0: reserved 40 MB DRAM for CMA
>>> [     1.0000040] rkfb0 at rkdrm0
>>> [     1.0000040] [drm] Supports vblank timestamp caching Rev 2 
>>> (21.10.2013).
>>> [     1.0000040] [drm] No driver support for vblank timestamp query.
>>> [     1.0000040] [drm] Initialized rk 1.0.0 20191109 for rkdrm0 on minor 0
>>> [     1.0000040] rkdrm0: initialized rk 1.0.0 20191109 on minor 0
>>> [     1.0000040] warning: 
>>> /usr/src/sys/external/bsd/drm2/dist/drm/drm_atomic_helper.c:1497: [CRTC:
>>> 33:crtc-0] vblank wait timed out
>>> [     1.0000040] wsdisplay0 at rkfb0 kbdmux 1: console (default, vt100 
>>> emulation)
>>> [     1.0000040] ausoc0: codec: dwhdmi0, cpu: rki2s1
>>> [     1.0000040] audio0 at ausoc0: playback, capture, full duplex
>>> [     1.0000040] audio0: slinear_le:16 -> slinear_le:16 2ch 48000Hz, blk 
>>> 1920 bytes (10ms) for pla
>>> yback
>>> [     1.0000040] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) 
>>> for recording
>>> [     1.0000040] spkr0 at audio0: PC Speaker (synthesized)
>>> [     1.0000040] wsbell at spkr0 not configured
>>> [     2.5668631] cpufreqdt0: rate: 1416.000 MHz, 1125000 uV
>>> [     2.5868644] cpufreqdt4: rate: 1800.000 MHz, 1200000 uV
>>> [     2.5968633] sdmmc1 at dwcmmc0
>>> [     2.5968633] sdmmc2 at dwcmmc1
>>> [     2.6468640] uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), 
>>> class 9/0, rev 2.00/1.00,
>>> addr 1
>>> [     2.6468640] uhub1 at usb4: NetBSD (0x0000) xHCI root hub (0x0000), 
>>> class 9/0, rev 3.00/1.00,
>>> addr 0
>>> [     2.6568650] uhub2 at usb5: NetBSD (0x0000) xHCI root hub (0x0000), 
>>> class 9/0, rev 2.00/1.00,
>>> addr 0
>>> [     2.6568650] uhub3 at usb6: NetBSD (0x0000) xHCI root hub (0x0000), 
>>> class 9/0, rev 3.00/1.00,
>>> addr 0
>>> [     2.6568650] uhub4 at usb7: NetBSD (0x0000) xHCI root hub (0x0000), 
>>> class 9/0, rev 2.00/1.00,
>>> addr 0
>>> [     2.6668651] m25p0: JEDEC ID mfgid:0xC8, devid:0x4018
>>> [     2.6668651] spiflash0 at m25p0: GigaDevice 25Q127CSIG SPI flash
>>> [     2.6668651] spiflash0: 16384 KB, 256 sectors of 64 KB each
>>> [     2.6768660] uhub5 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), 
>>> class 9/0, rev 1.00/1.00,
>>> addr 1
>>> [     2.6768660] uhub6 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), 
>>> class 9/0, rev 2.00/1.00,
>>> addr 1
>>> [     2.6768660] uhub7 at usb3: NetBSD (0x0000) OHCI root hub (0x0000), 
>>> class 9/0, rev 1.00/1.00,
>>> addr 1
>>> [     2.6868667] armpmu1: interrupting on GICv3 irq 23
>>> [     2.6868667] armpmu0: couldn't initialise PMU event counter[ 
>>> 2.7868678] sdmmc1: couldn't ena
>>> ble card: 60
>>> [     3.9668943] sdhc0: timeout waiting for mask 0x3 value 0 
>>> (state=0x1fff0a06)
>>> [     3.9768944] sdhc0: command or data phase inhibited
>>> [     3.9868950] sdhc0: tuning did not complete, using fixed sampling 
>>> clock
>>> [     3.9868950] ehci0: handing over low speed device on port 1 to 
>>> companion controller
>>> [     3.9968957] ld0 at sdmmc0: <0x45:0x0100:DA4064:0x00:0x1c96c945:0x000>
>>> [     3.9968957] ld0: 59640 MB, 7603 cyl, 255 head, 63 sec, 512 bytes/sect 
>>> x 122142720 sectors
>>> [     3.9968957] dk0 at ld0: "EFI", 163840 blocks at 32768, type: msdos
>>> [     3.9968957] dk1 at ld0: "netbsd-root", 121937920 blocks at 196608, 
>>> type: ffs
>>> [     3.9968957] ld0: 8-bit width, HS200, 4096 KB cache, 200.000 MHz
>>> [     5.0569185] uhidev0 at uhub5 port 1 configuration 1 interface 0
>>> [     5.0569185] uhidev0: SEM (0x1a2c) USB Keyboard (0x506f), rev 
>>> 1.10/1.11, addr 2, iclass 3/1
>>> [     5.0669186] ukbd0 at uhidev0
>>> [     5.0669186] wskbd0 at ukbd0: console keyboard, using wsdisplay0
>>> [     5.0669186] uhidev1 at uhub5 port 1 configuration 1 interface 1
>>> [     5.0669186] uhidev1: SEM (0x1a2c) USB Keyboard (0x506f), rev 
>>> 1.10/1.11, addr 2, iclass 3/0
>>> [     5.0869200] uhidev1: 2 report ids
>>> [     5.0869200] uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
>>> [     5.0869200] uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
>>> [     9.1270052] uhub4: device problem, disabling port 1
>>> [     9.1270052] swwdog0: software watchdog initialized
>>> [     9.1370059] WARNING: 6 errors while detecting hardware; check system 
>>> log.
>>> [     9.1370059] boot device: dk1
>>> [     9.1370059] root on dk1
>>> [     9.1370059] root file system type: ffs
>>> [     9.1370059] kern.module.path=/stand/evbarm/10.0/modules
>>> Sat Aug 26 13:27:24 PDT 2023
>>> 
>> 
>> joelp@sdf.org
>> SDF Public Access UNIX System - https://sdf.org
>> 
>

joelp@sdf.org
SDF Public Access UNIX System - https://sdf.org

[prev in list] [next in list] [prev in thread] [next in thread]