[prev in list] [next in list] [prev in thread] [next in thread]
List: netbsd-port-arm
Subject: Re: Banana pi pro no video
From: Jason Thorpe <thorpej () me ! com>
Date: 2019-06-20 15:25:39
Message-ID: 44CC79FB-46BE-45B7-B2D3-DF0794DD9F77 () me ! com
[Download RAW message or body]
> On Jun 20, 2019, at 5:24 PM, Ron Georgia <netverbs@gmail.com> wrote:
>
> Whoo hoo! I updated my pkgsrc, make install u-boot for bananapro and BAM! Video \
> works! And I see my external drive:
Great!
>
> shareverbs$ dmesg | grep wd
> [ 1.000006] sunxiwdt0 at simplebus1: Watchdog
> [ 1.000006] sunxiwdt0: default watchdog period is 16 seconds
> [ 3.087096] wd0 at atabus0 drive 0
> [ 3.097681] wd0: <Hitachi HUA723030ALA640>
> [ 3.097681] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
> [ 3.097681] wd0: 2794 GB, 5814021 cyl, 16 head, 63 sec, 512 bytes/sect x \
> 5860533168 sectors [ 3.157683] wd0: GPT GUID: \
> f4c18c62-462d-416b-874b-1e76c3cd201c [ 3.167685] wd0: drive supports PIO mode \
> 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO [ \
> 3.167685] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 \
> (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
> shareverbs# gpt show wd0
> start size index contents
> 0 1 PMBR
> 1 1 Pri GPT header
> 2 32 Pri GPT table
> 34 5860533101 Unused
> 5860533135 32 Sec GPT table
> 5860533167 1 Sec GPT header
>
> Thank you, thank you, thank you.
>
> On 6/20/19, 10:06 AM, "Jason Thorpe" <thorpej@me.com> wrote:
>
>
>
> > On Jun 20, 2019, at 4:03 PM, Ron Georgia <netverbs@gmail.com> wrote:
> >
> > Thank you very much. Compiling it now.
> > Sorry about that. I thought I was staying up to date with " cd /usr/pkgsrc && \
> > cvs update -dP"
>
> Note that if you are running a reasonably current -current, you can use \
> installboot(8) (or the cross-tools nbinstallboot) to install the u-boot image onto \
> the SD card / image. It's a whole lot nicer / less-scary than using dd.
> >
> > On 6/20/19, 9:50 AM, "Jason Thorpe" <thorpej@me.com> wrote:
> >
> >
> >
> > > On Jun 20, 2019, at 3:03 PM, Ron Georgia <netverbs@gmail.com> wrote:
> > >
> > > I do not see that in sysutils.
> > > $ /u/p/sysutils> ls | grep banana
> > > u-boot-bananapi
> > > u-boot-bananapi-m3
> > > u-boot-bananapi-r2
> > >
> > > rgeorgia@clement /u/pkgsrc> sudo find . -type f | grep bananapro
> > > not found
> >
> > Your pkgsrc may be out of date; I added it on May 29:
> >
> > revision 1.1
> > date: 2019-05-29 03:24:02 +0000; author: thorpej; state: Exp; commitid: \
> > Bt9LqdFk6D5U53pB; Add a U-Boot package for the LeMaker Banana Pro.
> >
> >
> > >
> > > On 6/20/19, 8:47 AM, "Jared McNeill" <jmcneill@invisible.ca> wrote:
> > >
> > > You cannot use U-boot for a different board and expect anything to work.
> > > Have you tried sysutils/u-boot-bananapro ?
> > >
> > > On Tue, 18 Jun 2019, Ron Georgia wrote:
> > >
> > > > I am trying to install NetBSD on a Banana pi pro. I downloaded armv7 from \
> > > > http://nycdn.netbsd.org/pub/NetBSD-daily/HEAD/latest/evbarm-earmv7hf/binary/gzimg/armv7.img.gz
> > > >
> > > > I dd the image to sd0d
> > > > $ sudo dd if=armv7_HEAD.img of=/dev/rsd0d bs=1m conv=sync
> > > >
> > > > I then tried both bananapi u-boot image from =/usr/pkg/share/u-boot based on \
> > > > the wiki found here: \
> > > > https://wiki.netbsd.org/ports/evbarm/install_using_sysinst/
> > > > $ sudo dd if=/usr/pkg/share/u-boot/bananapi/u-boot-sunxi-with-spl.bin \
> > > > of=/dev/rsd0d bs=1k seek=8 conv=sync $ sudo dd \
> > > > if=/usr/pkg/share/u-boot/bananapi-m3/u-boot-sunxi-with-spl.bin of=/dev/rsd0d \
> > > > bs=1k seek=8 conv=sync
> > > > Note: the documentation says of=/dev/rld0d bs=1k seek=8 conv=sync. Notice the \
> > > > rld0d not rsd0d. Is that right?
> > > > Any help is appreciated.
> > > >
> > > > The boot.cmd does not match what the docs says it should be.
> > > > I looked at boot.cmd:
> > > >
> > > > if test "${board}" = "am335x" ; then
> > > > setenv kernel netbsd-BEAGLEBONE.ub
> > > > setenv mmcpart 0:1
> > > > setenv bootargs root=ld0a
> > > > else
> > > > setenv use_efi 1
> > > > fi
> > > >
> > > > if test "${soc}" = "tegra210" ; then
> > > > # enable PCIe
> > > > pci enum
> > > > fi
> > > >
> > > > if test "${use_efi}" = "1" ; then
> > > > setenv boot_scripts
> > > > setenv boot_script_dhcp
> > > > run distro_bootcmd
> > > > else
> > > > fatload mmc ${mmcpart} ${kernel_addr_r} ${kernel}
> > > > bootm ${kernel_addr_r} ${bootargs}
> > > > fi
> > > >
> > > > ================================ boot.ini ================================
> > > > ODROIDC-UBOOT-CONFIG
> > > >
> > > > setenv bootargs "awge0.mac-address=${ethaddr}"
> > > > setenv bootcmd "fatload mmc 0:1 0x21000000 netbsd-GENERIC.ub; fatload mmc 0:1 \
> > > > 0x20000000 meson8b-odroidc1.dtb; bootm 0x21000000 - 0x20000000" run bootcmd
> > > >
> > > > ================================ cmdline.txt ================================
> > > > root=ld0a console=fb
> > > > #fb=1280x1024 # to select a mode, otherwise try EDID
> > > > #fb=disable # to disable fb completely
> > > >
> > > > ================================ Config.txt ================================
> > > > # Boot options, see \
> > > > https://www.raspberrypi.org/documentation/configuration/config-txt/boot.md \
> > > > kernel_address=0x01000040 # UART settings, see \
> > > > https://www.raspberrypi.org/documentation/configuration/uart.md enable_uart=1
> > > > force_turbo=0
> > > >
> > > >
> > > > Ron Georgia
> > > > "90% of my problems are due to ignorance, the other 10% is because I just \
> > > > don't know any better."
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> > -- thorpej
> >
> >
> >
> >
>
> -- thorpej
>
>
>
>
-- thorpej
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic