[prev in list] [next in list] [prev in thread] [next in thread]
List: net-snmp-coders
Subject: Re: Problems with ssCpu results; Graphing CPU Usage
From: Matthew Boehm <mboehm () cytelcom ! com>
Date: 2005-08-26 19:19:18
Message-ID: 430F6B36.8000900 () cytelcom ! com
[Download RAW message or body]
Dave Shield wrote:
> Ummm....
> What exactly is wrong with these figures?
Check out the sample graph from the NET-SNMP tutorial:
http://net-snmp.sourceforge.net/tutorial/tutorial-4/mrtg/kontor.cpu.html
Compare that with 'My' user vs. idle:
http://cytrex.cytelcom.com/cgi-bin/14all.cgi?log=asterisk_user_idle
My idle shows NaN. But if I query it directly:
[root@cytrex2 asterisk]# snmpwalk -v 2c -c public local ssCpuRawIdle.0
UCD-SNMP-MIB::ssCpuRawIdle.0 = Counter32: 226102585
> It's only
> when there are two successive readings that MRTG can plot the
> difference between them.
MRTG is probably graphing correctly. My concern is that if you look
at this graph of mine:
http://cytrex.cytelcom.com/cgi-bin/14all.cgi?log=asterisk_user_system
Which is User vs. System, you can see that the system usage never
drops below 10%. I watched this system last night using "top" and never
once did my idle time get below 98% for the 15 min I watched it. Even my
load avgs where all 0.
-Matthew
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Net-snmp-coders mailing list
Net-snmp-coders@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic