[prev in list] [next in list] [prev in thread] [next in thread]
List: net-snmp-bugs
Subject: [ net-snmp-Bugs-2538101 ] Net-snmp 5.4.2.1 - error in interface
From: "SourceForge.net" <noreply () sourceforge ! net>
Date: 2009-01-26 17:10:20
Message-ID: E1LRUya-0002Pi-CC () d55xhf1 ! ch3 ! sourceforge ! com
[Download RAW message or body]
Bugs item #2538101, was opened at 2009-01-26 19:10
Message generated for change (Tracker Item Submitted) made by Item Submitter
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=112694&aid=2538101&group_id=12694
Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: None
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: NiTr0 (nitr0man)
Assigned to: Nobody/Anonymous (nobody)
Summary: Net-snmp 5.4.2.1 - error in interface enumeration
Initial Comment:
I use latest (5.4.2.1) net-snmp daemon, and on "snmpwalk -v 3 -l AuthNoPriv -u user \
-A pass 192.168.x.x .1.3.6.1.2.1.2.2.1.2" I get that interface list with duplicate \
entries:
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: sit0
IF-MIB::ifDescr.17297 = STRING: ppp0
IF-MIB::ifDescr.17300 = STRING: ppp0
IF-MIB::ifDescr.17302 = STRING: ppp0
IF-MIB::ifDescr.17303 = STRING: ppp0
IF-MIB::ifDescr.17305 = STRING: ppp0
IF-MIB::ifDescr.17306 = STRING: ppp1
IF-MIB::ifDescr.17307 = STRING: ppp2
"ip a" shows that:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc htb qlen 1000
link/ether 00:07:e9:00:00:20 brd ff:ff:ff:ff:ff:ff
inet 192.168.xxx.xxx/24 brd 192.168.xxx.xxx scope global eth0
inet6 fe80::207:e9ff:fe0a:f420/64 scope link
valid_lft forever preferred_lft forever
3: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
17305: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1400 qdisc htb qlen 3
link/ppp
inet 172.31.255.2 peer xxx.xxx.133.5/32 scope global ppp0
17306: ppp1: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1400 qdisc htb qlen 3
link/ppp
inet 172.31.255.2 peer xxx.xxx.134.216/32 scope global ppp1
Also I have an error "error on subcontainer 'ia_addr' insert (-1)" in logs, which is \
caused by same server-side IPs of tunnels (but this IMHO doesn't violate standarts), \
and HUGE CPU and memory usage by snmpd...
P.S. IMHO it'll be great to identify ppp interfaces by both server&cient IPs, or to \
make possibility to exclude some kinds of interfaces from monitoring
----------------------------------------------------------------------
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=112694&aid=2538101&group_id=12694
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Net-snmp-bugs mailing list
Net-snmp-bugs@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/net-snmp-bugs
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic